Insidethreat07's build/mod (somewhat) thread - Page 30 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

insidethreat07 · 06-18-2012, 06:33 PM

Start ordering the exhaust stuff piece by piece or save up some $$$ for school in august and C5FIII. Choices choices lol

dmginc · 06-18-2012, 07:41 PM

Quote:

Originally Posted by insidethreat07

Start ordering the exhaust stuff piece by piece or save up some $$$ for school in august and C5FIII. Choices choices lol

thats a tough one...exhaust.

xXSilencerXx · 06-18-2012, 07:49 PM

I chose school back in the day, now I got a 5th gen and the TA. It worked out well for me. lol

insidethreat07 · 06-18-2012, 08:50 PM

Quote:

Originally Posted by dmginc

thats a tough one...exhaust.

Quote:

Originally Posted by xXSilencerXx

I chose school back in the day, now I got a 5th gen and the TA. It worked out well for me. lol

School and the fest are gonna come first. Hopefully I can squeeze the parts in between lol

demonspeed · 06-19-2012, 08:40 AM

Don't feel bad about choosing school over parts. I chose cars over school right out of high school. While I had a lot of fun, I'd be having a lot more fun had I done school first. Now I'm a 29yo Junior. Better late than never -- just don't do it like I am!

xXSilencerXx · 06-19-2012, 11:10 AM

Quote:

Originally Posted by insidethreat07

School and the fest are gonna come first. Hopefully I can squeeze the parts in between lol

Yep, I did my suspension Sophomore year of college once I got a decent paying internship. Now I've graduated and am in the Air Force, I'm making plenty of money to buy the parts I need to build that car how I want.

Quote:

Originally Posted by demonspeed

Don't feel bad about choosing school over parts. I chose cars over school right out of high school. While I had a lot of fun, I'd be having a lot more fun had I done school first. Now I'm a 29yo Junior. Better late than never -- just don't do it like I am!

Exactly.

insidethreat07 · 06-20-2012, 02:19 PM

Thoughts:
http://www.ebay.com/itm/3-EXHAUST-CA...131a74&vxp=mtr

Or would it be better not to have a cut out? Or what what be a good one to get and where would be the best place to put it?

demonspeed · 06-20-2012, 03:56 PM

You may want to take a look at DMH and QTP, too.

I'm not sure how much of a result you'd get from a cutout, though.

insidethreat07 · 06-20-2012, 04:03 PM

Quote:

Originally Posted by demonspeed

You may want to take a look at DMH and QTP, too.

I'm not sure how much of a result you'd get from a cutout, though.

Id almost rather have a manual one compared to an electic one lol
http://www.ebay.com/itm/QTP-10300-3-...f1e175&vxp=mtr
Where would be a good place to locate it?

insidethreat07 · 06-20-2012, 04:08 PM

Not bad
http://www.dmhperformance.com/ecutout.htm

Zabo · 06-20-2012, 04:54 PM

Quote:

Originally Posted by insidethreat07

Not bad
http://www.dmhperformance.com/ecutout.htm

One should be going on my car within the next two weeks.. Wired into the drivers seat controls, of course.

Best place to locate a cutout is in the I pipe before the axle. But since I have a bullet there, I'm installing mine to be the connection point between the Y and I pipes. If you're going electric, neat thing is that the body seal plugs for the floors can be sliced to allow the wires into the cabin without drilling any holes. Run it under the carpet to the console/seat and wire it in to power.

insidethreat07 · 06-20-2012, 05:01 PM

I might just skip the whole cut out idea lol

demonspeed · 06-20-2012, 06:27 PM

Quote:

Originally Posted by insidethreat07

I might just skip the whole cut out idea lol

I think you would be better to spend the money elsewhere.

Lee0123567 · 06-20-2012, 06:51 PM

I agree, don't put a cutout on a v6. It sounds like shit.

In my opinion cutout are for sleeper cars with big engines that have a quiet exhaust on them so when a honda tries to be badass you can just open the cutout and leave 30ft black posi peel out marks. 30ft however can, in some/most cases be an understatement.

06-18-2012, 06:33 PM	#407
insidethreat07 Drives: 2001 Camaro 3.8 Join Date: Jul 2010 Location: Continental Ohio Posts: 11,108 View My Garage	Start ordering the exhaust stuff piece by piece or save up some $$$ for school in august and C5FIII. Choices choices lol __________________ 2001 Camaro V6 2016 Camaro 2SS

06-18-2012, 07:49 PM	#409
xXSilencerXx Butter Bar! Drives: 2011 SS, 1998 Trans Am Join Date: Dec 2010 Location: Patrick AFB, FL Posts: 1,364	I chose school back in the day, now I got a 5th gen and the TA. It worked out well for me. lol __________________ 2011 Camaro SS, White/Orange, LSR Short Throw, CAI 1998 Trans Am, Red, H/C/I, 3200 CircleD Stall, full suspension 2004 GSXR 1k, Matt Mladin Edition

06-19-2012, 08:40 AM	#411
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	Don't feel bad about choosing school over parts. I chose cars over school right out of high school. While I had a lot of fun, I'd be having a lot more fun had I done school first. Now I'm a 29yo Junior. Better late than never -- just don't do it like I am! __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

06-20-2012, 02:19 PM	#413
insidethreat07 Drives: 2001 Camaro 3.8 Join Date: Jul 2010 Location: Continental Ohio Posts: 11,108 View My Garage	Thoughts: http://www.ebay.com/itm/3-EXHAUST-CA...131a74&vxp=mtr Or would it be better not to have a cut out? Or what what be a good one to get and where would be the best place to put it? __________________ 2001 Camaro V6 2016 Camaro 2SS

06-20-2012, 03:56 PM	#414
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	You may want to take a look at DMH and QTP, too. I'm not sure how much of a result you'd get from a cutout, though. __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

06-20-2012, 04:08 PM	#416
insidethreat07 Drives: 2001 Camaro 3.8 Join Date: Jul 2010 Location: Continental Ohio Posts: 11,108 View My Garage	Not bad http://www.dmhperformance.com/ecutout.htm __________________ 2001 Camaro V6 2016 Camaro 2SS

06-20-2012, 05:01 PM	#418
insidethreat07 Drives: 2001 Camaro 3.8 Join Date: Jul 2010 Location: Continental Ohio Posts: 11,108 View My Garage	I might just skip the whole cut out idea lol __________________ 2001 Camaro V6 2016 Camaro 2SS

06-20-2012, 06:51 PM	#420
Lee0123567 Nope! v6. Drives: 2001 SOM v6 Join Date: Mar 2012 Location: Ottawa, OH Posts: 459	I agree, don't put a cutout on a v6. It sounds like shit. In my opinion cutout are for sleeper cars with big engines that have a quiet exhaust on them so when a honda tries to be badass you can just open the cutout and leave 30ft black posi peel out marks. 30ft however can, in some/most cases be an understatement. __________________ 3" Magnaflow cat-back, MSD 8.5mm Super Conductor Wires, NGK Iridium plugs, KN Air Filter, Halo Headlights, Shaved Air Lid, Chrome ZR1 Rims, SS Hood Scoop/Spoiler

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2LT exhaust options	Guardian1816	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	3	01-12-2010 09:28 PM
Suggestion: Explanation to thread starters for their threads being locked?	colin911	Site Related Announcements / Suggestions / Feedback / Questions	2	12-06-2009 10:25 PM
Dealer Praise Thread (Not an Idiot!)	RPO_Z28	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	84	06-25-2009 01:00 AM
prices thread	nimnels	5th Gen Camaro SS LS LT General Discussions	1	05-02-2009 06:47 PM