Anyone Put A ZL1 Badge On Their Front Fender? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BigBoyBlue · 02-16-2014, 06:47 PM

I don't like the CAMARO lettering there, but was thinking of ZL1. Please post pictures. Will the ZL1 badge fit the angle of the fender? I don't think the fender is totally flat.

gregbzl1 · 02-16-2014, 07:23 PM

I have both emblems. The ZL1 emblem is the same as the deck lid.

ZL1-V · 02-16-2014, 07:54 PM

To the OP, I thought of doing that after removing the Camaro fender lettering. I hesitated due to ZL1 being on the front grille, deck lid, too redundant for me personally. Pull the Camaro and look at it without it being there a day or two?

Red Jewel RS · 02-16-2014, 07:54 PM

Nice idea. Looks good!

BigBoyBlue · 02-16-2014, 08:30 PM

Quote:

Originally Posted by gregbzl1

I have both emblems. The ZL1 emblem is the same as the deck lid.

Looks nice. Did the ZL1 fit flush?

Deke736 · 02-16-2014, 08:39 PM

I have custom ZL1 badges from Emblempros on my fender. I did remove mine from the hood, I didn't want too many emblems. My Camaro script is gone too.

BigBoyBlue · 02-16-2014, 08:56 PM

Really nice!!!

zl1bro · 02-16-2014, 09:03 PM

In the process of moving the ZL1 badge from hood to front fenders. Have already removed the Camaro lettering. Looks good plain but I think the ZL1 badge will look good in that spot. It's where they put the Z/28 badges..

gregbzl1 · 02-17-2014, 07:48 AM

Quote:

Originally Posted by BigBoyBlue

Looks nice. Did the ZL1 fit flush?

Yes, the 3 pieces are seperate pieces held in place with a small piece of foam for easy install.

gen=5 · 02-17-2014, 04:40 PM

I like the ZL1 on the hood,its where the factory put it,Although the Camaro on the fenders I am not that much in love with as they all have it..I like the Z28 on the fenders as it's factory,(always been on the sides)and I know that the factory goes though a approval process of many people to see where badges are liked the most,at least i remember reading that a while back..
The most important thing should be where you like it on your own car,unless your selling it to someone else or producing it to sell it a large group of people ,while trying to please most of them.
It's sort of like back in the 80's and 90's when certain groups started sticking the 5.0 mustang badges all over the car in different places.removing them i understand but having them all over the car i do not,re-installing in a different location is not a bad idea when done tastefully.
I just purchased a 2014 quad ram ,and the first thing i did was have the dealer remove the huge ram on the side,even before they sent it to be converted so i could drive it...
IF YOU LIKE IT DO IT..I LOVE THE CUSTOM ONE THAT WAS SHOWN..

John E · 02-17-2014, 05:21 PM

Anyone debadge one of these?

Emvici · 02-18-2014, 11:14 AM

I put this on my Front fender and I haven't gotten any opinions about it yet, but I personally like it.

vatechguy3 · 11-29-2014, 07:57 PM

Anyone else?

Im thinking of removing the camaro badges from the fenders and moving the hood badges to that spot. But the hood badges dont look flat. So im worried how that will look.

Tony

AbsolutHank · 11-29-2014, 08:06 PM

The hood badges are 100% flat

02-16-2014, 06:47 PM	#1
BigBoyBlue Go NY Giants & NY Rangers Drives: 2013 ZL1 M6 Join Date: Nov 2013 Location: Maryland Posts: 782	Anyone Put A ZL1 Badge On Their Front Fender? I don't like the CAMARO lettering there, but was thinking of ZL1. Please post pictures. Will the ZL1 badge fit the angle of the fender? I don't think the fender is totally flat. __________________ Molon Labe!

