04-30-2012, 09:02 AM | #15 |
|
universal XM tuner? Why is that? isnt XM basically XM? sorry for maybe the obvious questions but i dont understand why they would not be compatable
|
04-30-2012, 10:46 AM | #16 |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
Ok so the XM tuner is built into the factory radio, so when you replace the factry radio, you no longer have an XM tuner. Each brand of naviagation unit, Pioneer, Alpine, Clarion, Kenwood, etc. has their own XM tuner that connects to the head unit. In my case i had to purchase the pioneer GEX-P920XM (thats the part # for their tuner). This connects to the navagation unit and allows me to have XM radio again. Once i installed it, i just called XM/Sirus and they transfered the service from my old to the new tuner. Make sure you have the radio ID when you call them. Its on the radio or can be found if you tune to channel 000 on the radio i believe.
__________________
_____________________________________________
2SS/RS, Cyber Gray Metalic, Black Interior Order date- Don't Remember! 2000, Order accepted by GM 10/13/2009 2500, Order preferenced 10/14/2009 3000, Order accepted by production control 10/19/2009 TPW 11/02/2009 3100, Order available to sequence 3300, Order scheduled for production 10/23/2009 3400, Order broadcast 10/30/2009 3800, Order produced 10/31/2009 got my Vin #62932 on 11/04/2009 4200, Shipped 11/4/2009 - Railroad rail number ETTX852716 |
04-30-2012, 12:28 PM | #17 | |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
Quote:
|
|
04-30-2012, 12:55 PM | #18 |
Car Enthusiast
Drives: 2010 Rally Yellow Camaro 2SS A/T Join Date: Dec 2010
Location: Keller, Texas
Posts: 760
|
the latest firmware would be IO:50 SW:68 confirmed by Tony from Scosche tch support
__________________
2010 Rally Yellow 2SS/RS
Performance Upgrades: Custom Flowmaster X system Exhaust Audio Upgrades: Too much to write down. Visit http://www.camaro5.com/forums/showthread.php?t=206016 |
04-30-2012, 03:19 PM | #19 |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
|
04-30-2012, 06:05 PM | #20 |
Drives: 2011 2SS/RS Black A6 Join Date: Oct 2011
Location: Charleston, South Carolina
Posts: 50
|
Was wondering if the Z140 has a detachable face plate or not?
|
04-30-2012, 08:41 PM | #21 |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
No detachable face plate on the Pioneer z140bh
Last edited by LewisB22; 04-30-2012 at 08:42 PM. Reason: correct my bad spelling |
05-06-2012, 09:00 AM | #22 |
Wicked ZL1
|
How do you update the firmware on the Scosche? After the install, what steering buttons do not work?
__________________
2017 Hyper Blue Metallic ZL1 A10/CF Hood Insert/PDR/NAV MODS: Rotofab CAI/V-MAX CNC Ported Throttle Body/Clear Bra/LED Reverse Light/Rock Guards/Lift Pads/Darkened Tail Lights/Ghost-Tinted LED Side Markers/Darkened 3rd Brake Light
|
05-07-2012, 09:25 AM | #23 |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
Just to let everyone know, i have one reoccurring issue.
The Steering Wheel Controls. When i first installed, they worked, then one day they stopped working. I talked to scosche and they recommanded reseting the scosche pannel. That required removing the two connectors to it and waiting in the car for 7-10 minutes for the car to go to sleep and then reconnecting the cables. I did this and the controls started working fine again. They worked for a week or so and now they dont work again. I contacted Scosche and they recommand either trying the reset again or sending the unit back for warrenty. I am going to reset them one more time and if they fail again, i will be sending the unit back to them. For those of you that dont do the install youself, having to reset the unit would require a trip back to your installer, because you must remove the scosche dash kit to get to the connectors to disconnect and re connect. I'll let you know of any progress on this issue.
__________________
_____________________________________________
2SS/RS, Cyber Gray Metalic, Black Interior Order date- Don't Remember! 2000, Order accepted by GM 10/13/2009 2500, Order preferenced 10/14/2009 3000, Order accepted by production control 10/19/2009 TPW 11/02/2009 3100, Order available to sequence 3300, Order scheduled for production 10/23/2009 3400, Order broadcast 10/30/2009 3800, Order produced 10/31/2009 got my Vin #62932 on 11/04/2009 4200, Shipped 11/4/2009 - Railroad rail number ETTX852716 |
05-07-2012, 03:58 PM | #24 |
|
Good info thx, I've got my deck and scotche comming should be here at the end of the week. It will be with the z140bh as well
|
05-07-2012, 04:07 PM | #25 |
Drives: 2010 Camaro, 1968 Camaro Join Date: Apr 2012
Location: Norton, VA
Posts: 333
|
Yes, LewisB22 gave you good information there. The tuner is typically not located inside the factory stereo in the vehicle, but it can't be reused once the factory head unit is taken out because it doesn't feature a connection that will plug into a new head unit. This has been resolved in some GM vehicles with a new adapter that is available, but doesn't work on the Camaro. Each aftermarket head unit will only recognize a specific satellite tuner in terms of a connection and controlling it. Just like the Pioneer that Lewis mentioned.
|
05-08-2012, 08:01 PM | #26 |
Drives: 1995 Mitsubishi 3000GT/2010 Camaro Join Date: Sep 2009
Location: Dallas, GA
Posts: 88
|
Ok so i took the scosche kit off and reset it once more. Steering wheel controls work once again. i will see how long that lasts.
__________________
_____________________________________________
2SS/RS, Cyber Gray Metalic, Black Interior Order date- Don't Remember! 2000, Order accepted by GM 10/13/2009 2500, Order preferenced 10/14/2009 3000, Order accepted by production control 10/19/2009 TPW 11/02/2009 3100, Order available to sequence 3300, Order scheduled for production 10/23/2009 3400, Order broadcast 10/30/2009 3800, Order produced 10/31/2009 got my Vin #62932 on 11/04/2009 4200, Shipped 11/4/2009 - Railroad rail number ETTX852716 |
05-08-2012, 08:59 PM | #27 |
Drives: 2012 45th 2LT/RS Join Date: Apr 2011
Location: Nashville, TN (Antioch/La Vergne)
Posts: 359
|
Interesting. Keep us updated. I'm still kinda waiting around to bite the bullet on the Scosche kit.
__________________
Mods: RX Catch Can / MRT Version 2.0 Exhaust / RotoFab CAI / Apex Motorsports Scoop + Windshield Washer Bottle Relocation / Hurst "HardDrive" Plate / Mud Guards / Heritage Grill + Street Scene Lower Valance / Metra Kit + Pioneer AVIC Z120BT / AAC "Ghosted" LED Concept Side Markers / P13W Plasma LED Bulbs + DRL Harness
|
05-08-2012, 09:24 PM | #28 |
|
I'll be putting mine in this weekend so ill be able to help problem solve, I hope I don't have the same issues.
Last edited by montej23; 05-08-2012 at 10:28 PM. |
|
|
|
|