GI: Richmond 4.10's - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

danhr · 01-25-2011, 09:19 AM

I have a brand new set of richmond 4.10's. These are the newer ones that came with the new instructions. I got them after I broke my old set and Richmond sent me these to replace them. They have been sitting since.

Wondering if anyone wants to buy them, because I want to step up to 4.33's. 4.10's just aren't enough for me.

2010 2-Tone · 01-25-2011, 09:20 AM

Price and does it come with installation kit?

blazzin1 · 01-25-2011, 09:25 AM

Do you have the install kit to sell with these, or are you just selling the gears? I'm wondering too if I should go with 4.10's or 4.33's. I don't have a 700hp drag car or anything (at least not yet), but not sure which would give me "bigger bang for the buck". What are you asking for your 4.10's?

danhr · 01-25-2011, 09:48 AM

I'm open to offers.... I'll have to look at what they go for nowadays later to get an accurate price. But if anyone who is sending their rear end to janetty to get their gears done, I will make it even cheaper, b/c I am going to send my rear to them to get 4.33's/posi mod/billet caps.

and no, i do not have an installation kit.

I want to go with 4.33's, because that would be putting me through the traps @ ~135 mph... which might be good for what ET I want to run.

01-25-2011, 09:19 AM	#1
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,023	GI: Richmond 4.10's I have a brand new set of richmond 4.10's. These are the newer ones that came with the new instructions. I got them after I broke my old set and Richmond sent me these to replace them. They have been sitting since. Wondering if anyone wants to buy them, because I want to step up to 4.33's. 4.10's just aren't enough for me. __________________ 2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph.

01-25-2011, 09:48 AM	#4
danhr BAMF SS Drives: 2016 Camaro 1SS A8 Join Date: Mar 2010 Location: Ford City, PA Posts: 3,023	I'm open to offers.... I'll have to look at what they go for nowadays later to get an accurate price. But if anyone who is sending their rear end to janetty to get their gears done, I will make it even cheaper, b/c I am going to send my rear to them to get 4.33's/posi mod/billet caps. and no, i do not have an installation kit. I want to go with 4.33's, because that would be putting me through the traps @ ~135 mph... which might be good for what ET I want to run. __________________ 2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Richmond 4.33 Rear End Gears Available At Apex Motorsports!!!	Apex Motorsports	Transmission / Driveline	84	05-13-2011 02:26 PM
Richmond 4.10's Update	GrinderSS	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	26	03-14-2011 09:31 PM
Richmond 4.10's Incinerated!	Wacker	Transmission / Driveline	57	09-21-2010 10:50 PM
Just "tested" my Richmond 4.10's	GrinderSS	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	5	07-15-2010 08:36 PM
4.10/3.73 Richmond Gears and Install Kits Now available at New Era!!!	SMGSS	Transmission / Driveline	6	07-08-2010 11:34 AM

01-25-2011, 09:20 AM	#2
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Price and does it come with installation kit?

01-25-2011, 09:25 AM	#3
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Do you have the install kit to sell with these, or are you just selling the gears? I'm wondering too if I should go with 4.10's or 4.33's. I don't have a 700hp drag car or anything (at least not yet), but not sure which would give me "bigger bang for the buck". What are you asking for your 4.10's?