Roto-fab Alternative to ADM Scoop - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSCAMARO · 09-23-2010, 01:30 PM

Attached are pictures of my way of providing additional fresh air to my Roto-fab CAI intake box. Step one: remove the L/H wheel well liner. Step two: remove factory windshield washer bottle. (Replace with bag type if you like at a relocated location. Step three: remove L/H fog lamp assembly. Step four: Install perforated cover plate and reinstall black trim piece. It takes about an hour or so and provides lots of fresh air to the air box. I know someone is going to ask what the perforated stainless steel cover plate is so I may as well take my licks up front..... It is a $3.99 stainless steel shower drain cover from Lowes

This is just for functionality at point, I'm really not working under a shade tree

. It will be very obvious even at a distance who has done this when the approaching Camaro has only the R/H fog lamp lighted. Who knows, it just might catch on and become a club. For now it's just me.

orange-prince · 09-23-2010, 01:34 PM

i like your thinking result

2SSCAMARO · 09-23-2010, 01:45 PM

Quote:

Originally Posted by 2SSCAMARO

Attached are pictures of my way of providing additional fresh air to my Roto-fab CAI intake box. Step one: remove the L/H wheel well liner. Step two: remove factory windshield washer bottle. (Replace with bag type if you like at a relocated location. Step three: remove L/H fog lamp assembly. Step four: Install perforated cover plate and reinstall black trim piece. It takes about an hour or so and provides lots of fresh air to the air box. I know someone is going to ask what the perforated stainless steel cover plate is so I may as well take my licks up front..... It is a $3.99 stainless steel shower drain cover from Lowes

This is just for functionality at point, I'm really not working under a shade tree

. It will be very obvious even at a distance who has done this when the approaching Camaro has only the R/H fog lamp lighted. Who knows, it just might catch on and become a club. For now it's just me.

Sorry, there is one step I left out.....reinstall the wheel well liner after previous steps are complete.

ssmike · 09-23-2010, 06:07 PM

Hmmm! Now you got me thinking! Only problem is that darn washer bottle, I gotta have my squirts!

FASST 1 · 09-23-2010, 07:09 PM

You really wanted more air bad!

FRANK121 · 09-23-2010, 09:33 PM

Rather than getting more air in I'm going to try and insulate my RotoFab with this stuff

http://www.homedepot.com/webapp/wcs/...de=cii_9324560

I use to use this stuff on the bottom side of my motorcycle gas tanks to keep the engine heat off the the tank. Do you think it would be better on the outside of the air box, the inside of the air box or put in on both sides of the RotoFab box?

I will try and take some pics when finished .... Hey, It can't hurt right?

LosXC451 · 09-23-2010, 10:07 PM

Quote:

Originally Posted by FRANK121

Rather than getting more air in I'm going to try and insulate my RotoFab with this stuff

http://www.homedepot.com/webapp/wcs/...de=cii_9324560

I use to use this stuff on the bottom side of my motorcycle gas tanks to keep the engine heat off the the tank. Do you think it would be better on the outside of the air box, the inside of the air box or put in on both sides of the RotoFab box?

I will try and take some pics when finished .... Hey, It can't hurt right?

thats a tough one..both sides if you really wanna make a little bit of a difference, but if not maybe just one side

gearhead440 · 09-24-2010, 06:18 AM

washer bag replacement for washer bottle

2SSCAMARO · 09-24-2010, 06:19 AM

Quote:

Originally Posted by FASST 1

You really wanted more air bad!

Right, now I'm getting lots of fresh cooler 90+ degree ambient Florida air.

Hicompression · 09-24-2010, 07:31 AM

Quote:

Originally Posted by 2SSCAMARO

It is a $3.99 stainless steel shower drain cover from Lowes

I probably would have used some Florida mosquito screen instead.

StlRomAniaN · 09-24-2010, 10:39 AM

Quote:

Originally Posted by 2SSCAMARO

Right, now I'm getting lots of fresh cooler 90+ degree ambient Florida air.

hahahaha I love the sarcasm, that's great. That made me laugh out loud. Grab a beer

CamaroCowboy · 10-04-2010, 10:43 AM

Where can I get the washer bag? Someone PM info if they know...thanks

josh1147 · 10-04-2010, 09:48 PM

Quote:

Originally Posted by CamaroCowboy

Where can I get the washer bag? Someone PM info if they know...thanks

ahhh, looks like you have to go to a Ford Parts Counter..."FoMoCo" printed right on the bag....if that's so, no way in hell it would ever end up in my Camaro....and shouldn't be in yours either.

