Wheel Fitment/Offset Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

d_jensen35 · 07-22-2016, 01:57 PM

I ordered a set of Niche Misano wheels for my Camaro. I did some research beforehand and made sure they would fit, but as I sit waiting for them, I am getting anxious. So if anyone could help me out that would be great. The rears are the only ones I'm worried about. They are a 20x10.5 +35 offset. Can someone let me know about how much further they will stick out over the stock 20x9 ?
Any help would be greatly appreciated. Thanks

Trevondo89 · 07-22-2016, 05:13 PM

They should actually fit just about flush. I have the same wheel width/offset on my Verde Axis wheels. Rears fitment is perfect, does not poke out past the fender at all. If you look at the stock wheels, they are actually far from flush which I hated. I'm sure you will like them.

Carlos_MRRWheelsInc · 07-22-2016, 05:33 PM

Our MRR M228 wheels are 20x11 43et and when we compare that to a 20x10.5 35et
is only 2mm difference so you wont poke out at all, will be fairly flush.

1JEWLDSSRS · 07-23-2016, 02:37 PM

I have some American Racing VN805 BLVD's 20x10 on the rear with +38 with 315's on them and they are right flush straight down with the fender. You will be fine.

07-22-2016, 01:57 PM	#1
d_jensen35 Drives: 2015 Camaro 2LT/RS Join Date: Dec 2015 Location: Ooltewah, TN Posts: 15	Wheel Fitment/Offset Question I ordered a set of Niche Misano wheels for my Camaro. I did some research beforehand and made sure they would fit, but as I sit waiting for them, I am getting anxious. So if anyone could help me out that would be great. The rears are the only ones I'm worried about. They are a 20x10.5 +35 offset. Can someone let me know about how much further they will stick out over the stock 20x9 ? Any help would be greatly appreciated. Thanks

07-22-2016, 05:13 PM	#2
Trevondo89 Drives: 2015 Chevy Camaro SS Join Date: Apr 2016 Location: Itasca, IL Posts: 44	They should actually fit just about flush. I have the same wheel width/offset on my Verde Axis wheels. Rears fitment is perfect, does not poke out past the fender at all. If you look at the stock wheels, they are actually far from flush which I hated. I'm sure you will like them. __________________ Chevy is life 2015 Camaro 1SS LS3 2003 Monte Carlo SS

07-23-2016, 02:37 PM	#4
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,402	I have some American Racing VN805 BLVD's 20x10 on the rear with +38 with 315's on them and they are right flush straight down with the fender. You will be fine. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

07-22-2016, 05:33 PM	#3
Carlos_MRRWheelsInc Drives: camaro Join Date: Nov 2011 Location: los angeles ca Posts: 404	Our MRR M228 wheels are 20x11 43et and when we compare that to a 20x10.5 35et is only 2mm difference so you wont poke out at all, will be fairly flush.