Sinister's Thirst for Power [COTW 10/18/10] - Page 29 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Revo1 · 10-08-2011, 03:00 AM

Quote:

Originally Posted by Shardik2SS

Yeah I guess I will.

Whatever weekend that would be good for everyone. Try to set something up.

Thanks! They are currently at Gary's shop (Extreme Performance). He said he'd try to sell them for me because I wasn't sure if I could find anyone that was interested.

I've got something in the works, but it's a little more distant future

Gonna get with you and J on it soon.

WadeWilson · 10-08-2011, 05:45 AM

Quote:

Originally Posted by Revo1

I've got something in the works, but it's a little more distant future

Gonna get with you and J on it soon.

Sweet!! Shoot me a text or something and let me know.

WadeWilson · 01-17-2012, 09:44 PM

Haven't done anything to the car in a while, but this is what I have planned for this summer.

Aeromotive 18674 Eliminator pump
FTI 2600-2800 TQ converter
Derale 13720 Trans cooler
229/236, .624/.615, 114LSA Cam
Valvetrain Upgrade .675 springs w/ 7.4 pushrods
LS7 Lifters
GM MLS Head Gaskets
GM LS3 Lifter Trays
3-Bolt Cam gear w/ARP bolts LS3 Valley cover & Gasket
LS3 Timing cover & Gasket
ARP Head Studs
OIL, FILTER, DEXCOOL, CLAMPS, FUEL SPARK PLUG
Aeromotive 16306 Pump controler
Whipple 3.75 pulley
Torque Heat Xchanger
Torque IC tank with mounts
PFADT springs
DSS Carbon Fiber DS
DSS axles

To be installed by Cincy Speed.

Dangeruss · 01-17-2012, 09:45 PM

Quote:

Originally Posted by Shardik2SS

Haven't done anything to the car in a while, but this is what I have planned for this summer.

Aeromotive 18674 Eliminator pump
FTI 2600-2800 TQ converter
Derale 13720 Trans cooler
229/236, .624/.615, 114LSA Cam
Valvetrain Upgrade .675 springs w/ 7.4 pushrods LS7 Lifters
GM MLS Head Gaskets
GM LS3 Lifter Trays
3-Bolt Cam gear w/ARP bolts LS3 Valley cover & Gasket LS3 Timing cover & Gasket ARP Head Studs
OIL, FILTER, DEXCOOL, CLAMPS, FUEL SPARK PLUG
Aeromotive 16306 Pump controler
Whipple 3.75 pulley
Torque Heat Xchanger
Torque IC tank with mounts
Custom HP Tuners Tuning
PFADT springs
DSS Carbon Fiber DS
DSS axles

To be installed by Cincy Speed.

Good to see you around again!

WadeWilson · 01-17-2012, 09:53 PM

Quote:

Originally Posted by Dangeruss

Good to see you around again!

Still doesn't stack up to your beast, but it'll be more than enough power for me. Looking forward to seeing you guys at the Fest next year.

Dangeruss · 01-17-2012, 09:54 PM

Quote:

Originally Posted by Shardik2SS

Still doesn't stack up to your beast, but it'll be more than enough power for me. Looking forward to seeing you guys at the Fest next year.

You mean this year right?

WadeWilson · 01-17-2012, 09:55 PM

Quote:

Originally Posted by Dangeruss

You mean this year right?

I'm still stuck in 2011.

acowherd · 01-17-2012, 10:00 PM

Quote:

Originally Posted by Shardik2SS

Haven't done anything to the car in a while, but this is what I have planned for this summer.

Aeromotive 18674 Eliminator pump
FTI 2600-2800 TQ converter
Derale 13720 Trans cooler
229/236, .624/.615, 114LSA Cam
Valvetrain Upgrade .675 springs w/ 7.4 pushrods
LS7 Lifters
GM MLS Head Gaskets
GM LS3 Lifter Trays
3-Bolt Cam gear w/ARP bolts LS3 Valley cover & Gasket
LS3 Timing cover & Gasket
ARP Head Studs
OIL, FILTER, DEXCOOL, CLAMPS, FUEL SPARK PLUG
Aeromotive 16306 Pump controler
Whipple 3.75 pulley
Torque Heat Xchanger
Torque IC tank with mounts
PFADT springs
DSS Carbon Fiber DS
DSS axles

To be installed by Cincy Speed.

