01-24-2013, 11:01 AM | #1 |
Drives: 2013 Victory Red 2SS/RS Join Date: Nov 2011
Location: TX
Posts: 307
|
Front splitter fit??
Any of you 1LE owners having problems with the fitiment of your splitter on the sides right before the wheel well opening? Like not fiting flush against the bumper the last two/three inches or so. I installed mine and it was ok, then after about a week or so it has pulled away further. I've seen some pics of actual 1LE's on here and some seem to have the same issue. One person even said he "glued" his down. Just wondering if anyone else has this issue and what you've done about it? I really like this splitter that's why I put it on my '13 SS but I can't stand something not to fit right. It's held on by 32 rivets so ther is no "adjusting" that could be done. Install is fairly simple and mistake proof so I don't know what I could have done different?
|
01-24-2013, 11:53 AM | #2 |
Est.1775
Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009
Location: SoCal
Posts: 5,502
|
Some dealerships aren't installing them right. I've seen some flushed and some aren't.
|
01-24-2013, 12:01 PM | #3 |
Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010
Location: LAVAL (10 min. north of Montreal), CANADA
Posts: 3,526
|
What company - model did you buy?
__________________
T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...
|
01-24-2013, 01:25 PM | #4 |
Drives: 2013 1LE, Join Date: Nov 2012
Location: Columbia Md
Posts: 33
|
I got the first on at the dealership in early November. The side fit is horrible.
|
01-24-2013, 02:41 PM | #5 | |
Drives: 2013 Victory Red 2SS/RS Join Date: Nov 2011
Location: TX
Posts: 307
|
Quote:
It is a GM splitter, the same one stock on the 1LE. Yea, I'll figure something out. I can't stand it! |
|
01-24-2013, 10:05 PM | #6 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Mine is not flush either and all my friends notice and give me crap. It doesnt bother me much though easy fix.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
01-24-2013, 11:57 PM | #7 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Passenger side has a gap that is growing... driver's side is flush.
|
01-25-2013, 01:10 AM | #8 |
Loves Camaros
Drives: Red '79 Z28, '21 Red Hot M6 ZL-1! Join Date: Sep 2012
Location: Corpus Christi, TX
Posts: 1,623
|
Mine fits well and looks good, but the make ready "tech" left four fasteners off (that I've found missing so far...) Some dealer installs are better than others, but mine was fairly bad with respect for leaving necessary parts off.
Tara |
01-25-2013, 02:10 AM | #9 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
Mine looks wrong. I haven't had time to get to the dealer on it. Maybe tomorrow.
|
01-25-2013, 02:37 AM | #10 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
When I took delivery I was already aware of dealer install issues, so I checked and mine was perfectly flush. This thread just made me run down to check, and my passenger side is starting to pull away, but that's also the side that rubs every time I go up or down my driveway :( guess ill just have to live with it for now
|
01-25-2013, 10:49 AM | #11 |
Drives: 2013 Victory Red 2SS/RS Join Date: Nov 2011
Location: TX
Posts: 307
|
Yea, the install is not hard at all. I just think the tolerances are to close, so if you are off by just a hair it stresses certain areas. There are 32 rivits as I said so there is no readjusting that could be done. I may have to live with it. It sucks though. Part of the reason I got rid of my 2011 with GFX is because the fit of the GFX sucked so bad. I like everything to be neat and look like it's supposed to, not like I picked up a part from autozone and slapped it on there. SUCKS!!
|
01-25-2013, 12:51 PM | #12 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
Went to dealer today. They can't fix it. Ordering a new one from Chevrolet.
__________________
|
01-25-2013, 02:41 PM | #13 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
|
01-25-2013, 07:03 PM | #14 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
tramtwo posted this on the go |
|
|
|
|