08-29-2014, 10:36 AM | #1 |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
2013 v6 to 2010 Brembo
I bought a set of 2010 Brembo calipers from a member here and I was wondering if they'll fit my 2013? I know I need new brake lines and need to cut or replace the rear heat shield, but besides that it should be ok right?
|
08-29-2014, 12:53 PM | #2 |
[COTW 4/13/15]
Drives: Supercharged LLT Join Date: Jul 2010
Location: Florida
Posts: 5,957
|
They will bolt on just fine and will be a upgrade for sure. You need the correct Caliper bolts and the front and rear pin kit. I would recommend the Goodridge SS lines, Motul BF, and a good cutting tool for the dust shields...
__________________
|
08-29-2014, 02:20 PM | #3 |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
I thought so. I'm probably gonna go with the goodridge lines. Where do I get the bolts and pin kit?
|
08-30-2014, 11:12 AM | #4 | |
[COTW 4/13/15]
Drives: Supercharged LLT Join Date: Jul 2010
Location: Florida
Posts: 5,957
|
Quote:
rear pin kit- http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1 Front - http://www.amazon.com/ACDelco-18K197...rb_top?ie=UTF8 I'll look and see where the caliper bolt # is but im sure Maureen knows what it is too.
__________________
|
|
08-30-2014, 11:38 AM | #5 |
[COTW 4/13/15]
Drives: Supercharged LLT Join Date: Jul 2010
Location: Florida
Posts: 5,957
|
Just want to hit home that getting this tool http://www.harborfreight.com/power-t...ool-67537.html
Would make your life so much easier for the dust shields.
__________________
|
08-30-2014, 02:08 PM | #6 | |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
Quote:
|
|
|
|
|
|