PATC TRANNY/PARTS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LSX-80MM · 11-21-2013, 04:14 PM

Thought I may find some feedback on PATC tranny or parts/service here,6l80e or 4l80e,basically is anyone on the board running this product? thanks guys.

Rhino79 · 11-21-2013, 04:56 PM

I run the Phoenix 6l80 kit. Works well. But a 6l80 has to have good tuning especially with a full build.

Supercharged SS · 11-21-2013, 05:07 PM

I've been running a PATC 6l for two years now. Overall it's been good. A few growing pains along the way but it's been getting the job done.

LSX-80MM · 11-22-2013, 02:30 PM

Thanks guys anymore?

JANNETTYRACING · 11-23-2013, 07:54 AM

Quote:

Originally Posted by LSX-80MM

Thanks guys anymore?

We have worked with PATC for Several years Doing Development work here in my shop Some of Our Mods are now part of the Phoenix Package.

We also worked together to develope the tuning to go along with it.

We have several 6L80 High powered cars running this package.

It is Still a work in progress at power levels above 900 RWHP.

If you have any questions feel free to contact me.

Ted.

realcanuk · 11-23-2013, 08:53 AM

Quote:

Originally Posted by LSX-80MM

Thought I may find some feedback on PATC tranny or parts/service here,6l80e or 4l80e,basically is anyone on the board running this product? thanks guys.

I have bought some parts from them and everything went well. Blake there seems to know his stuff pretty well. I see from your sig you are using a built trans now? Any issues with it? I rebuilt my 6L80 with upgrades and its been fine this year. I know it won't last forever and always thinking of what I might try next.

LSX-80MM · 11-23-2013, 10:00 AM

Quote:

Originally Posted by JANNETTYRACING

We have worked with PATC for Several years Doing Development work here in my shop Some of Our Mods are now part of the Phoenix Package.

We also worked together to develope the tuning to go along with it.

We have several 6L80 High powered cars running this package.

It is Still a work in progress at power levels above 900 RWHP.

If you have any questions feel free to contact me.

Ted.

Thanks Ted

LSX-80MM · 11-23-2013, 10:15 AM

Quote:

Originally Posted by realcanuk

I have bought some parts from them and everything went well. Blake there seems to know his stuff pretty well. I see from your sig you are using a built trans now? Any issues with it? I rebuilt my 6L80 with upgrades and its been fine this year. I know it won't last forever and always thinking of what I might try next.

Yea it's a fully built Circle D,but it's been out four times now,burnt clutch's again going back through it,converters sent out to get cut/cleaned,think I'm gonna put it on the shelf till they get there/evolve to hold 1000-1200 hp without worry,I know tuning these things are so critical,in the meantime I'm forced to move forward to a built 4L80e,I've got an LSX build that has been handicapped way too long because of a tranny.

11-21-2013, 04:14 PM	#1
LSX-80MM Ghostly Unknown Drives: Silver Ice 2010 SS/RS A6 Join Date: Oct 2008 Location: Glen St Mary,Fla. Posts: 483	PATC TRANNY/PARTS Thought I may find some feedback on PATC tranny or parts/service here,6l80e or 4l80e,basically is anyone on the board running this product? thanks guys. __________________ TS416,GMPPLSX-LS3 6 Bolt Heads,Custom 80mmComp Turbo,ID850 Injectors, Lonnies Twin Pump Setup,Level 3 4L80E,DSS,3in Magnaflow Exhaust,CoolingMist Meth,RX Dual Catch Can,InnovateWB,Aeroforce Interceptor,AEM Truboost Controller,matte black CF5 Forgestars.700rwhp/712rwtrq

11-22-2013, 02:30 PM	#4
LSX-80MM Ghostly Unknown Drives: Silver Ice 2010 SS/RS A6 Join Date: Oct 2008 Location: Glen St Mary,Fla. Posts: 483	Thanks guys anymore? __________________ TS416,GMPPLSX-LS3 6 Bolt Heads,Custom 80mmComp Turbo,ID850 Injectors, Lonnies Twin Pump Setup,Level 3 4L80E,DSS,3in Magnaflow Exhaust,CoolingMist Meth,RX Dual Catch Can,InnovateWB,Aeroforce Interceptor,AEM Truboost Controller,matte black CF5 Forgestars.700rwhp/712rwtrq

11-21-2013, 04:56 PM	#2
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	I run the Phoenix 6l80 kit. Works well. But a 6l80 has to have good tuning especially with a full build.

11-21-2013, 05:07 PM	#3
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	I've been running a PATC 6l for two years now. Overall it's been good. A few growing pains along the way but it's been getting the job done.