07-13-2014, 03:58 PM | #85 | |
Drives: 2010 VR 2LT, 2014 Charger SXT Join Date: Aug 2009
Location: San Antonio, TX
Posts: 93
|
Quote:
Ok as for the infinite chime I've found that by putting the car in reverse it kills the chime. Yes it's an extra step that you shouldn't need to do but it works. When I first installed the kit I went through the whole motion of taking the key back out of the ignition opening then closing my door and restarting my car on the off chance that the chime would go away. |
|
07-14-2014, 01:52 PM | #86 |
Lifestyle = Deathstyle
|
Press the hazard button - that will stop the chime. Learned that from another member in the Attention Sosche thread.
__________________
11 2SS/RS
|
07-14-2014, 02:32 PM | #87 |
Drives: 2014 2SS RS Coupe Join Date: Aug 2013
Location: Phoenix
Posts: 1,454
|
Unfortunately everything on the kit worked besides the chimes. Even in reverse it would go off. I had sonic send me a new kit.
__________________
|
10-14-2014, 09:57 AM | #88 |
|
I've got the same issue with the lock/unlock. I'm guessing that the 2010's had the lock/unlock buttons on the center console. Don't know when it was switched but my 2013 has the door buttons. If you have the door buttons, the buttons on the Scosche won't work. Also having issues with the SWCs going in and out, and the presets seem to keep reverting back to factory. I'm taking my car in to Audiotronics at noon today for a SW install and they hopefully will have the answers ready from the factory.
|
02-17-2016, 10:06 AM | #89 |
Drives: 2012 camaro Join Date: Feb 2016
Location: delaware
Posts: 2
|
tuck wires behind dash
How did you tuck all the wires on scoshe kit having major problems with that can you offer any advice ?
|
02-21-2016, 08:08 PM | #90 |
The scorche kit is crap don't buy it had professionals try several times gave up and got the merta kit no problems the on star even works it also displays outsid temperature
|
|
02-21-2016, 11:12 PM | #91 |
Drives: Camaro Join Date: May 2015
Location: NJ
Posts: 7
|
Does this kit require any soldering or do you need to buy specific harnesses?
|
02-22-2016, 02:16 PM | #92 |
Drives: 2012 2SS/RS IOM Join Date: Nov 2011
Location: Concord, Ca
Posts: 204
|
|
04-15-2016, 11:28 AM | #93 |
Can anyone help me out I installed a scosche kit and a kenwood 9980hd a cpl years ago and I could never get my fm or am to work I got rid of the Onstar because the kenwood has Bluetooth and nav I also put the sat radio module in and it all works but am and fm... Also should I be able to see videos on the screen? I have the brake jumped out but my son has a pioneer and he can watch vids over Bluetooth... I pulled it all back out and was thinking the blue wire needed to be hooked up but that didn't do it either
|
|
|
|
|
|