front licence plate holder - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

stt816 · 07-05-2014, 07:49 AM

I know there are a lot of threads on this but mine is kind of specific. I would want my license plate mounted off center and able to detach from the bumper or fold underneath (not motorized)....I have a ZL1 Bumper.

http://shop.bigmikesperformanceparts...-ZL1-SNS26.htm

would i be able to mount this off center?

The image below is what I mean. That is a grand sport plate holder but I'd like to be able to detach it easier, or fold it underneath

Kid · 07-05-2014, 07:59 AM

IMHO, I think any of the fold away versions will move a bit while driving, and scuff up you splitter, spolier, bumper, etc.

stt816 · 07-05-2014, 08:00 AM

maybe you're right but the above link detaches completely, wondering if that can be mounted like the picture

DaveA · 07-05-2014, 08:10 AM

$89.99 or $.50 for two black zip ties. I went with the zip ties. One year later and no issues.

Kid · 07-05-2014, 08:13 AM

Maybe get a universal plat holder from Auto Zone, put some rubber weather stripping on the contact areas, and use wall anchors to secure it through the lower grill. You'll still need a screw driver to remove it, but no holes.

scoticus.rex · 07-05-2014, 08:13 AM

This is what I use. http://eliminatorbracket.com/2010_Ca...nse_plate.html

It is detachable in about 2 seconds and requires no holes. Basically clamps discretely around your lower grill.

stt816 · 07-05-2014, 08:14 AM

^ definitely a good option but I really wanted it to be off center and on the splitter

45thCamaro · 07-05-2014, 08:20 AM

Show and go plate frame holder manual. I used it for a couple of years. Worked great.

Kid · 07-05-2014, 08:21 AM

If I was to go with the one pictured, I would run some foam weather strip along the contact point. Should hold up okay. I imagine the splitters will be taking a beating with stones anyway, so hopefully they have a tough finish.

stt816 · 07-05-2014, 08:22 AM

Quote:

Originally Posted by 45thCamaro

Show and go plate frame holder manual. I used it for a couple of years. Worked great.

http://www.amazon.com/Show-Go-Licens...ds=Show+and+go

I was looking at the show and go but then saw all the bad reviews on highway speeds

Kid · 07-05-2014, 08:53 AM

I would be even more concerned about this on your car, seeing as the splitter is pushing the plate out a couple of inches. Also, what's the point of a splitter? To pull air over the top of it. Right into your plate. Lots of buffering at highway speed, I would imagine.
I see you're in CT. I live in Milford, and have never been questioned about the plate...despite being puilled over a few times. Personally, I would risk the small ticket. Front plates are for mini vans

stt816 · 07-05-2014, 08:55 AM

im 22 driving a ss with headers, cold air intake and full catback (stainless works retro chambered) with a tune it's real loud but i love it haha....cops look for a reason to pull me over, been pulled over about 4 times just about the plate, no speeding involved...i'd rather just put it on

Kid · 07-05-2014, 09:00 AM

Ahh...DWY. Driving while young. I remember those days. lol

ratfinkharley · 07-05-2014, 09:01 AM

Stamford cops are real b busters. Be sure to set your cruise control to 40 when driving on HRR or LRR.

07-05-2014, 07:49 AM	#1
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	front licence plate holder I know there are a lot of threads on this but mine is kind of specific. I would want my license plate mounted off center and able to detach from the bumper or fold underneath (not motorized)....I have a ZL1 Bumper. http://shop.bigmikesperformanceparts...-ZL1-SNS26.htm would i be able to mount this off center? The image below is what I mean. That is a grand sport plate holder but I'd like to be able to detach it easier, or fold it underneath Attached Images

07-05-2014, 07:59 AM	#2
Kid Drives: 2011 Camaro 2LT, 68 Camaro RS Join Date: May 2010 Location: Milford, CT Posts: 627 View My Garage	IMHO, I think any of the fold away versions will move a bit while driving, and scuff up you splitter, spolier, bumper, etc. __________________ 2011 Black/Inferno 2LT. Inferno Brembos, MRT 2.0, Vararam, BBK LTs, RX Catch Can, VMAX ICE-olator, VMAX P/P Throttle Body, Monster clutch, MGW Shifter, OverKill Tuned.

