Demodding sale thread

[Camarowguy]

everyone please refer to post one. I have what's sold listed in bold as "sold". Everything listed as sold, I have received payment for and is no longer available. I'm still getting pm's on stuff that's marked as sold. Please people, take the time to look at the first post. Thanks

[Camarowguy]

Price lowered on Vararam. Mirror price include shipping.

[2012blackcamaroSS]

how much for the JBA cats to 72032

[Camarowguy]

Originally Posted by 2012blackcamaroSS

how much for the JBA cats to 72032

They are staying on the car. I posted earlier if someone was interested to speak up within a few hours. I was off of work today removing everything. I decided they weren't worth removing if no one was interested. Car will be gone in the morning. Sorry.

[carrs_crew]

I am interested in the intake. I will be in denham springs the Monday after the Super Bowl. Tried searching and are their any negatives that you know of not having a tune and using this?

[Camarowguy]

Originally Posted by carrs_crew

I am interested in the intake. I will be in denham springs the Monday after the Super Bowl. Tried searching and are their any negatives that you know of not having a tune and using this?

I'm not sure. I didn't drive it far to have it tuned after I installed it. It seemed to drive fine but I didn't have to go but a couple miles. I'd suggest calling Vararam and see what they say. I don't want to sell someone something that won't work for them.

[Cervejasc]

still have the intake?

[Camarowguy]

Originally Posted by Cervejasc

still have the intake?

Yes.

[IndeedSS1]

Originally Posted by carrs_crew

I am interested in the intake. I will be in denham springs the Monday after the Super Bowl. Tried searching and are their any negatives that you know of not having a tune and using this?

I ran a tune only on a stock tune for a while without issue. But it appears from the picture, that the PCV line was relocated upstream of the MAF sensor on this unit. More than likely the fuel trims will be a fair amount off as it is much like running an open air valve cover breather. I'd have to go with definitely should have a tune.

[Camarowguy]

Originally Posted by IndeedSS1

I ran a tune only on a stock tune for a while without issue. But it appears from the picture, that the PCV line was relocated upstream of the MAF sensor on this unit. More than likely the fuel trims will be a fair amount off as it is much like running an open air valve cover breather. I'd have to go with definitely should have a tune.

It was after the maf from the get go. I didn't like how a hole was punch though the ugly red boot and the hose was just stuck into the hole. So I relocated it to the plastic part of the intake for a better hookup. Looks better too.

[carrs_crew]

Does this intake allow for larger intake and TB diameters? Like the nick Williams tb or fast intake?

[Camarowguy]

Originally Posted by carrs_crew

Does this intake allow for larger intake and TB diameters? Like the nick Williams tb or fast intake?

No idea. I'm sure the boot size would be the same. So moot point. The wall thickness of the tb is usually bored from the inside. Think about it. Everytime someone bought a bigger tb they would have to have a bigger intake made. Don't think they would sell too many tb's if that was the case.

[Cervejasc]

Pm sent for intake

[Camarowguy]

Mats sold. Intake pending.