03-21-2015, 01:27 AM | #1 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
Good ridge Brake line Torque numbers?
http://youtu.be/remR4Ev5NRk
So I'm going to be changing out my rotors for new ones and calipers from the Mike the powdercoater and goodridge stainless steel brake lines like in the video. What are the torque numbers for Brake line to Caliper? Brake line to mounting place in the middle? Brake line to the OEM brake line from master cylinder? Hope that makes sense. Also to clarify and/ or make sure I got the numbers right on these... Rear Brembo caliper Bolts are 30 ft/lbs + 90 degrees with blue loctite? Front Brembo caliper bolts are 44ft/lbs + 90 degrees with blue loctite? (Yes I have new Bolts because these are TTY) T30 bit that holds the rotor on is 8ft/lbs?
__________________
2010 Camaro 2SS/RS
|
03-21-2015, 11:40 AM | #2 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
Bump
__________________
2010 Camaro 2SS/RS
|
03-21-2015, 10:09 PM | #3 |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,335
|
Don't recall but the brake line to caliper bolt torque is in the included instructions. I think it was less than the factor lines the fittings look to be brass.
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
03-23-2015, 01:13 PM | #4 |
Casey Woodside
Drives: a very fun car Join Date: Jun 2010
Location: Tn
Posts: 1,906
|
it said between 24 and 32 i put mine on 29 on the line to the brake caliper
i used the goodridge ss lines all so work grate
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w |
03-25-2015, 12:17 PM | #5 | |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
Quote:
Also, what sealant did you use on the bleeder screws?
__________________
2010 Camaro 2SS/RS
|
|
03-25-2015, 10:39 PM | #6 |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,335
|
Sealant? None. Just snug them down, don't over-tighten.
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
03-25-2015, 11:35 PM | #7 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
Yup...figured as much. Saw somebody posts that said they used a sealant. I thought weird. Thanks
__________________
2010 Camaro 2SS/RS
|
|
|
|
|