Flowmaster Mufflers Only - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZuluKilla8 · 01-06-2010, 10:04 AM

Hey every one, Im gonna be getting a set of Flowmaster Mufflers instead of the whole axle back system, basically to save money and just for the sound rather then performance...Which seires would give me the deepest loudest badd A$$ sound of them all, and which size/inlet/outlet are the proper mufflers to fit on.

Thanks!!

ZuluKilla8 · 01-06-2010, 10:58 AM

10-4, whats the Inlet/Outlet off set on these and the pipe size...id check it out myself but my car is stored in a garage awhile away from me as I drive my mini van during the winter months

87irocz · 01-06-2010, 11:32 AM

I went to a muffler shop about 2 months ago and tried to do this. He called Flowmaster to see if there was a muffler that would fit and they said no. I asked the muffler shop if they could make one fit and they said no to that also. I ended up buying the Borla Stinger axle back.

TheClassicCarKid · 01-06-2010, 11:34 AM

40 series,
maybe super 44

they have sound clips on their website so you can get an idea of the differences

ZuluKilla8 · 01-06-2010, 11:57 AM

Nice, well thats no good if they dont have any that fit

TommyTSquared · 01-06-2010, 12:25 PM

Quote:

Originally Posted by 87irocz

I went to a muffler shop about 2 months ago and tried to do this. He called Flowmaster to see if there was a muffler that would fit and they said no. I asked the muffler shop if they could make one fit and they said no to that also. I ended up buying the Borla Stinger axle back.

How well do you trust this shop? Something doesn't sound right about that to me. Granted I'm going with deletes, but I'd think they should be able to make them fit.

Iwantone2 · 01-06-2010, 12:39 PM

Quote:

Originally Posted by 87irocz

I went to a muffler shop about 2 months ago and tried to do this. He called Flowmaster to see if there was a muffler that would fit and they said no. I asked the muffler shop if they could make one fit and they said no to that also. I ended up buying the Borla Stinger axle back.

Wow, that' s a good way to lose a customer...They could have always just fabricated a bit of tubing to make it fit.

ZulaKilla, have you asked your local shop about being able to do the work?

firstmate · 01-06-2010, 12:43 PM

I had Flowmaster put on my car. I think they are something kind of standard, and I believe they were called 2 chamber or something. It definitely sounded better than it did from the factory, and they didn't say anything about having to "make" them work, they just put them on. I went back and had the two resonators removed and had plain pipe put in their place to give it a bit more sound. I would still like it a little louder, but will probably just leave it the way it is. And before you say anything about me not knowing exactly what was put on, I am a female, and just told them I wanted Flows put on...

rharp · 01-06-2010, 12:49 PM

i put the 40 series on my 2ss rs m6, evan took the resonators off,
not very loud, should have gone with 44 series.

2010 SSRS · 01-06-2010, 12:52 PM

Use the flowmaster mufflers that come with the american thunder system for the 2010 Camaro's.

Pope Designs · 01-06-2010, 12:54 PM

I had 40's on my car also. They sounded great. I deleted resonators also. They do fit but are very tight. I would go with Super 44's if I were you. I have heard good things about them as well.

Bryan

2SSRSPILOT · 01-06-2010, 02:52 PM

I came accross a link somewhere on thi site that showed a vid.of a guy installing a set of flowmaster replacement "mufflers only" on a 2010.
I didn,t get the p/n but all he did was cut the pipe like 10" before the stock muff. with a sawsall and slid them out then slid the new f/m in place.
They come w/hangers & fit gnd.af cars.
Really slick.
I WILL find the p/n because this is what I am going with

ZuluKilla8 · 01-06-2010, 03:02 PM

I sent Flowmaster an e-mail, will see how long it takes to reply back!

tjbusa · 01-06-2010, 03:07 PM

01-06-2010, 10:04 AM	#1
ZuluKilla8 Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010 Location: NJ Posts: 831	Flowmaster Mufflers Only Hey every one, Im gonna be getting a set of Flowmaster Mufflers instead of the whole axle back system, basically to save money and just for the sound rather then performance...Which seires would give me the deepest loudest badd A$$ sound of them all, and which size/inlet/outlet are the proper mufflers to fit on. Thanks!!

