ADM PERFORMANCE Wireless Exhaust Valve Control thread - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

babigguy · 06-12-2013, 05:52 PM

Quote:

Originally Posted by ADM PERFORMANCE

Unfortunately no.

It's open all the time at idle anyway from the factory.

I'm still not sure why you would want it open all the time anyway?

Please explain?

Closed for quiet, stock, and open like the fuse pull

ADM PERFORMANCE · 06-12-2013, 08:10 PM

Quote:

Originally Posted by hognutz

Hey Andy did you sell all of the first ten kits?

We have 2 left at this price.

zfuzz · 06-13-2013, 09:11 AM

Quote:

Originally Posted by Stephen12ZL1

"closed" or "stock" operation for this ADM unit which is unlike anything on the market. Mild to wild can only go to "open" or "stock"

ADM = closed or stock

Mild to Wild = open or stock

How is the ADM unit controlled ???

Stephen12ZL1 · 06-13-2013, 10:51 AM

see above...wireless remote "Here is were we would like those who ordered our first batch of exhaust controllers to post about the new Wireless ADM Exhaust Valve controller for ZL1 AND ALL FACTORY EQUIPPED NPP CAMAROS."

tsnow · 06-13-2013, 03:07 PM

Controlled by a stand alone wireless remote.

Got mine coming

.

ADM PERFORMANCE · 06-13-2013, 05:30 PM

Quote:

Originally Posted by tsnow

Controlled by a stand alone wireless remote.

Got mine coming

.

We sold the last one to TSNOW.

Stephen12ZL1 · 06-14-2013, 02:01 PM

just received mine from UPS...haven't had a chance to install yet. It looks great. Top notch as usual and very well made. Looks to be true "plug & play" as advertised. Going to the track tonight. Will install this weekend.

Drew P · 06-14-2013, 04:25 PM

Just finished install - no issues with install. Having an issue though - when the remote is pressed, the valves close as intended. However, after about 5 - 10 seconds they re-open on their own. After waiting about 20 seconds after this occurs, I am able to press the remote and close the valves again, but they pop open again after the 5 - 10 seconds. Talked to ADM and they are looking into the issue. Anyone else experience same?

PS - I found it easier to re-attach the harness to the solenoid (right above muffler) by removing the one bolt that holds the plastic shroud around the solenoid. Once removed, you can rotate the solenoid towards the ground and clip the harness in much easier.

DuskSS · 06-14-2013, 04:53 PM

Quote:

Originally Posted by babigguy

Any chance of this being closed,stock,and open?? And can you pm me a price?

This AND I would pay up to 200 bucks for a device that had all 3 modes.

DuskSS · 06-14-2013, 04:56 PM

Quote:

Originally Posted by ADM PERFORMANCE

Unfortunately no.

It's open all the time at idle anyway from the factory.

I'm still not sure why you would want it open all the time anyway?

Please explain?

What do you mean you don't understand why we want it open all the time?

Factory is only good for cruising on the highway other than that is 100% worthless.

Closed would be great for creeping around or date night when you just want minimal noise.

and OPEN for the rest of the time.

my M2W only goes into quiet for road trips the rest of the time it is worthless in factory mode now that the car is heavily modded.

ADM PERFORMANCE · 06-14-2013, 06:31 PM

Quote:

Originally Posted by Drew P

Just finished install - no issues with install. Having an issue though - when the remote is pressed, the valves close as intended. However, after about 5 - 10 seconds they re-open on their own. After waiting about 20 seconds after this occurs, I am able to press the remote and close the valves again, but they pop open again after the 5 - 10 seconds. Talked to ADM and they are looking into the issue. Anyone else experience same?

PS - I found it easier to re-attach the harness to the solenoid (right above muffler) by removing the one bolt that holds the plastic shroud around the solenoid. Once removed, you can rotate the solenoid towards the ground and clip the harness in much easier.

We will be looking into this more after the fathersday weekend.Drews situation is a bit confusing as we teted each one on the bench prior to shipping.

Either way we will be on top of this with answeres monday.

Thanks
Andy

PS I WILL BE AVAILABLE VIA PHONE OVER THE WEEKEND IF ANYBODY HAS QUESTIONS,IF YOU GET VOICEMAIL PLEASE LEAVE A MESSAGE AND I WILL RETURN YOUR CALL

Drew P · 06-14-2013, 07:07 PM

Just as a side-note, I called ADM about the issue I was having and Andy called me back within an hour and discussed with me. Great customer service. Very impressed.

DrkPhx · 06-14-2013, 08:17 PM

Just installed mine and I love it. No issues and it works fine. I timed it closed and shut 30-40 seconds at a time and it held in each mode without a problem. I also left it closed with the engine shut off for 5 minutes, started it up and it was still closed.

A true plug n play mod that is well worth it for those will LT's. I have the Kooks 1-7/8' with green HF cats and initial cold start is loud; but this mod quiets it down significantly but still has a nice growl. Nice job ADM!

Stephen12ZL1 · 06-15-2013, 08:56 AM

Fits great...works great. Maybe 15min install. One tip...make sure you add the fuse from the flapper location from the fuse box to the supplied holder so there will be 2 10amp fuses stacked.

06-13-2013, 10:51 AM	#18
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	see above...wireless remote "Here is were we would like those who ordered our first batch of exhaust controllers to post about the new Wireless ADM Exhaust Valve controller for ZL1 AND ALL FACTORY EQUIPPED NPP CAMAROS." __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

06-13-2013, 03:07 PM	#19
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 249	Controlled by a stand alone wireless remote. Got mine coming.

06-14-2013, 02:01 PM	#21
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	just received mine from UPS...haven't had a chance to install yet. It looks great. Top notch as usual and very well made. Looks to be true "plug & play" as advertised. Going to the track tonight. Will install this weekend. __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

06-15-2013, 08:56 AM	#28
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	Fits great...works great. Maybe 15min install. One tip...make sure you add the fuse from the flapper location from the fuse box to the supplied holder so there will be 2 10amp fuses stacked. __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

06-14-2013, 04:25 PM	#22
Drew P Drives: Camaro ZL1 Join Date: May 2012 Location: Houston Posts: 233	Just finished install - no issues with install. Having an issue though - when the remote is pressed, the valves close as intended. However, after about 5 - 10 seconds they re-open on their own. After waiting about 20 seconds after this occurs, I am able to press the remote and close the valves again, but they pop open again after the 5 - 10 seconds. Talked to ADM and they are looking into the issue. Anyone else experience same? PS - I found it easier to re-attach the harness to the solenoid (right above muffler) by removing the one bolt that holds the plastic shroud around the solenoid. Once removed, you can rotate the solenoid towards the ground and clip the harness in much easier.

06-14-2013, 07:07 PM	#26
Drew P Drives: Camaro ZL1 Join Date: May 2012 Location: Houston Posts: 233	Just as a side-note, I called ADM about the issue I was having and Andy called me back within an hour and discussed with me. Great customer service. Very impressed.

06-14-2013, 08:17 PM	#27
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	Just installed mine and I love it. No issues and it works fine. I timed it closed and shut 30-40 seconds at a time and it held in each mode without a problem. I also left it closed with the engine shut off for 5 minutes, started it up and it was still closed. A true plug n play mod that is well worth it for those will LT's. I have the Kooks 1-7/8' with green HF cats and initial cold start is loud; but this mod quiets it down significantly but still has a nice growl. Nice job ADM!