You are browsing camaro5 
 |
|
02-04-2015, 09:48 PM
|
#1 |
  
|
Stainless works
So I ordered the "stainless power" by stainless works 1 7/8 long tubes with the Catless connections and the stainless works 3" retro chambered catback.
Anyone have this set up or anything close to it? I hear the chambered catback is probably the loudest catback for the SS? Let me know your experiences!
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
|
|
02-04-2015, 10:09 PM
|
#2 |
 
Drives: 2010 SS RS Join Date: Jan 2015
Location: AZ
Posts: 406
|
I have stainless power headers stock mid pipe and flowmaster mufflers. It sounds really good. Not too loud and has a good tone. There is a drone at about 800-1100rpm. It's only noticeable during cold start/warmup and cruising about 50 mph. So I don't really ever notice it. Above 3,000 rpm it has a noticeable roar that will turn heads.
|
|
|
|
|
02-04-2015, 10:29 PM
|
#3 |
 
|
I have the full set but with the stainworks longtube and performance connect retro keeping the whole 3in without the bottleneck but I can tell you theres no sound like it such a deep beautiful v8 sound i just recently cammed it and the looks and compliment fly everywhere
|
|
|
|
|
02-04-2015, 10:59 PM
|
#4 | |
|
|
Quote:
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
|
|
|
|
02-04-2015, 11:00 PM
|
#5 |
|
|
10 being complete Annihilation lol
I'm doing the night fury cam next
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
|
|
|
02-04-2015, 11:01 PM
|
#6 | |
|
|
Quote:
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
|
|
|
|
02-04-2015, 11:56 PM
|
#7 |
Drives: 2012 2SS 45TH Anniversary Join Date: Mar 2012
Location: Kentucky
Posts: 720
|
Have the stainless LTH w/ZL1 retro (cat less). Can't imagine a better sounding system😍
|
|
|
|
|
02-05-2015, 08:03 AM
|
#8 |
      
Drives: 2012 45th Anniversary 2SS LS3 Join Date: Feb 2012
Location: Charlotte, NC
Posts: 2,812
|
I have same setup. Here you go:
http://www.camaro5.com/forums/showpo...0&postcount=17
__________________
 |
|
|
|
|
02-05-2015, 09:28 AM
|
#9 |
Drives: 2006 F150 Lariat Join Date: May 2010
Location: Florida
Posts: 1,665
|
I'm running the same thing.
OP, it is very loud. You'll sit in your car, go WOT and think "Man, this exhaust is pretty loud" then you'll hear it outside your own car one day and you'll think "Holy shit this is really effing loud." I don't like going over 3k RPM's when I'm around other cars lol. Just got a warning for it a few weeks ago too. More than once I've had people say they heard me "hauling ass" when I'm at 1/4 throttle getting up to a 45mph speed limit. Do it. |
|
|
|
|
02-05-2015, 11:18 AM
|
#10 | |
|
|
Quote:
Yeah I already ordered everything. Just waiting for it all to come in! I'm super excited haha. Paid about 1450 for the entire exhaust headers to tips. That's a steal
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
Last edited by bionick; 02-05-2015 at 11:35 AM. |
|
|
|
|
|
02-05-2015, 11:34 AM
|
#11 | |
|
|
Quote:
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
|
|
|
|
02-05-2015, 12:33 PM
|
#12 |
|
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
stainless power set up , running it for 12 months, no issues at all
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
|
|
|
|
02-05-2015, 02:04 PM
|
#13 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Only difference in mine is I have SW 2 inch and their s-tube mufflers and it is loud!! ADM said it was the loudest car ever in their shop lol.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
|
|
|
|
02-05-2015, 03:35 PM
|
#14 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
We're running the Full Stainless works headers to tips combo on our shop SS. combined with the cam lope this thing sounds killer. We get tons of compliments on it everywhere we go!
Best regards, Tyler 888-308-6007 |
|
|
|
|
|
|
|
 |
| Tags |
| catless, long tube headers, stainless works, stainless works exhaust |
|
|
