HEADERS PLUS BORLA EXHAUST!..Feedback PLEASE! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Gi0vanni2ss · 02-26-2014, 01:33 PM

Hi guys!

I have a 2010 ss......I'm ready to get my full set up BORLA ATAK EXHAUST!...

I'm not sure on what Stainless steel LONGTUBE headers to go with.. i know headers is not something to be cheap with, but I'm just trying to get a good bang for my buck!

feedback, comments?....anything?

THANK YOU! :-)

rebelyell22 · 02-26-2014, 01:37 PM

It's going to be loud as hell. Kooks ans Stainless Works are always good

Squillo · 02-26-2014, 01:43 PM

Can't go wrong with Kooks. Check with www.marylandspeed.com. I got a really great deal from them.

You might want to call and talk to someone instead of just ordering from the online store. I got the Kooks 1 7/8" headers and mid pipes shipped to Hawaii for only $1,000.

Mannsiam · 02-26-2014, 01:49 PM

There are like 15 threads on this. I found it best to youtube videos and listen to see which combo I liked. I am ordering Kooks with green cats with the ATAK

Mid Life · 02-26-2014, 01:49 PM

I recently had Phadt Tri-y headers installed on my 2011 SS with high flow Cats and Borla S-type. I love it. Unfortunately Phadt just went out of business. I'm sure you could still find them around and they make a high quality product. it appears they went out of business because they didn't have the capitol to keep up with the rate at which their business was growing.

Gi0vanni2ss · 02-26-2014, 01:50 PM

Thank you so much guys!!....You think the ATAKS are that loud HUH???

Mid Life · 02-26-2014, 01:53 PM

Quote:

Originally Posted by Gi0vanni2ss

Thank you so much guys!!....You think the ATAKS are that loud HUH???

I went with the S-Type because I was worried about pissing off my neighbors and I was warned by someone that the ATAK were very loud with Long Tubes. I'm happy with the S-Type but Borla has some pretty good videos for comparison on their website.

Mid Life · 02-26-2014, 01:55 PM

Quote:

Originally Posted by Gi0vanni2ss

Thank you so much guys!!....You think the ATAKS are that loud HUH???

Just a side note, even with the S-Type, the alarm on my Tahoe goes off if I back out of the garage next to it.

ABMLS3 · 02-26-2014, 02:27 PM

I have borla atak cat back with stainless power headers. Sounds amazing and I'll be selling my headers soon becauE I'm getting turbos put on

Eddiefuzz · 02-26-2014, 02:36 PM

Amazon has the Borla ZL1 catback with the quad exhaust tips for $1400. If your going for Borla the Quad tips look AMAZING!!!

Apex Motorsports · 02-26-2014, 02:46 PM

Quote:

Originally Posted by Gi0vanni2ss

Hi guys!

I have a 2010 ss......I'm ready to get my full set up BORLA ATAK EXHAUST!...

I'm not sure on what Stainless steel LONGTUBE headers to go with.. i know headers is not something to be cheap with, but I'm just trying to get a good bang for my buck!

feedback, comments?....anything?

THANK YOU! :-)

You can't go wrong with any of the top tier brands; Stainless Works, Kook, and ARH are all outstanding. But if bang for your buck is what you are looking for I would recommend Stainless Power. For the money you will not find a better header and the cost $400-500 less than the others. Here is what they sound like with the Borla ATAK.

No cats

High flow cats

Sapper12b · 02-26-2014, 03:00 PM

My buddy has the Borla ATAK on his mustang with headers and that thing is LOUD! I can hear him coming down the street at least 2 blocks away, cant even have a conversation in the car when he guns it.

DEANGE2001 · 02-26-2014, 03:19 PM

I went with kooks 1 7/8 LTs and borla s-type axle back...sounds pretty beastly but is not overly loud....

depending on where you live it might be worth considering looking into the s-type over atak (although atak does sound incredible)...

also keep in mind drone - atak has a lot of drone.

im getting all antsy in my pantys to get my camaro out of winter storage...only a few more weeks!

2ndtimess · 02-26-2014, 03:32 PM

I went with American Racing Headers and High Flo Cats already had the Borla ATAK and it is loud. But when you first start it up it will be loud but if you go easy on the gas it does quiet down until you get on it. I love the sound when I punch it. will turn a lot of heads when you do get on it!!

