07-02-2015, 05:12 PM | #1 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Engines by JPSS
JPSS is a full service organization with locations in Martinsville, VA and Concord, NC. You know that JPSS knows suspension. You may not know that JPSS knows Engines.
When we moved to NASCAR Country we made new friends. Joey Arrington has been building Championship NASCAR motors for almost 40 years. His shop is in the old Gillette Evernham Racing facility in Concord, NC minutes away from the Charlotte Motor Speedway. They build GM, Toyota and Ford race motors. JPSS motors are built by Joey alongside NASCAR Cup motors by the same Master Engine Builders. They are tuned on the same NASCAR engine dynos as the Cup motors by the same tuners. We cut no corners. We do it one way and only one way. Living and working down the street from the Martinsville Half Mile of Mayhem Speedway and the Charlotte Speedway, it should come as no surprise that JPSS engine builders and bring years of NASCAR level skill to your build. Some will read this and think they cannot afford to work with JPSS. We see it differently. Look around the forums and internet. You'll see project after project that has gone wrong and being rebuilt for the second and third time. JPSS stands behind our clients and our work. Working with JPSS isn't more expensive. Working with JPSS saves you money. JP Superior Solutions is our suspension company. JP Speed Shop builds motors, tunes them and builds cars from conception to design to completion. JP Superior Service handles maintenance, alignments and aftermarket parts installation. We are not new to this business. Only our name is new. We want your build. JPSS conceives, engineers and manufactures the highest quality components to meet the needs of automotive enthusiasts. Every component is tested and proven to meet the obsessive standards of the most demanding people we know, our clients. The JPSS difference goes beyond the quality of our components. It is an experience. We are committed to listening to our clients and guiding them through the decision process to deliver a solution that exceeds their expectations. Our interest is not making a single sale. Our interest is in building relationships that last a lifetime. When JPSS begins new product evaluations we analyze it through the eyes of the factory engineers. We ask a lot of what if questions. What if curb clearance wasn't a consideration? What if the RWHP was increased by 50%? 100% What if this part were made only for the enthusiast that wanted only the best? What are the best attributes of the original equipment part? What are the weaknesses? What can we do to make it better? Will it be the best of the best available? When you purchase a JPSS component, you can be confident it will fit like an original equipment part. It will be more robust than the part it replaces. JPSS components are designed to deliver years of service to the most demanding drivers. Our warranty is straightforward. If it breaks, we’ll replace it. If it wears out, we have a rebuild program. If you are unhappy, we will find a way to make you smile. JPSS products will perform as described, meet and exceed your expectations. If for any reason you are not completely satisfied with a JPSS part, return it for a full refund. Our dynos are like our engine work -- Dead Nuts Balls On Accurate. When you really want to know how much power you make, bring it to JPSS. When you want an engine built to last on track, talk to JPSS. Call and ask for Joey or Pete (276) 644-0100 |
07-02-2015, 06:05 PM | #2 |
Drives: 2014 2SS M6 "CHRISTINE" Join Date: Mar 2014
Location: Boston Metro North
Posts: 2,916
|
This is pornographic OMFG!!!!! Some day man, wowza!
__________________
"But, House Mormont remembers. The North remembers! We know no King but the King of the North whose name is Stark. I don't care if he's a bastard. Ned Stark's blood runs through his veins. He's my king–from this day until his last day."
Mods: ARH headers and hi flow cats, VMAX ported throttle body, CAI air intake, Slowhawk Performance tuning |
07-02-2015, 06:09 PM | #3 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-02-2015, 06:10 PM | #4 |
Drives: 2010 SS L99 IOM Join Date: Aug 2012
Location: CA
Posts: 1,927
|
Nice intro to the engine building side. Next milestone is to come out West.
__________________
369rwhp/392rwtq
"Spending money I don't have, to buy parts I don't need, to impress people I don't know!" -Jenkins |
07-02-2015, 06:18 PM | #5 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-02-2015, 07:32 PM | #6 |
|
Arrington builds some big steam!!! When did you merge in business? Are the installs done here in NC or up by you?
__________________
|
07-02-2015, 07:38 PM | #7 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Installs are done in Martinsville, VA. Engines are built in Concord, NC. Joey and I got to know each other over the last year or so. Race Engines Plus (Concord, NC) is all Joey and his NASCAR business. JPSS and Joey are partners in the retail engine business. Funny how the Justice Pete thing worked out to become Joey and Pete building engines
|
07-05-2015, 09:00 AM | #8 |
Drives: 2011 Black 2SS Join Date: Dec 2010
Location: Concord, NC
Posts: 33
|
Used to work in that shop, its got it all
|
07-05-2015, 09:27 PM | #9 |
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
Welcome back Buddy! Great to have you here again and looking forward to the future products.
Ivan @ Southwest Speed |
07-05-2015, 10:49 PM | #10 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-06-2015, 05:55 PM | #11 |
Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010
Location: Global Citizen
Posts: 1,243
|
I volunteer to be the first for an introductory steal of a deal on a 416 forged motor.
__________________
Meh
|
|
|
Thread Tools | |
|
|