Is there a easy fix for this cracks? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

C-redfly · 06-10-2014, 12:38 PM

I accidentally did this moving my stock bumper last night. The tip bent and has a crack now. Looking for a quick fix. Fingers crossed.
Name: uploadfromtaptalk1402421726386.jpg
Views: 290
Size: 32.7 KB

Name: uploadfromtaptalk1402421726386.jpg
Views: 290
Size: 32.7 KB

Name: uploadfromtaptalk1402421785317.jpg
Views: 277
Size: 22.7 KB

Sent from my SM-N900P using Tapatalk

DylanVK · 06-10-2014, 12:39 PM

I guess if you were REALLY careful and got some epoxy in there from the backside it would hold together... just have to be careful it doesn't bleed out thru the front when you press the parts together.

C-redfly · 06-10-2014, 04:58 PM

Quote:

Originally Posted by Dylan@SCG

I guess if you were REALLY careful and got some epoxy in there from the backside it would hold together... just have to be careful it doesn't bleed out thru the front when you press the parts together.

The crack is only on the outside, the corner bent inward causing the outside crack. You think I could do the epoxy from the front side to hold it together?

Sent from my SM-N900P using Tapatalk

06-10-2014, 12:38 PM	#1
C-redfly Drives: 2013 VR vert ZL1 Join Date: Aug 2012 Location: Los Angeles Posts: 1,495	Is there a easy fix for this cracks? I accidentally did this moving my stock bumper last night. The tip bent and has a crack now. Looking for a quick fix. Fingers crossed. Sent from my SM-N900P using Tapatalk

06-10-2014, 12:39 PM	#2
DylanVK Drives: a few Join Date: Mar 2014 Location: Colorado Posts: 507	I guess if you were REALLY careful and got some epoxy in there from the backside it would hold together... just have to be careful it doesn't bleed out thru the front when you press the parts together. __________________ *1967 C/10 PROJECT TRUCK \| DETAILING EXPERT \| CRAFT BEER ENTHUSIAST*