10-04-2013, 06:07 PM | #1 |
Drives: 2013 Cammed/LSA Conversion 1LE Join Date: Mar 2013
Location: Corbin, Ky
Posts: 564
|
Defenderworx A6 Shifter Install Question.
So I just bought a Defenderworx Shifter for my 2012 A6, and I can't seem to get it on there right. I got it put on,and it will let you shift in to gear without holding the brake in? and I took the inner part off and put it on first and noticed that there wasn't a spring? is it suppose to have one? can't figure this out! please help.
__________________
"Livin' life in the fast lane, moving at the speed of light and I can't slow down, only got a gallon in the gas tank, but I'm at the finish line so I can't stop now"
Last edited by AustinWithrow; 10-04-2013 at 06:49 PM. |
10-04-2013, 07:02 PM | #2 |
Drives: 15 SS 2SS RS 1LE Red Rock Metallic Join Date: Aug 2013
Location: South East
Posts: 72
|
According to the instructions there is a spring.
4. Slide the lower half of the DefenderWorx shifter (the inner shifter) over the pointed stem, inserting the hole along the bottom panel of the shifter and tighten the two set screws (do not over tighten the screws). 5. Take the spring out of the upper part of the DefenderWorx shifter (the pistol grip part) and place the spring over the pointed stem that is sticking out of the lower half of the DefenderWorx shifter (the inner shifter). 6. Place the upper part of DefenderWorx shifter (the pistol grip part) over the spring and inner shifter. 7. Push the upper part of the DefenderWorx shifter all the way down so it is sitting straight and flush against the inner shifter and tighten the set screw (do not over tighten).
__________________
2015 SS RS 2SS 1LE
Red Rock Metallic |
10-04-2013, 07:10 PM | #3 | |
Drives: 2013 Cammed/LSA Conversion 1LE Join Date: Mar 2013
Location: Corbin, Ky
Posts: 564
|
Quote:
I looked at the instructions and saw that... but I never got one with my shifter? I wonder what size spring it takes? thanks for the info.
__________________
"Livin' life in the fast lane, moving at the speed of light and I can't slow down, only got a gallon in the gas tank, but I'm at the finish line so I can't stop now"
|
|
10-04-2013, 07:46 PM | #4 |
Drives: 2010 rs 2lt Join Date: Aug 2012
Location: wisconsin
Posts: 2,497
|
Well I am going to Install a hurst shifter this weekend , Now you got me nervous ,
|
10-04-2013, 08:48 PM | #5 |
Drives: 2013 Cammed/LSA Conversion 1LE Join Date: Mar 2013
Location: Corbin, Ky
Posts: 564
|
I might just be stupid. but it will let me put it in gear without holding the brake. so I took it back off til I can figure it out.
__________________
"Livin' life in the fast lane, moving at the speed of light and I can't slow down, only got a gallon in the gas tank, but I'm at the finish line so I can't stop now"
|
10-07-2013, 12:42 PM | #6 |
Drives: 2013 Cammed/LSA Conversion 1LE Join Date: Mar 2013
Location: Corbin, Ky
Posts: 564
|
bump?
__________________
"Livin' life in the fast lane, moving at the speed of light and I can't slow down, only got a gallon in the gas tank, but I'm at the finish line so I can't stop now"
|
10-08-2013, 09:04 AM | #7 |
Car Lover By Nature
Drives: 2016 Hyper Blue Metallic SS Join Date: Dec 2009
Location: Central FL
Posts: 2,327
|
I'm getting the same shifter very soon. I hope I don't have any install issues.
__________________
|
10-11-2013, 03:55 PM | #8 |
Car Lover By Nature
Drives: 2016 Hyper Blue Metallic SS Join Date: Dec 2009
Location: Central FL
Posts: 2,327
|
we installed mine today but of course there were some installation issues. you can see and read all the details in my thread below.
http://www.camaro5.com/forums/showthread.php?t=322671
__________________
|
|
|
|
|