Are you going for the Cincy speed long hauler award?

Once I finish my winter build..I'll be hauling mine back out there for a new Cincy speed once over& and new tune.

WadeWilson · 01-17-2012, 10:04 PM

Quote:

Originally Posted by acowherd

Are you going for the Cincy speed long hauler award?

Once I finish my winter build..I'll be hauling mine back out there for a new Cincy speed once over& and new tune.

I should get something for that!

A good friend of mine lived close to Cincy Speed and I'm flying in to go to the Fest with him and a few others. I've heard a lot of good things about Tracy and Craig so I decided to have my car shipped there before the Fest to have some work done.

What are your plans for your winter build?

acowherd · 01-17-2012, 10:13 PM

Quote:

Originally Posted by Shardik2SS

I should get something for that!

A good friend of mine lived close to Cincy Speed and I'm flying in to go to the Fest with him and a few others. I've heard a lot of good things about Tracy and Craig so I decided to have my car shipped there before the Fest to have some work done.

What are your plans for your winter build?

Yes..I have enjoyed/enjoy working with them in person and technical help over the phone/email/facebook. Craig/Tracy make themselves avaliable to thier customers.

Putting in the RPM 4L80e, alky control, pully down to up the boost(10-11 psi). Looking for another 50-75 rwhp...put this pig in 10s

WadeWilson · 01-17-2012, 10:20 PM

Quote:

Originally Posted by acowherd

Yes..I have enjoyed/enjoy working with them in person and technical help over the phone/email/facebook. Craig/Tracy make themselves avaliable to thier customers.

Putting in the RPM 4L80e, alky control, pully down to up the boost(10-11 psi). Looking for another 50-75 rwhp...put this pig in 10s

That's what I've heard and it's good to know.

That sounds sweet! Let me know your thoughts on the 4L80. I'll probably need to go that route soon. I'm hoping to have the cash next year to do that and a Stroker build. I would think you're close to 10s now with your setup and definitely hit them after your winter build.

acowherd · 01-17-2012, 11:24 PM

Quote:

Originally Posted by Shardik2SS

That's what I've heard and it's good to know.

That sounds sweet! Let me know your thoughts on the 4L80. I'll probably need to go that route soon. I'm hoping to have the cash next year to do that and a Stroker build. I would think you're close to 10s now with your setup and definitely hit them after your winter build.

I know I got alot of work to do!! Some of the guys around here make 10s seem easy, and seem to have endless budgets.

I follow along on your build!

Dangeruss · 01-17-2012, 11:48 PM

Quote:

Originally Posted by Shardik2SS

That's what I've heard and it's good to know.

That sounds sweet! Let me know your thoughts on the 4L80. I'll probably need to go that route soon. I'm hoping to have the cash next year to do that and a Stroker build. I would think you're close to 10s now with your setup and definitely hit them after your winter build.

Love my 4L80..you gotta do this!

WadeWilson · 01-18-2012, 07:39 AM

Quote:

Originally Posted by acowherd

I know I got alot of work to do!! Some of the guys around here make 10s seem easy, and seem to have endless budgets.

I follow along on your build!

I agree bud. I'll definitely be following yours as well.

Quote:

Originally Posted by Dangeruss

Love my 4L80..you gotta do this!

Can't right now due to the cost of it, but I'm definitely considering it when I do my next round of upgrades.

01-17-2012, 09:44 PM	#395
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,156 View My Garage	Haven't done anything to the car in a while, but this is what I have planned for this summer. Aeromotive 18674 Eliminator pump FTI 2600-2800 TQ converter Derale 13720 Trans cooler 229/236, .624/.615, 114LSA Cam Valvetrain Upgrade .675 springs w/ 7.4 pushrods LS7 Lifters GM MLS Head Gaskets GM LS3 Lifter Trays 3-Bolt Cam gear w/ARP bolts LS3 Valley cover & Gasket LS3 Timing cover & Gasket ARP Head Studs OIL, FILTER, DEXCOOL, CLAMPS, FUEL SPARK PLUG Aeromotive 16306 Pump controler Whipple 3.75 pulley Torque Heat Xchanger Torque IC tank with mounts PFADT springs DSS Carbon Fiber DS DSS axles To be installed by Cincy Speed.