Considering adding a rocker panel stripe. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OHIOSS · 08-09-2012, 10:09 PM

I am thinking about buying a Camaro Rocker Panel Side Accent Stripes decal kit but haven't seen but 2 cars that have these stripes on them. Is there anyone on the forum that has pics of these stripes. This is one I could find online but I am hoping to see what they look like on a black SS.

Russ

ihaveacamaro · 08-09-2012, 10:24 PM

One guy with victory red did his in plastidip. Looked great, but can't remember his username.

bigwormgraphix · 08-09-2012, 11:46 PM

We have the lower accent stripes above available, they are $74.95
http://www.bigwormgraphix.net/images/camaro/cam5-blk-red-lower-stripes-lrg.jpg

OHIOSS · 08-10-2012, 03:55 PM

I like the way the stripe looks, is there a specific area it should be installed? The ones I've seen are not in the same location as your pic is showing. Curious where a start point would be when installing.

Russ

bigwormgraphix · 08-10-2012, 04:10 PM

They follow the body lines of the car, top & bottom. They are also pre-cut for the door opening & we leave enough material to wrap around the edges.

bigwormgraphix · 08-10-2012, 04:12 PM

The picture below shows a close up view of where they start & stop.

Cal's bee · 08-10-2012, 04:38 PM

did mine and it was very easy.

OHIOSS · 08-10-2012, 08:21 PM

Thanks for the info Big Worm. Do you make these in 3M gold metallic?

Cals- Your's look great on the car. How did you keep the stripes straight? Did you put marks on the car by measuring from the bottom up?

Russ

Cal's bee · 08-10-2012, 09:14 PM

Just followed the lines of the rocker panel and blue taded them in place. Then applied.

bigwormgraphix · 08-10-2012, 09:55 PM

Quote:

Originally Posted by OHIOSS

Thanks for the info Big Worm. Do you make these in 3M gold metallic?

Cals- Your's look great on the car. How did you keep the stripes straight? Did you put marks on the car by measuring from the bottom up?

Russ

We have a gold available, we use Hexis vinyl instead of 3M (it's more durable, easier to install & lasts longer).

08-09-2012, 10:09 PM	#1
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 1,699	Considering adding a rocker panel stripe. I am thinking about buying a Camaro Rocker Panel Side Accent Stripes decal kit but haven't seen but 2 cars that have these stripes on them. Is there anyone on the forum that has pics of these stripes. This is one I could find online but I am hoping to see what they look like on a black SS. Russ Attached Images

08-09-2012, 10:24 PM	#2
ihaveacamaro Future Dentist in 4 yrs! Drives: #198 Join Date: Oct 2009 Location: Gainesville, Florida (UF) Posts: 4,056	One guy with victory red did his in plastidip. Looked great, but can't remember his username. __________________ Mods: Lambo Doors, Hex Vents and GM High Wing Spoiler Both Painted Summit White Custom White NS-1 Stripes SS Exhaust, Injen Intake White RS Wheels, White Trunk Bezels ABM Painted Brake Calipers, ABM/White Painted Engine Cover Dash Ambient Lighting Extension, Rear-View Camera, RX Catch Can Chevy Emblem Vinyl Overlays, Dye Stitching AAC: Amber (Orange) Headlight And Fog Halos Installed As DRLs ABL Footwells x 4, ABL Dome And Trunk Light Afterburners, Reverse LEDs, Illuminated Rear Bowtie (Amber/Orange)

08-09-2012, 11:46 PM	#3
bigwormgraphix Drives: 1985 IROC-Z & 1980 Trans Am Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 513	We have the lower accent stripes above available, they are $74.95 http://www.bigwormgraphix.net/images/camaro/cam5-blk-red-lower-stripes-lrg.jpg __________________ http://www.bigwormgraphix.net/camaro5.htm

08-10-2012, 04:10 PM	#5
bigwormgraphix Drives: 1985 IROC-Z & 1980 Trans Am Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 513	They follow the body lines of the car, top & bottom. They are also pre-cut for the door opening & we leave enough material to wrap around the edges. __________________ http://www.bigwormgraphix.net/camaro5.htm

08-10-2012, 04:12 PM	#6
bigwormgraphix Drives: 1985 IROC-Z & 1980 Trans Am Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 513	The picture below shows a close up view of where they start & stop. __________________ http://www.bigwormgraphix.net/camaro5.htm

08-10-2012, 03:55 PM	#4
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 1,699	I like the way the stripe looks, is there a specific area it should be installed? The ones I've seen are not in the same location as your pic is showing. Curious where a start point would be when installing. Russ

08-10-2012, 04:38 PM	#7
Cal's bee Drives: 2010 Camaro 2LT Join Date: Mar 2011 Location: Chandler, Texas Posts: 219 View My Garage	did mine and it was very easy. Attached Images

08-10-2012, 08:21 PM	#8
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 1,699	Thanks for the info Big Worm. Do you make these in 3M gold metallic? Cals- Your's look great on the car. How did you keep the stripes straight? Did you put marks on the car by measuring from the bottom up? Russ

08-10-2012, 09:14 PM	#9
Cal's bee Drives: 2010 Camaro 2LT Join Date: Mar 2011 Location: Chandler, Texas Posts: 219 View My Garage	Just followed the lines of the rocker panel and blue taded them in place. Then applied.