08-02-2012, 04:17 PM | #1 |
Drives: 2012 CAMARO ZL1 COUPE Join Date: May 2009
Location: Marlton, NJ
Posts: 18
|
Upgrade Performance Choice
I'm thinking of one of these 2. Has anyone here done either or and what thoughts would be out there?
Option #1 $2195.00 Lingenfelter 650HP L650162012 Lingenfelter High Flow Camaro ZL1 Cold Air Intake LSA 2012-2013 - L220050709 Cadillac CTS-V Camaro ZL1 Overdrive Harmonic Balancer Kit 2009-2012 - L220070709 Cadillac CTS-V Camaro ZL1 10% Overdrive Balancer Pulley 2009-2012 - L250150309 Lingenfelter CTS-V Camaro ZL1 LSA LS9 10 bolt Supercharger Pulley Hub - L220300709 Lingenfelter CTS-V Camaro ZL1 LSA 2.55 8 Rib 10 Bolt Pulley - L960130709 Lingenfelter Supercharger Isolator Coupling LS9 LSA Engine 2009-2012 - K080670 8 Rib Poly V Belt For 10% Overdrive Pulley & 2.55 Upper Pulley 67.0 inches - L310065307 Lingenfelter 160 Degree Thermostat - L730100309 Bosch LS9 LSA 63 lb Fuel Injectors Option #2 $1434.00 SLP Performance Stage 3 650HP W/O the headers so this kit is really about 625HP •Hand-Held Programmer w/Custom SLP Tune (#27025) •Blackwing Air-Filter (21124) •160° Thermostat (100229) •1-3/4" Long-Tube Header Package (#30216) •2.5" Supercharger Pulley •Larger Idler Pulley •65-lb/per hr Fuel Injectors (#12421) |
08-02-2012, 04:50 PM | #2 |
Petro-sexual
|
#1 all the way I believe you'd be way more than 600-at the tires
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
08-02-2012, 05:29 PM | #3 |
CaRaHoLiC
Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011
Location: B.C. Canada
Posts: 1,701
|
yeah except the pulleys have been backordered for over a month
__________________
2012 ZL1
2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me. |
08-03-2012, 06:28 AM | #4 |
Drives: 2012 CAMARO ZL1 COUPE Join Date: May 2009
Location: Marlton, NJ
Posts: 18
|
Micky....good stuff there. Am I right to see that you did the Headers but not long tube. Used the same ehaust? How is the sound? Too loud or just right...had SLP long tube on my 2010 SS and after while they got to me on longer drives!!!
|
08-04-2012, 08:44 AM | #5 |
Drives: 1998 Camaro Z28 Join Date: Sep 2009
Location: Indiana
Posts: 172
|
|
08-04-2012, 08:48 AM | #6 |
CaRaHoLiC
Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011
Location: B.C. Canada
Posts: 1,701
|
yay!!!!!
__________________
2012 ZL1
2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me. |
08-04-2012, 08:49 AM | #7 | |
CaRaHoLiC
Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011
Location: B.C. Canada
Posts: 1,701
|
Quote:
Correct me if I'm wrong, but doesn't the owners manual state specifically NO alcohol additives or fuel on these engines?
__________________
2012 ZL1
2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me. |
|
08-04-2012, 11:07 AM | #8 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
08-04-2012, 05:34 PM | #9 |
CaRaHoLiC
Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011
Location: B.C. Canada
Posts: 1,701
|
Holy hell that was outta left field......
-Well now that the poster deleted the angry post I was referring to, this statement appears to make no sense at all. disregard and carry on, lol...
__________________
2012 ZL1
2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me. Last edited by 2012ZL1; 08-10-2012 at 02:50 PM. |
08-05-2012, 05:49 PM | #10 | |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Quote:
I will have the moderators move this to vendor reviews were it belongs. According to this it is still on time from date of shipment - |
|
08-05-2012, 06:56 PM | #11 |
Drives: 12' ZL1, AGM 6M Join Date: Jun 2009
Location: 49th state
Posts: 249
|
Wayne, have you tried calling?
He always answers his phone during business hours. Sometimes even during other hours- |
08-05-2012, 08:01 PM | #12 |
Drives: 2012 CAMARO ZL1 COUPE Join Date: May 2009
Location: Marlton, NJ
Posts: 18
|
Gonna order the 650 kit Mon am.....wish me luck....hope all the parts are in and my tech can get er done.
|
08-05-2012, 09:22 PM | #13 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
The Lingenfelter kit does not include a tune? Just curious?
|
08-05-2012, 09:40 PM | #14 |
Drives: 1998 Camaro Z28 Join Date: Sep 2009
Location: Indiana
Posts: 172
|
|
|
|
|
|