SS emblem on trunk - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

scythezo6 · 03-08-2010, 05:07 PM

Hey guys I got a question. I'm having my trunk blacked out and I'm wandering if I have to bend the SS emblem (5" Trailblazer emblem) to have it put on? The emblem is flat and I think where the read bowtie was has an angle on the surface. Thanks guys.

Allshow · 03-08-2010, 07:35 PM

I have the rear SS emblems bent to fit in the 5th gen font to match the fronts.

scythezo6 · 03-09-2010, 12:40 PM

Quote:

Originally Posted by Allshow

I have the rear SS emblems bent to fit in the 5th gen font to match the fronts.

I may have to pick one of these up too, the one for the 06 trail blazer SS i have is flat and I'll have to bend it to go on the trunk where the bowtie was.

TwoEcho · 03-09-2010, 12:52 PM

Back is flat. The emblem on the grill is the one with the angles...

2010 SSRS · 03-09-2010, 01:26 PM

I hope someone makes the 2010 SS emblem to directly fit where the front bowtie is witout having to bend it.

scythezo6 · 03-09-2010, 02:21 PM

The trunk panel is not flat. I'll post a pic later showing there is an angle where the emblem needs to bend. The pic will show the emblem resting on the angle.

Hylton · 03-09-2010, 02:23 PM

I had to bend mine but it is very flexible and you only have to bend it slightly.

ac223mal · 03-09-2010, 03:35 PM

Here's mine, yes the emblem will bend enough to match the bend in the trunk and it covers up the holes.

http://www.camaro5.com/forums/showthread.php?t=58490

scythezo6 · 03-09-2010, 03:44 PM

Quote:

Originally Posted by Hylton

I had to bend mine but it is very flexible and you only have to bend it slightly.

Quote:

Here's mine, yes the emblem will bend enough to match the bend in the trunk and it covers up the holes.

http://www.camaro5.com/forums/showthread.php?t=58490

Thanks guys. I'll try it out when my vinyl gets put on. Its been so windy here that I don't want dust to get under the vinyl as it is getting laid. Desert + wind = suck.

or Blow. which ever.

Genious · 03-09-2010, 04:24 PM

03-08-2010, 05:07 PM	#1
scythezo6 Virologist in the making Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009 Location: El Paso TX Posts: 2,865	SS emblem on trunk Hey guys I got a question. I'm having my trunk blacked out and I'm wandering if I have to bend the SS emblem (5" Trailblazer emblem) to have it put on? The emblem is flat and I think where the read bowtie was has an angle on the surface. Thanks guys. __________________ Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family 6000, Delivered to the customer - 12/21/09

03-09-2010, 12:52 PM	#4
TwoEcho Whiskey Tango Foxtrot Drives: 2010 Camaro 2SS-Imperial Blue Join Date: Sep 2009 Location: Charleston AFB, SC Posts: 227	Back is flat. The emblem on the grill is the one with the angles... __________________ "Some people are like slinkies. Not really good for anything, but you can't help but smile when you see one tumble down the stairs"

03-09-2010, 02:21 PM	#6
scythezo6 Virologist in the making Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009 Location: El Paso TX Posts: 2,865	The trunk panel is not flat. I'll post a pic later showing there is an angle where the emblem needs to bend. The pic will show the emblem resting on the angle. __________________ Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family 6000, Delivered to the customer - 12/21/09

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone making an SS center grille emblem?	AntivenomSS	Cosmetics and Lighting Modification Discussions	40	02-04-2012 07:03 PM
Painting SS emblem	scythezo6	Cosmetics and Lighting Modification Discussions	6	02-09-2010 08:32 PM
Modern SS emblem for grille	fourmz	Cosmetics and Lighting Modification Discussions	2	11-01-2009 10:15 PM
SS / RS trunk lid emblem redesign	dragonZ28	Cosmetics and Lighting Modification Discussions	91	10-08-2009 07:38 PM

03-08-2010, 07:35 PM	#2
Allshow Drives: Trans Am Join Date: Sep 2009 Location: Grand Rapids Posts: 215	I have the rear SS emblems bent to fit in the 5th gen font to match the fronts.

03-09-2010, 01:26 PM	#5
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	I hope someone makes the 2010 SS emblem to directly fit where the front bowtie is witout having to bend it.

03-09-2010, 02:23 PM	#7
Hylton Drives: fanboys and ass kissers crazy. Join Date: May 2008 Location: Ottawa, Ontario Posts: 7,280	I had to bend mine but it is very flexible and you only have to bend it slightly.

03-09-2010, 03:35 PM	#8
ac223mal Drives: car Join Date: Nov 2008 Location: location Posts: 571 View My Garage	Here's mine, yes the emblem will bend enough to match the bend in the trunk and it covers up the holes. http://www.camaro5.com/forums/showthread.php?t=58490

03-09-2010, 04:24 PM	#10
Genious Army EOD Tech Drives: 2010 Camaro SS Join Date: Nov 2009 Location: Fort in the Hood, Texas Posts: 698