2SSCAMARO · 10-05-2010, 06:25 AM

Quote:

Originally Posted by josh1147

ahhh, looks like you have to go to a Ford Parts Counter..."FoMoCo" printed right on the bag....if that's so, no way in hell it would ever end up in my Camaro....and shouldn't be in yours either.

Ya you're probably right. Without a free 50 Billion dollar handout to keep em in business, it probably is not made very well.

09-23-2010, 01:30 PM	#1
2SSCAMARO Drives: 2010 Camaro Auto Join Date: Mar 2010 Location: Fl Posts: 1,164	Roto-fab Alternative to ADM Scoop Attached are pictures of my way of providing additional fresh air to my Roto-fab CAI intake box. Step one: remove the L/H wheel well liner. Step two: remove factory windshield washer bottle. (Replace with bag type if you like at a relocated location. Step three: remove L/H fog lamp assembly. Step four: Install perforated cover plate and reinstall black trim piece. It takes about an hour or so and provides lots of fresh air to the air box. I know someone is going to ask what the perforated stainless steel cover plate is so I may as well take my licks up front..... It is a $3.99 stainless steel shower drain cover from Lowes This is just for functionality at point, I'm really not working under a shade tree . It will be very obvious even at a distance who has done this when the approaching Camaro has only the R/H fog lamp lighted. Who knows, it just might catch on and become a club. For now it's just me. Attached Images

09-23-2010, 07:09 PM	#5
FASST 1 Drives: Black 1SS Join Date: Apr 2009 Location: Pittsburgh, PA Posts: 442	You really wanted more air bad! __________________

09-24-2010, 06:18 AM	#8
gearhead440 Drives: Yellow 2SS, 6 speed manual Join Date: Jan 2010 Location: Concord, NC Posts: 218	washer bag replacement for washer bottle Attached Images __________________ Hers & His

10-04-2010, 10:43 AM	#12
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	Where can I get the washer bag? Someone PM info if they know...thanks __________________ Texas speed LT Headers and High Flow Cats, Magnaflow 3 inch cat-back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor, Custom Grill, Amber AAC Headlight and Fog Light Halo, Amber footwell Lighting, Amber under hood lighting, RK Sport Ram Air /Heat Extractor Hood and ADM Racing Scoop. 447.9 RWHP 428 TQ My car is exactly that, No one has to like it but me!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ADM Intake Scoop Data at the track	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	31	01-22-2012 11:05 PM
CAI: ADM street vs Roto Fab	gm2376	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	10	04-30-2011 08:23 PM
500 mile 2010 Camaro Roto Fab intake!!!	tbird31	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	19	12-02-2010 04:04 PM
ADM RACE SCOOP INSTALL PICS	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	38	11-08-2010 09:11 AM
Roto Fab CAI with IOM PAint	Coop	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	09-29-2009 04:25 PM

09-23-2010, 01:34 PM	#2
orange-prince QATAR 2022 Drives: black cts-V coupe a6 Join Date: Apr 2010 Location: doha-qatar ( middle east ) Posts: 983	i like your thinking result

09-23-2010, 06:07 PM	#4
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,840	Hmmm! Now you got me thinking! Only problem is that darn washer bottle, I gotta have my squirts!

09-23-2010, 09:33 PM	#6
FRANK121 Drives: 2022 Camaro ZL1 Join Date: Sep 2010 Location: Sullivan, Missouri Posts: 653 View My Garage	Rather than getting more air in I'm going to try and insulate my RotoFab with this stuff http://www.homedepot.com/webapp/wcs/...de=cii_9324560 I use to use this stuff on the bottom side of my motorcycle gas tanks to keep the engine heat off the the tank. Do you think it would be better on the outside of the air box, the inside of the air box or put in on both sides of the RotoFab box? I will try and take some pics when finished .... Hey, It can't hurt right?