Scosche and Pioneer AVIC-Z140BH - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camarograna2 · 07-21-2012, 08:41 PM

Quote:

Originally Posted by LIV4MUDDIN

Just talked to Kenwood and they said for the Ipod I will have to run the Ipod cable with the head phone jack to have sound. So I guess I will just hook up the usb side to the console for if I wanna use a thumb drive.

Yeah that's right. I have iPod on glovebox and the USB in the center console is used for updates and changing splash screen

montej23 · 07-22-2012, 03:04 AM

Quote:

Originally Posted by camarograna2

Yeah that's right. I have iPod on glovebox and the USB in the center console is used for updates and changing splash screen

thats right because i have the cable for the ipod to work in my car with the avic 140

Squiffy · 07-22-2012, 12:31 PM

Quote:

Originally Posted by Flynnaz

How do you update the firmware on the Scosche? After the install, what steering buttons do not work?

Theres a USB in the back of the kit. At least for the Alpine kit there is. The two kits are basically the same thing. Its going to be a pain getting to it so I hope a mandatory firmware update isn't coming out soon.

Birm · 09-03-2012, 11:34 AM

I know this thread is a little dated but maybe someone see's and can help me.
I cannot get my SWC's to work to save my life! I have sat in my car and waited the time, over and over again. Also my reverse camera is acting up, it goes to the picture like its suppose too but when I come out of reverse and go into gear it goes to the black screen that has the message about the viewing being reversed or distance or something and if I dont turn off the camera on my homescreen it will periodically go back to this screen while I am driving.. Anyone!?

Oh something important, my Headunit is the Pioneer AV-8400-BH.

Please help!

montej23 · 09-05-2012, 11:46 PM

I didnt use the SWC the Scosche deck allowed it to connect directly to the car

Birm · 09-06-2012, 02:23 PM

Quote:

Originally Posted by montej23

I didnt use the SWC the Scosche deck allowed it to connect directly to the car

I am sorry, I am not intending to be rude but I honestly do not understand what you are saying.

camarograna2 · 09-06-2012, 05:57 PM

i guess he is saying he didnt need an additional swc adapter as the adapter is integrated into the scosche dash kit? I dunno i dont speak oklahomian

Birm · 09-06-2012, 09:21 PM

Quote:

Originally Posted by camarograna2

i guess he is saying he didnt need an additional swc adapter as the adapter is integrated into the scosche dash kit? I dunno i dont speak oklahomian

Got it I think, thanks for the translation

VoodooVyper · 10-08-2012, 04:46 PM

Didn't want to start a new thread for this, but did Pioneer announce anything on an iPhone 5 cable accessory for this unit? I have the CD-IU51V, does anyone know if the Apple adapter will work with this?

cgworth · 10-14-2012, 08:59 AM

During my install i noticed a coax cable cut in the group with the antennas (radio and xm) does anyone know what this was used for? is this prewired for the backup camera? I assume the factory cut this wire but unsure why

Caddyroger · 10-15-2012, 05:14 PM

Quote:

Originally Posted by cgworth

During my install i noticed a coax cable cut in the group with the antennas (radio and xm) does anyone know what this was used for? is this prewired for the backup camera? I assume the factory cut this wire but unsure why

Can you post a picture of the wires? I have the Pioneer AVIC Z140BH. I do not have any cut wires. I not getting what you are talking about. IF I can see the pic of the wires I might able to tell what it is.

cazop · 10-18-2012, 07:42 PM

Stupid question because i probably already know the answer. But being that i live in north jersey it would be nice to know the outside air temp for the winter. Replacing the factory head unit will eliminate the OAT display. Is there any other options?

5th_GEN_SS · 04-13-2013, 07:19 AM

I am having issues to my kit being wired to a pioneer 1400dvd
It turned on for about 3 seconds and them went out. Neither the unit or kit are getting power but the ac is blowing. Is it possible something is wired wrong I had a left over pink wire with a white stripe and a yellow/black from the radio harness.. On the kit there was a brown, and a few others I didn't use.
You can also text me 4403911701
Chris

Thanks I really need to get this up and running.

texasrunner0516 · 04-13-2013, 09:31 AM

Quote:

Originally Posted by VoodooVyper

Didn't want to start a new thread for this, but did Pioneer announce anything on an iPhone 5 cable accessory for this unit? I have the CD-IU51V, does anyone know if the Apple adapter will work with this?

