onebad 1LE MODS - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

onebad1le · 01-31-2013, 09:01 PM

installed some speakers and painted rims black---but had a problem
on a 1LE a 305/40/18 will not work with the stock front tires 285/35/20--all
the check engine light came on, so I had too sell the rims and tires. I bought 2008 C6 TWIN spokes with 305 /35/19 mickey thompson
are the exact same tire diameter as the front so no lights.

onebad1le · 01-31-2013, 09:10 PM

Amp install with ******** harness and paint rims black also CNC heads

mcsoul · 01-31-2013, 09:21 PM

Is your new drive shaft lighter than the original? If so do you
know by how much?

onebad1le · 01-31-2013, 09:49 PM

honestly u can look at drive shop web site and find out --i dont know

Bad@ssCamaro · 01-31-2013, 10:13 PM

Quote:

Originally Posted by onebad1le

honestly u can look at drive shop web site and find out --i dont know

Yes, the one piece drive shaft you put in last month. Is there a particular reason you went with the 3.5 dia. instead of the 3" dia?

onebad1le · 01-31-2013, 10:39 PM

i got the drive shaft cheap along with the wheels

Bad@ssCamaro · 01-31-2013, 10:45 PM

Quote:

Originally Posted by onebad1le

i got the drive shaft cheap along with the wheels

Awesome

that means more money for other goodies

tramtwo · 02-01-2013, 12:37 AM

Lookin good... can't wait to hear it!

tramtwo posted this on the go

onebad1le · 02-04-2013, 07:08 PM

well look what just came in the mail....GM cnc LS3 ported heads

onebad1le · 02-04-2013, 07:16 PM

i painted my C6 twin spoke rims and ordered my 305/35/19 mickey thompson
drag radials

stryker755 · 02-09-2013, 02:31 PM

Gonna run 10s N/A?

onebad1le · 02-09-2013, 07:32 PM

I wanna run fast-- just dont know how fast all motor ? next is a fast intake manifold and if not 10s -- I might put a blower (small boost) stock bottom end on and maybe a small shot of nitrous.
Then if still not in 10s a built block and big boost.

blake2010ss · 02-09-2013, 07:51 PM

I would just do a ported ls3 manifold.. i wouldnt waste with a fast unless you go bigger cubes.

Muscle SS · 02-18-2013, 11:06 AM

What's with the header exhaust leak thread?

01-31-2013, 09:01 PM	#15
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	and more mods installed some speakers and painted rims black---but had a problem on a 1LE a 305/40/18 will not work with the stock front tires 285/35/20--all the check engine light came on, so I had too sell the rims and tires. I bought 2008 C6 TWIN spokes with 305 /35/19 mickey thompson are the exact same tire diameter as the front so no lights. Attached Images

01-31-2013, 09:10 PM	#16
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	NEXT MODS Amp install with ******** harness and paint rims black also CNC heads Attached Images

01-31-2013, 09:49 PM	#18
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	drive shaft ? honestly u can look at drive shop web site and find out --i dont know

01-31-2013, 10:39 PM	#20
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	drive shaft ? i got the drive shaft cheap along with the wheels

02-04-2013, 07:08 PM	#23
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	more mods well look what just came in the mail....GM cnc LS3 ported heads Attached Images Last edited by onebad1le; 02-09-2013 at 07:42 PM.

01-31-2013, 09:21 PM	#17
mcsoul Drives: Want a gen 6 Join Date: Jan 2013 Location: 75089 Posts: 1,032	Is your new drive shaft lighter than the original? If so do you know by how much?

02-01-2013, 12:37 AM	#22
tramtwo Drives: 2021 1LE Join Date: Jul 2011 Location: N'Awlinz Posts: 6,315	Lookin good... can't wait to hear it! tramtwo posted this on the go

02-04-2013, 07:16 PM	#24
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	painted rims i painted my C6 twin spoke rims and ordered my 305/35/19 mickey thompson drag radials Attached Images

02-09-2013, 02:31 PM	#25
stryker755 Drives: 2013 ZL1 Vert AGM Join Date: Apr 2009 Location: Michigan Posts: 319	Gonna run 10s N/A? __________________ Camaros Owned: -2013 ZL1 Vert A6 Ashen Gray 700HP (Current) -1986 Z28 Blueprint 383 Stroker 430HP (Current) -2010 2SS/RS Silver Ice M6 TVS2300 700HP (SOLD) -2010 2SS Aqua Blue M6 Stock (SOLD) -1986 Sport Coupe Gray Built 355 (SOLD)

02-09-2013, 07:32 PM	#26
onebad1le Account Suspended Drives: 2013 1le Join Date: Nov 2012 Location: houston Posts: 459	10 s ? I wanna run fast-- just dont know how fast all motor ? next is a fast intake manifold and if not 10s -- I might put a blower (small boost) stock bottom end on and maybe a small shot of nitrous. Then if still not in 10s a built block and big boost. Last edited by onebad1le; 02-09-2013 at 07:44 PM.

02-09-2013, 07:51 PM	#27
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	I would just do a ported ls3 manifold.. i wouldnt waste with a fast unless you go bigger cubes. __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

02-18-2013, 11:06 AM	#28
Muscle SS All blackkk Drives: 2010 2SS/RS LS3 Join Date: Oct 2011 Location: Albany, NY Posts: 871	What's with the header exhaust leak thread? __________________ Drivin it like I stole it.