You are browsing camaro5 
 |
|
03-06-2011, 04:15 PM
|
#1 |
|
STAY PUFT
Drives: Gone Join Date: Apr 2010
Location: Indiana
Posts: 329
|
How do I remove these?
 Ignore the yellow and red circles, this photo is just for reference. The push-pin style clips next to the yellow circles that hold the filler molding into place... how do I remove those? Car is going in tomorrow AM to fix some scratches... took apart the bumper myself to save $. Any help would be greatly appreciated... before I spend another hour in the cold cursing to myself trying to remove these little buggers....
__________________
2016 Hyper Blue Metallic 2LT RS - 6/13/2018-4/5/2022 SECOND 2010 Synergy Green Metallic - 5/4/2012-4/15/2016 2010 Synergy Green Metallic - 4/21/2010-7/15/2011 Last edited by SirPhobos1; 03-06-2011 at 04:54 PM. |
|
|
|
03-06-2011, 04:47 PM
|
#2 |
|
NEcamaro5
|
Use a small screw driver and push it into the little grove. The clips are in two peases. You pry the center up till it stops then you can pry the button out. I use soft touch pry tools.
|
|
|
|
|
03-06-2011, 04:55 PM
|
#3 |
|
STAY PUFT
Drives: Gone Join Date: Apr 2010
Location: Indiana
Posts: 329
|
Are you talking about the small ones, or the ones that are circled in yellow?
__________________
2016 Hyper Blue Metallic 2LT RS - 6/13/2018-4/5/2022 SECOND 2010 Synergy Green Metallic - 5/4/2012-4/15/2016 2010 Synergy Green Metallic - 4/21/2010-7/15/2011 |
|
|
|
|
03-06-2011, 06:41 PM
|
#4 |
 
Drives: 2011 Camaro Join Date: Sep 2010
Location: Felton,DE
Posts: 227
|
you talking about the rivets holding the plastic moldings/retainers on the bumper cover? best to just backtape the moldings.. is what i did.. since we didnt stock the rivets.
__________________
2017 Garnet red ZL1 A10 Procharged LME 427 L8T
|
|
|
|
|
03-06-2011, 06:45 PM
|
#5 |
|
STAY PUFT
Drives: Gone Join Date: Apr 2010
Location: Indiana
Posts: 329
|
I'm referring to the little retainers that hold the two pieces of black trim onto the bumper. You can see two of them directly above the mail slot.
Are they rivets, or are they just a P.I.T.A. to remove?
__________________
2016 Hyper Blue Metallic 2LT RS - 6/13/2018-4/5/2022 SECOND 2010 Synergy Green Metallic - 5/4/2012-4/15/2016 2010 Synergy Green Metallic - 4/21/2010-7/15/2011 |
|
|
|
|
03-06-2011, 06:47 PM
|
#6 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
They don't come out there only for looks.
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: LS3 Camshaft Install (a lot of pictures, may take a moment to load) | robertway | Camaro DIY & HOW-TO instructions & discussions | 313 | 12-16-2023 06:53 PM |
| Pfadt Race Engineering DIY Drop Spring installation procedure | PfadtRacing | Suspension / Chassis / Brakes | 20 | 09-23-2011 09:31 PM |
| Destroyed my paint job | HotBody | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 38 | 11-23-2010 06:54 PM |
| Remove Wiper Scratches using Lake Country's Glass Kit | Angelo@Autopia | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 1 | 05-22-2010 07:51 PM |
| cam installation | kozzmo49 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 27 | 08-30-2009 04:42 PM |