01-06-2010, 11:32 AM	#3
87irocz Intermediate Member Drives: 2010 Camaro SS/RS Join Date: Apr 2009 Location: Elberton, GA Posts: 78	I went to a muffler shop about 2 months ago and tried to do this. He called Flowmaster to see if there was a muffler that would fit and they said no. I asked the muffler shop if they could make one fit and they said no to that also. I ended up buying the Borla Stinger axle back. __________________ VR 1SS/RS, LS3, Polished Wheels 1100 - 09 Apr 09.............4B00 - 2 July 09 3000 - 28 May 09............4200 - 22 July 09 3400 - 18 Jun 09.............Delivered - 9 Aug 09 TPW - 29 Jun 09 Last edited by 87irocz; 01-06-2010 at 11:34 AM. Reason: spelling

01-06-2010, 12:43 PM	#8
firstmate Drives: 2010 Blk/Gry SS/RS M6 Join Date: May 2009 Location: Houston Posts: 454 View My Garage	I have Flowmaster... I had Flowmaster put on my car. I think they are something kind of standard, and I believe they were called 2 chamber or something. It definitely sounded better than it did from the factory, and they didn't say anything about having to "make" them work, they just put them on. I went back and had the two resonators removed and had plain pipe put in their place to give it a bit more sound. I would still like it a little louder, but will probably just leave it the way it is. And before you say anything about me not knowing exactly what was put on, I am a female, and just told them I wanted Flows put on... __________________ Ordered 10-13-08 2SS/RS M6 BLK/GRY VIN #2386 Delivered 6-11-09 - Woo Hoo!!! Hey Houston locals-------- Join the H-Town Camaro Club www.H-TownCamaroClub.com

01-06-2010, 02:52 PM	#12
2SSRSPILOT Drives: 2010 2 SS RS IMP.BL.MET. GRND.EFCT. Join Date: Dec 2009 Location: Gansevoort, NY Posts: 14	FLOWMASTERS I came accross a link somewhere on thi site that showed a vid.of a guy installing a set of flowmaster replacement "mufflers only" on a 2010. I didn,t get the p/n but all he did was cut the pipe like 10" before the stock muff. with a sawsall and slid them out then slid the new f/m in place. They come w/hangers & fit gnd.af cars. Really slick. I WILL find the p/n because this is what I am going with

01-06-2010, 03:07 PM	#14
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	__________________ ************************************* Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************

01-06-2010, 10:58 AM	#2
ZuluKilla8 Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010 Location: NJ Posts: 831	10-4, whats the Inlet/Outlet off set on these and the pipe size...id check it out myself but my car is stored in a garage awhile away from me as I drive my mini van during the winter months

01-06-2010, 11:57 AM	#5
ZuluKilla8 Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010 Location: NJ Posts: 831	Nice, well thats no good if they dont have any that fit

01-06-2010, 12:49 PM	#9
rharp Drives: 2010 SVT Raptor/ 70 Chevelle SS 396 Join Date: Dec 2009 Location: Albuquerque NM Posts: 569	i put the 40 series on my 2ss rs m6, evan took the resonators off, not very loud, should have gone with 44 series.

01-06-2010, 12:52 PM	#10
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Use the flowmaster mufflers that come with the american thunder system for the 2010 Camaro's.

01-06-2010, 12:54 PM	#11
Pope Designs Drives: 2013 ZL1 Rally Yellow Join Date: May 2009 Location: Knightdale, NC Posts: 347	I had 40's on my car also. They sounded great. I deleted resonators also. They do fit but are very tight. I would go with Super 44's if I were you. I have heard good things about them as well. Bryan

01-06-2010, 03:02 PM	#13
ZuluKilla8 Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010 Location: NJ Posts: 831	I sent Flowmaster an e-mail, will see how long it takes to reply back!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flowmaster 40 Series Delta Flow mufflers on a V6	kga10734	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	32	02-11-2016 11:31 AM
Flowmaster Mufflers	alexdc	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	51	10-05-2010 05:15 PM
Flowmaster American Thunder Exhaust Kit from PHASTEK	Sean@Phastek	V8 Bolt-Ons & Tunes	20	06-09-2010 12:34 PM
flowmaster mufflers 40 series	Rags	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	14	10-03-2009 11:27 AM