07-05-2014, 08:13 AM	#5
Kid Drives: 2011 Camaro 2LT, 68 Camaro RS Join Date: May 2010 Location: Milford, CT Posts: 627 View My Garage	Maybe get a universal plat holder from Auto Zone, put some rubber weather stripping on the contact areas, and use wall anchors to secure it through the lower grill. You'll still need a screw driver to remove it, but no holes. __________________ 2011 Black/Inferno 2LT. Inferno Brembos, MRT 2.0, Vararam, BBK LTs, RX Catch Can, VMAX ICE-olator, VMAX P/P Throttle Body, Monster clutch, MGW Shifter, OverKill Tuned.

07-05-2014, 08:13 AM	#6
scoticus.rex LTC, USA Drives: Hobbes - 2013 Camaro 2SS RS M6 Join Date: Sep 2013 Location: Northern Virginia Posts: 419 View My Garage	This is what I use. http://eliminatorbracket.com/2010_Ca...nse_plate.html It is detachable in about 2 seconds and requires no holes. Basically clamps discretely around your lower grill. __________________ _____________________________________ ~Rex Hobbes - 2013 Camaro 2SS RS M6

07-05-2014, 08:21 AM	#9
Kid Drives: 2011 Camaro 2LT, 68 Camaro RS Join Date: May 2010 Location: Milford, CT Posts: 627 View My Garage	If I was to go with the one pictured, I would run some foam weather strip along the contact point. Should hold up okay. I imagine the splitters will be taking a beating with stones anyway, so hopefully they have a tough finish. __________________ 2011 Black/Inferno 2LT. Inferno Brembos, MRT 2.0, Vararam, BBK LTs, RX Catch Can, VMAX ICE-olator, VMAX P/P Throttle Body, Monster clutch, MGW Shifter, OverKill Tuned.

07-05-2014, 08:00 AM	#3
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	maybe you're right but the above link detaches completely, wondering if that can be mounted like the picture

07-05-2014, 08:10 AM	#4
DaveA Drives: 2013 Camaro SS vert Join Date: Jul 2013 Location: Boston Posts: 199	$89.99 or $.50 for two black zip ties. I went with the zip ties. One year later and no issues.

07-05-2014, 08:14 AM	#7
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	^ definitely a good option but I really wanted it to be off center and on the splitter

07-05-2014, 08:20 AM	#8
45thCamaro Drives: 2012 Camaro 45th Anniversary RS Join Date: Nov 2012 Location: New York Posts: 2,418	Show and go plate frame holder manual. I used it for a couple of years. Worked great.

07-05-2014, 08:53 AM	#11
Kid Drives: 2011 Camaro 2LT, 68 Camaro RS Join Date: May 2010 Location: Milford, CT Posts: 627 View My Garage	I would be even more concerned about this on your car, seeing as the splitter is pushing the plate out a couple of inches. Also, what's the point of a splitter? To pull air over the top of it. Right into your plate. Lots of buffering at highway speed, I would imagine. I see you're in CT. I live in Milford, and have never been questioned about the plate...despite being puilled over a few times. Personally, I would risk the small ticket. Front plates are for mini vans __________________ 2011 Black/Inferno 2LT. Inferno Brembos, MRT 2.0, Vararam, BBK LTs, RX Catch Can, VMAX ICE-olator, VMAX P/P Throttle Body, Monster clutch, MGW Shifter, OverKill Tuned.

07-05-2014, 08:55 AM	#12
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	im 22 driving a ss with headers, cold air intake and full catback (stainless works retro chambered) with a tune it's real loud but i love it haha....cops look for a reason to pull me over, been pulled over about 4 times just about the plate, no speeding involved...i'd rather just put it on

07-05-2014, 09:00 AM	#13
Kid Drives: 2011 Camaro 2LT, 68 Camaro RS Join Date: May 2010 Location: Milford, CT Posts: 627 View My Garage	Ahh...DWY. Driving while young. I remember those days. lol __________________ 2011 Black/Inferno 2LT. Inferno Brembos, MRT 2.0, Vararam, BBK LTs, RX Catch Can, VMAX ICE-olator, VMAX P/P Throttle Body, Monster clutch, MGW Shifter, OverKill Tuned.

07-05-2014, 09:01 AM	#14
ratfinkharley Drives: 15 JKU, 00 S10, 73 Vette, 12 JK Join Date: Jan 2014 Location: garage Posts: 370	Stamford cops are real b busters. Be sure to set your cruise control to 40 when driving on HRR or LRR. __________________ RotoFab CAI - VMaxx Ported TB - Apex Catch Can - CFD Shifter - Choppers Inc Loaded Dice Shift Knob