07-05-2016, 06:24 PM | #1 |
Drives: 2012 Camaro SS Convertible Join Date: Dec 2011
Location: Kentucky
Posts: 45
|
Help: PFADT ZL Spec Front End Link Bad
Hey guys. My Pfadt ZL Spec front Sway Bars came with PFadt adjustable end links up front for my 2012 SS. My front end link is bad. Any suggestions on a new front end link for my Pfadt sway bars?
__________________
2012 Camaro 2SS L99, Summit White with inferno orange stripes, 1" 7/8 Stainless Power Headers with hi-flo cats, Rotofab CAI, JRE SCT X3 Tune. PFADT Drop Springs and ZL spec front and rear sway bars.
|
07-05-2016, 07:02 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
The DSE links I just installed a set this weekend nice piece...
If you bar is drilled for the M12 stud they come with a spacer.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-05-2016, 08:07 PM | #3 |
Drives: 2018 Camaro ZL1 Join Date: Jun 2011
Location: Morgan, UT
Posts: 1,359
|
I wore out two sets of the Pfadt end links before I switched to the DSE pieces. They lasted longer than the Pfadts but ultimately got noisy too :(
Sent from my SM-G920V using Tapatalk
__________________
|
07-06-2016, 04:14 PM | #4 |
Drives: 2012 Camaro SS Convertible Join Date: Dec 2011
Location: Kentucky
Posts: 45
|
Retro, did the DSE end links need any modifying to fit the Pfadt sway bar! BMR is looking into if theirs will will work with the PFADT Sway Bar. Anyone have any feedback on those?
__________________
2012 Camaro 2SS L99, Summit White with inferno orange stripes, 1" 7/8 Stainless Power Headers with hi-flo cats, Rotofab CAI, JRE SCT X3 Tune. PFADT Drop Springs and ZL spec front and rear sway bars.
|
07-06-2016, 04:16 PM | #5 |
Drives: 2018 Camaro ZL1 Join Date: Jun 2011
Location: Morgan, UT
Posts: 1,359
|
I had to get the inserts from DSE so they would fit the Pfadt bar.
Sent from my SM-G920V using Tapatalk
__________________
|
|
|
|
|