02-16-2014, 07:23 PM	#2
gregbzl1 Drives: 2022 ZL1-VIVID ORANGE-A10-CARBON FI Join Date: Aug 2012 Location: DILWORTH,MN Posts: 87	ZL1 EMBLEM I have both emblems. The ZL1 emblem is the same as the deck lid. Attached Images

02-16-2014, 08:39 PM	#6
Deke736 COTW 12/3/12 Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011 Location: Glen Carbon, IL Posts: 3,279	Anyone Put A ZL1 Badge On Their Front Fender? I have custom ZL1 badges from Emblempros on my fender. I did remove mine from the hood, I didn't want too many emblems. My Camaro script is gone too. __________________

02-16-2014, 08:56 PM	#7
BigBoyBlue Go NY Giants & NY Rangers Drives: 2013 ZL1 M6 Join Date: Nov 2013 Location: Maryland Posts: 782	Really nice!!! __________________ Molon Labe!

02-17-2014, 04:40 PM	#10
gen=5 Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011 Location: houston Posts: 1,313 View My Garage	I like the ZL1 on the hood,its where the factory put it,Although the Camaro on the fenders I am not that much in love with as they all have it..I like the Z28 on the fenders as it's factory,(always been on the sides)and I know that the factory goes though a approval process of many people to see where badges are liked the most,at least i remember reading that a while back.. The most important thing should be where you like it on your own car,unless your selling it to someone else or producing it to sell it a large group of people ,while trying to please most of them. It's sort of like back in the 80's and 90's when certain groups started sticking the 5.0 mustang badges all over the car in different places.removing them i understand but having them all over the car i do not,re-installing in a different location is not a bad idea when done tastefully. I just purchased a 2014 quad ram ,and the first thing i did was have the dealer remove the huge ram on the side,even before they sent it to be converted so i could drive it... IF YOU LIKE IT DO IT..I LOVE THE CUSTOM ONE THAT WAS SHOWN.. __________________ http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE . Last edited by gen=5; 02-17-2014 at 04:50 PM.

02-16-2014, 07:54 PM	#3
ZL1-V Drives: 2013 Camaro ZL1 Join Date: Dec 2012 Location: Dallas, Texas Posts: 2,155	To the OP, I thought of doing that after removing the Camaro fender lettering. I hesitated due to ZL1 being on the front grille, deck lid, too redundant for me personally. Pull the Camaro and look at it without it being there a day or two?

02-16-2014, 07:54 PM	#4
Red Jewel RS Drives: 2010 Camaro 2SS Join Date: Apr 2010 Location: Billings, MT Posts: 891 View My Garage	Nice idea. Looks good!

02-16-2014, 09:03 PM	#8
zl1bro Drives: 2013 ZL1 M6 SIM AGM mono stripe Join Date: Jul 2012 Location: Boston Posts: 453	In the process of moving the ZL1 badge from hood to front fenders. Have already removed the Camaro lettering. Looks good plain but I think the ZL1 badge will look good in that spot. It's where they put the Z/28 badges..

02-17-2014, 05:21 PM	#11
John E Drives: 2014 2SS rs 6M Join Date: Sep 2013 Location: Palm Beach Posts: 168	Anyone debadge one of these?

02-18-2014, 11:14 AM	#12
Emvici Drives: 2014 ZL1 White Convertible Join Date: Aug 2013 Location: St Pete Fl Posts: 682	I put this on my Front fender and I haven't gotten any opinions about it yet, but I personally like it. Attached Images

11-29-2014, 07:57 PM	#13
vatechguy3 Drives: 2014 ZL1 M6 Join Date: Jul 2014 Location: Virginia Posts: 493	Anyone else? Im thinking of removing the camaro badges from the fenders and moving the hood badges to that spot. But the hood badges dont look flat. So im worried how that will look. Tony __________________ 2014 ZL1 M6 Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq

11-29-2014, 08:06 PM	#14
AbsolutHank Drives: 2016 Corvette Z06 M6 Join Date: May 2009 Location: Odenton, MD Posts: 874	The hood badges are 100% flat __________________ 2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank *20/21 BC Forged Wheels : BC Coilovers: TA Aero*