Looking for an X-pipe? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlownSS · 11-03-2009, 11:00 AM

I was looking for an x-pipe to put in while I am doing my muffler delete on my 2010 Camaro lS3. I did ALOT of searching and found that the correct Magnaflow Part number is 10791. I ordered it from here . I found alot of places that had them for about 84 bucks plus shipping . I finally found it here for $72.05 Delivered free! Just thought I would tell you of a good deal that I found.

http://www.allmagnaflow.com/product.php?productid=761.

Jekyll-N-Hyde · 11-03-2009, 11:02 AM

is it just me or does this look more like an X pipe than what comes with the ARH system ? To me that looks like 2 pieces of pipe butted up against one another.

rcracer78 · 11-03-2009, 11:29 AM

Solo Performance!

You can buy the x-pipe individually or the whole catback system, which I highly recommend. Here is the link:

http://www.camaro5.com/forums/showth...lo+performance

-

Camar0wn3d · 11-03-2009, 11:39 AM

Quote:

Originally Posted by rcracer78

Solo Performance!

You can buy the x-pipe individually or the whole catback system, which I highly recommend. Here is the link:

http://www.camaro5.com/forums/showth...lo+performance

-

+1....sounds AMAZING with headers too..

franknbeans · 11-03-2009, 12:08 PM

billy:

Have some questions you MAY have the answer to. I have the Magnaflow street system. . Instead of the x-pipe there is a resonator. Two in / Two out.

Will this xpipe fit exactly in place of that resonator?

If you don't know the answer to this, could you measure the length and with of the xpipe?

Davis · 11-03-2009, 12:18 PM

Quote:

Originally Posted by rcracer78

Solo Performance!

You can buy the x-pipe individually..... -

I went to the link but could not find pricing for just the X-pipe?
Did I miss it?

BlownSS · 11-03-2009, 12:56 PM

Quote:

Originally Posted by franknbeans

billy:

Have some questions you MAY have the answer to. I have the Magnaflow street system. . Instead of the x-pipe there is a resonator. Two in / Two out.

Will this xpipe fit exactly in place of that resonator?

If you don't know the answer to this, could you measure the length and with of the xpipe?

Sorry, I do not know the answer to that question but I would bet that a call to the Magnaflow customer assistance line would either yield you and answer!

ADM PERFORMANCE · 11-05-2009, 08:12 PM

I have 3" x pipes for $49.95 in 304 stainless.

Almost exactly like the Magnaflow,But better.

Andy

Davis · 11-05-2009, 09:03 PM

Quote:

Originally Posted by ADM PERFORMANCE

I have 3" x pipes for $49.95 in 304 stainless.

Almost exactly like the Magnaflow,But better.

Andy

I'm interested. Can you explain how yours is better?

Mikes SS · 11-05-2009, 09:18 PM

silly question, but what makes an X-pipe better that just true duals? Seems it would change the note, tone and lope of an engine?

Davis · 11-06-2009, 06:58 AM

Quote:

Originally Posted by Mikes SS

silly question, but what makes an X-pipe better that just true duals? Seems it would change the note, tone and lope of an engine?

I'm sure the experts will correct me if I'm wrong. But the way I understand it is; that when you combine dual exhaust with an x-pipe you allow one side to help the other with scavenging.

*CamaroSpike23* · 11-06-2009, 10:16 AM

Quote:

Originally Posted by Davis

I'm sure the experts will correct me if I'm wrong. But the way I understand it is; that when you combine dual exhaust with an x-pipe you allow one side to help the other with scavenging.

pretty much.

towmoe · 11-06-2009, 12:04 PM

Quote:

Originally Posted by ADM PERFORMANCE

I have 3" x pipes for $49.95 in 304 stainless.

Almost exactly like the Magnaflow,But better.

Andy

But this will not fit on a stock 2.5" system will it?

Edrock · 11-06-2009, 12:17 PM

Quote:

Originally Posted by Jekyll-N-Hyde

is it just me or does this look more like an X pipe than what comes with the ARH system ? To me that looks like 2 pieces of pipe butted up against one another.

Looks like an X-pipe to me. I have noticed different Mfgs. making different looking X-pipes though. To give a pictorial example, it like "X" vs. "x". Some X-pipes are stretched out long and others are scrunched up short like the OP's.

11-03-2009, 11:00 AM	#1
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	Looking for an X-pipe? I was looking for an x-pipe to put in while I am doing my muffler delete on my 2010 Camaro lS3. I did ALOT of searching and found that the correct Magnaflow Part number is 10791. I ordered it from here . I found alot of places that had them for about 84 bucks plus shipping . I finally found it here for $72.05 Delivered free! Just thought I would tell you of a good deal that I found. http://www.allmagnaflow.com/product.php?productid=761. __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.

11-03-2009, 12:08 PM	#5
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	billy: Have some questions you MAY have the answer to. I have the Magnaflow street system. . Instead of the x-pipe there is a resonator. Two in / Two out. Will this xpipe fit exactly in place of that resonator? If you don't know the answer to this, could you measure the length and with of the xpipe? __________________ Car of the week 7/7/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
g5cr cai system anybody install or looking at one "pics"	camarossrs2150	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	41	07-14-2011 08:26 PM
Hot air Intakes -By Kenne bell	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	66	02-08-2011 08:33 PM
H pipes are a must	Pyottboy	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	30	05-16-2010 08:55 AM
List of Intakes that will work with the TVS-2300 MagnaCharger	JJ2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	03-19-2010 02:11 AM
AirAid Cold Air Intake anyone?	FLYNNZL1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	12	01-01-2010 09:05 PM

11-03-2009, 11:02 AM	#2
Jekyll-N-Hyde I put the FU back in FUN Drives: 1969 SS 396 , 2010 Camaro SS Join Date: Jun 2009 Location: Between Weatherford and Azle TX hway730 Posts: 2,129	is it just me or does this look more like an X pipe than what comes with the ARH system ? To me that looks like 2 pieces of pipe butted up against one another.

11-03-2009, 11:29 AM	#3
rcracer78 Drives: 2010 Camaro 2SS Join Date: Jun 2009 Location: CA Posts: 211	Solo Performance! You can buy the x-pipe individually or the whole catback system, which I highly recommend. Here is the link: http://www.camaro5.com/forums/showth...lo+performance -

11-05-2009, 08:12 PM	#8
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	I have 3" x pipes for $49.95 in 304 stainless. Almost exactly like the Magnaflow,But better. Andy

11-05-2009, 09:18 PM	#10
Mikes SS Drives: '10 CGM 2SS/RS 6M Join Date: Oct 2009 Location: North Central Florida Posts: 1,032 View My Garage	silly question, but what makes an X-pipe better that just true duals? Seems it would change the note, tone and lope of an engine?