02-26-2014, 01:33 PM	#1
Gi0vanni2ss Drives: 2010 2ss Camaro Join Date: Feb 2011 Location: New York Posts: 49	HEADERS PLUS BORLA EXHAUST!..Feedback PLEASE! Hi guys! I have a 2010 ss......I'm ready to get my full set up BORLA ATAK EXHAUST!... I'm not sure on what Stainless steel LONGTUBE headers to go with.. i know headers is not something to be cheap with, but I'm just trying to get a good bang for my buck! feedback, comments?....anything? THANK YOU! :-) Attached Images

02-26-2014, 01:37 PM	#2
rebelyell22 Drives: 2011 SIM 2SS/RS LS3 Join Date: Sep 2013 Location: Tupelo, MS Posts: 5,902	It's going to be loud as hell. Kooks ans Stainless Works are always good __________________ 2011 2SS/RS built 8/24/10

02-26-2014, 01:49 PM	#4
Mannsiam Drives: 2014 Camaro 1SS/RS 1LE Join Date: Oct 2013 Location: Wisconsin Posts: 441 View My Garage	There are like 15 threads on this. I found it best to youtube videos and listen to see which combo I liked. I am ordering Kooks with green cats with the ATAK __________________ Yeah Im a Chevy Guy. 11 Silverado, 12 Malibu, 14 Camaro 1LE

02-26-2014, 01:49 PM	#5
Mid Life Drives: 2011 2SS/RS Join Date: Mar 2013 Location: Arizona Posts: 56 View My Garage	Phadt I recently had Phadt Tri-y headers installed on my 2011 SS with high flow Cats and Borla S-type. I love it. Unfortunately Phadt just went out of business. I'm sure you could still find them around and they make a high quality product. it appears they went out of business because they didn't have the capitol to keep up with the rate at which their business was growing. Attached Images

02-26-2014, 02:27 PM	#9
ABMLS3 Drives: 2010 Aqua Blue Camaro 2SS/RS Join Date: May 2013 Location: Long Island NY Posts: 657	I have borla atak cat back with stainless power headers. Sounds amazing and I'll be selling my headers soon becauE I'm getting turbos put on __________________ Power Source Performance Turbo Kit 416 C.I ,TH400 Instagram: TomTraube COTW ABMLS3 Build Thread

02-26-2014, 01:43 PM	#3
Squillo Drives: 2013 Camaro 2SS/RS BRM LS3 Join Date: Jan 2013 Location: Hawaii Posts: 1,174	Can't go wrong with Kooks. Check with www.marylandspeed.com. I got a really great deal from them. You might want to call and talk to someone instead of just ordering from the online store. I got the Kooks 1 7/8" headers and mid pipes shipped to Hawaii for only $1,000.

02-26-2014, 01:50 PM	#6
Gi0vanni2ss Drives: 2010 2ss Camaro Join Date: Feb 2011 Location: New York Posts: 49	Thank you so much guys!!....You think the ATAKS are that loud HUH???

02-26-2014, 02:36 PM	#10
Eddiefuzz Drives: 2011 RS Join Date: Apr 2011 Location: Florence New Jersey Posts: 1,125	Amazon has the Borla ZL1 catback with the quad exhaust tips for $1400. If your going for Borla the Quad tips look AMAZING!!!

02-26-2014, 03:00 PM	#12
Sapper12b HTCC Member Drives: 2013 Camaro SS Join Date: Dec 2012 Location: Houston, Texas Posts: 1,868 View My Garage	My buddy has the Borla ATAK on his mustang with headers and that thing is LOUD! I can hear him coming down the street at least 2 blocks away, cant even have a conversation in the car when he guns it. __________________

02-26-2014, 03:19 PM	#13
DEANGE2001 Drives: 2010 2ss LSR CAI, Borla S axle back Join Date: Apr 2011 Location: Rochester, NY Posts: 208 View My Garage	I went with kooks 1 7/8 LTs and borla s-type axle back...sounds pretty beastly but is not overly loud.... depending on where you live it might be worth considering looking into the s-type over atak (although atak does sound incredible)... also keep in mind drone - atak has a lot of drone. im getting all antsy in my pantys to get my camaro out of winter storage...only a few more weeks! __________________ 2010 2SS (Red w/ White Stripes) LSR CAI, Kooks 1 7/8 LTs with Cats, Borla S-type Axle-back Exhaust and Tune "cmon, the engine has all forged internals...its just begging to be blown"

02-26-2014, 03:32 PM	#14
2ndtimess 2ndtimeSS Drives: 2010 2SS 6 speed Infernal Orange Join Date: Aug 2010 Location: Middleboro Ma Posts: 185 View My Garage	I went with American Racing Headers and High Flo Cats already had the Borla ATAK and it is loud. But when you first start it up it will be loud but if you go easy on the gas it does quiet down until you get on it. I love the sound when I punch it. will turn a lot of heads when you do get on it!! __________________