Yes the Apple adapter will work, i have been using it since i got my iphone5

09-06-2012, 05:57 PM	#63
camarograna2 Car Enthusiast Drives: 2010 Rally Yellow Camaro 2SS A/T Join Date: Dec 2010 Location: Keller, Texas Posts: 760 View My Garage	i guess he is saying he didnt need an additional swc adapter as the adapter is integrated into the scosche dash kit? I dunno i dont speak oklahomian __________________ 2010 Rally Yellow 2SS/RS Performance Upgrades: Custom Flowmaster X system Exhaust Audio Upgrades: Too much to write down. Visit http://www.camaro5.com/forums/showthread.php?t=206016

10-08-2012, 04:46 PM	#65
VoodooVyper Drives: 2012 IBM Camaro 1LT/RS Join Date: Oct 2011 Location: MA Posts: 275 View My Garage	Didn't want to start a new thread for this, but did Pioneer announce anything on an iPhone 5 cable accessory for this unit? I have the CD-IU51V, does anyone know if the Apple adapter will work with this? __________________ 2012 Camaro IBM 1LT RS Auto 10/11/2011 (1102) 10/11/2011 (1100) 10/18/2011 (2000) 10/18/2011 (2500) 10/18/2011 (3000) TPW 11/7 10/29/2011 (3100,3300) 11/01/2011 (3400) 11/08/2011 (3800) 11/09/2011 (4B00) 11/14/2011 (4200) 11/18/2011 (4800) 11/21/2011 (5000)

04-13-2013, 07:19 AM	#69
5th_GEN_SS Junkie Drives: SIM 2SS/RS M6 Join Date: Sep 2008 Location: Cleveland, Ohio Posts: 1,695 View My Garage	I am having issues to my kit being wired to a pioneer 1400dvd It turned on for about 3 seconds and them went out. Neither the unit or kit are getting power but the ac is blowing. Is it possible something is wired wrong I had a left over pink wire with a white stripe and a yellow/black from the radio harness.. On the kit there was a brown, and a few others I didn't use. You can also text me 4403911701 Chris Thanks I really need to get this up and running. __________________ "Letty" Murdered out 2013 Camaro 1LE. (Old car SIM 2010 2SS/RS)

09-03-2012, 11:34 AM	#60
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	I know this thread is a little dated but maybe someone see's and can help me. I cannot get my SWC's to work to save my life! I have sat in my car and waited the time, over and over again. Also my reverse camera is acting up, it goes to the picture like its suppose too but when I come out of reverse and go into gear it goes to the black screen that has the message about the viewing being reversed or distance or something and if I dont turn off the camera on my homescreen it will periodically go back to this screen while I am driving.. Anyone!? Oh something important, my Headunit is the Pioneer AV-8400-BH. Please help!

09-05-2012, 11:46 PM	#61
montej23 Drives: 2011 VR Camaro Join Date: Jun 2009 Location: Arkansas Posts: 974 View My Garage	I didnt use the SWC the Scosche deck allowed it to connect directly to the car

10-14-2012, 08:59 AM	#66
cgworth Drives: Black RS2SS Join Date: Feb 2012 Location: Columbus Ga Posts: 39	During my install i noticed a coax cable cut in the group with the antennas (radio and xm) does anyone know what this was used for? is this prewired for the backup camera? I assume the factory cut this wire but unsure why

10-18-2012, 07:42 PM	#68
cazop Drives: 2010 2SS RS Camaro Join Date: Jun 2010 Location: Kinnelon, NJ Posts: 4	Stupid question because i probably already know the answer. But being that i live in north jersey it would be nice to know the outside air temp for the winter. Replacing the factory head unit will eliminate the OAT display. Is there any other options?