PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS! - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JusticePete · 10-15-2009, 08:45 PM

Quote:

Originally Posted by Roni-K

Hey Doc, His blowing you off on your question isn't he

Not intentionally. What is the question?

Roni-K · 10-15-2009, 08:51 PM

Sorry guys I'm a day late and a dollar short. It was a question that doc asked a month or to ago about a speedo recalebrate, Sorry again Ron

JusticePete · 10-15-2009, 08:56 PM

Quote:

Originally Posted by Roni-K

Sorry guys I'm a day late and a dollar short. It was a question that doc asked a month or to ago about a speedo recalebrate, Sorry again Ron

There is a fractional table in HP Tuners that allows you to adjust the speedometer. We did mine during the dyno tune at back Street Performance in Ohio. They have the dyno calibrated for SCCA which came in handy for getting the speedo right.

Doc · 10-15-2009, 10:12 PM

Quote:

Originally Posted by Roni-K

Sorry guys I'm a day late and a dollar short. It was a question that doc asked a month or to ago about a speedo recalebrate, Sorry again Ron

No, Mike answered it. He said to contact Mike Haddad at Haddad Motorsports which I sent them an email but haven't heard back yet. I also asked about the Xtreme Xa Street package but since it's not available he may have just not responded yet. I'd like to get it all done at the same time if I can.

Rob@WretchedMS · 10-15-2009, 10:22 PM

Quote:

Originally Posted by Doc

No, Mike answered it. He said to contact Mike Haddad at Haddad Motorsports which I sent them an email but haven't heard back yet. I also asked about the Xtreme Xa Street package but since it's not available he may have just not responded yet. I'd like to get it all done at the same time if I can.

Mike Haddad is a great guy, and runs a great shop.
Give him a bit of time to get back to you, or give him a call at his shop.

Haddad Motorsports
423 E. Florence
Inglewood, CA 90301
ttp://www.haddadmotorsports.com/index.html

Ph: O 310.412.8032
F 310.412.8035
mike@haddadmotorsports.com

missionbrent · 10-15-2009, 11:08 PM

Quote:

Originally Posted by JusticePete

You are absolutely correct. The car will be posted will with custom paint, cowl induction hood, chin spoiler, wheels, proCharger, Sweet Thunder custom exhuast, QTP cut outs, Cobalt Friction brakes, American Racing Headers, custom interior, shaved door handles, shaved badges, naked trunk lid and more after we show it at the 28th Street Cruise this Saturday October 29th in Grand Rapids. We hope to see you there.

Where in Michigan are you? Will you have to car anywhere where people from MI can see it any time in the future?

Thanks

Info@PeddersUSA.com · 10-16-2009, 08:32 PM

Quote:

Originally Posted by missionbrent

Where in Michigan are you? Will you have to car anywhere where people from MI can see it any time in the future?

Thanks

PETE IS BY THE GREAT LAKES. HE WAS IN THE NEW HAVEN AREA A COUPLE OF TIMES AND AT THE BERGER CHEV EVENT AS WELL. SO HIS CAMARO HAS BEEN ALL OVER ALREADY. IT IS NOW BEING PREPPED FOR SEMA THEN THE EXCIDE BATTERY INVITATIONAL COMPETITION

MIKE
DMS

Xanthos · 10-16-2009, 09:29 PM

WOAH!

Those maximum lateral G numbers make me JIMP!

Very nice work guys!
- X

JusticePete · 10-16-2009, 09:35 PM

Quote:

Originally Posted by missionbrent

Where in Michigan are you? Will you have to car anywhere where people from MI can see it any time in the future?

Thanks

Saturday, October 17, 2009 at the John Kouw Benefit / Car Show
Olive Engineering
14354 Blair St, Holland, MI
(616) 399-1756 ‎

John builds amazing hot rods at his shop Cruisin Customs, LLC. There has been a serious illness in his family. While he has done all the things responsible people do the situation has taken a toll. This car show is intended to let John know we all care and he is part of a community.

Every car guy in Michigan is welcome to attend. After the show we have a photo shoot on Sunday. Tuesday the Pedders Camaro takes a ride with Reliable and heads out to SEMA. Our Camaro will be back a week to ten days after SEMA. For the winter it will be in the Muskegon / Grand Haven / Holland area. We may drive her down to PRI. Our cars are not show cars. They are drivers for drivers.

JusticePete · 10-16-2009, 09:49 PM

Quote:

Originally Posted by Xanthos

WOAH!

Those maximum lateral G numbers make me JIMP!

Very nice work guys!
- X

We can and will do better with a warmer track and a lot better with full race slicks.

2SSRS@Gen5diy · 10-17-2009, 10:41 AM

Do you think that 20x10.5 in the front will work with a 305/xx/20 as it seems like it will hit the locking nuts in the coilovers.

JusticePete · 10-17-2009, 10:56 AM

Quote:

Originally Posted by 2SSRS

Do you think that 20x10.5 in the front will work with a 305/xx/20 as it seems like it will hit the locking nuts in the coilovers.

With 20s I would suggest 275/25/20 all around on 20x10 rims.

2SSRS@Gen5diy · 10-17-2009, 11:04 AM

That dos not help if you are tiring to run big tires on the car, I like the look of your 305 but not the 19 in the wheel openings, I know i am tiring to have my cake and eat it too, but that is what makes the world go a round.

JusticePete · 10-17-2009, 11:10 AM

Quote:

Originally Posted by 2SSRS

That dos not help if you are tiring to run big tires on the car, I like the look of your 305 but not the 19 in the wheel openings, I know i am tiring to have my cake and eat it too, but that is what makes the world go a round.

The 305/30/20 will fit on the rear with an 11" rim no problem. Up front you should be able to run a 275/35 on a 10.5 and maybe even an 11.

As for the wheel gaps, I NEVER see them when I am pulling 1.38Gs in a turn.

Give Dave Schardt a call over at Forgeline or speak with Rob Anderson our Pedders / Expert Tire expert. If they cannot come up with a fitment for you, no one can.

10-16-2009, 09:29 PM	#120
Xanthos PWA Relapse Drives: Formerly-Stick Join Date: Mar 2008 Location: Oklahoma Posts: 12,588 View My Garage	WOAH! Those maximum lateral G numbers make me JIMP! Very nice work guys! - X __________________ 2017 1LT/RS A8 Hyper Blue Metallic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
Pedders December Dollar Days for the 2010 Camaro and Brand X Vehicles	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	85	07-26-2009 05:20 PM
SEMA, Pedders Conference, GS Camaro, New Products	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	25	12-01-2008 01:25 PM
JP Got Bored or Maybe Lost His Mind	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	0	11-26-2008 04:18 PM
Pedders partnering with GM Racing on Camaro suspension	Info@PeddersUSA.com	Wheels and Tires Talk Sponsored by The Tire Rack	6	09-30-2008 12:14 PM

10-15-2009, 08:51 PM	#114
Roni-K Drives: IOM 2SS/RS LS3 Join Date: Jul 2009 Location: Lafayette Indiana Posts: 27	Sorry guys I'm a day late and a dollar short. It was a question that doc asked a month or to ago about a speedo recalebrate, Sorry again Ron

10-17-2009, 10:41 AM	#123
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Do you think that 20x10.5 in the front will work with a 305/xx/20 as it seems like it will hit the locking nuts in the coilovers.

10-17-2009, 11:04 AM	#125
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	That dos not help if you are tiring to run big tires on the car, I like the look of your 305 but not the 19 in the wheel openings, I know i am tiring to have my cake and eat it too, but that is what makes the world go a round.