09-17-2014, 12:08 PM | #1 |
Drives: 2010, 2000, 1971 Camaros Join Date: May 2010
Location: Hawaii
Posts: 535
|
18 inch square set-up for AutoX
Can anyone who is running an 18 inch square set-up provide me the offset and rim style that can clear the stock Brembo's or other confirmed BBK fitments? I have the Stop Tech BBK's so I'm hoping they are similar in size. I would prefer 18x9.5 to 10.5. Main reason for the 18's is so I can use hand me downs from my primary AutoX car (my son should be the primary driver of the Camaro).
I've searched and did not find anything specific other than it appears a couple of guys have an 18 inch set-up. I also PM'd a couple of vendors but they haven't came back with any answers/options after providing them with the specific dimensions of the StopTech BBK's so I thought I would check here. I assume the TSW or Forgestar would fit my needs but just want to make sure. Thanks! |
09-17-2014, 01:44 PM | #2 |
Casey Woodside
Drives: a very fun car Join Date: Jun 2010
Location: Tn
Posts: 1,906
|
It should fit the fronts I had a set of 18x9.5. I had to replace the front brake pads because of the weights that where on the pads
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w |
09-17-2014, 03:59 PM | #3 |
Drives: 2010, 2000, 1971 Camaros Join Date: May 2010
Location: Hawaii
Posts: 535
|
What offset and or rims did you use? Did you run square?
|
09-18-2014, 10:32 AM | #4 |
Casey Woodside
Drives: a very fun car Join Date: Jun 2010
Location: Tn
Posts: 1,906
|
it is a forgestar 18x9.5 fronts and 18x10.5 rear. No it is not a squared set up i use it on the streets
i have a set of forgeline 19"x10.5 that i use for autocross
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w |
09-18-2014, 05:49 PM | #5 |
Drives: 2010, 2000, 1971 Camaros Join Date: May 2010
Location: Hawaii
Posts: 535
|
|
09-22-2014, 03:27 AM | #6 | |
Drives: 2010 SS RS Join Date: Apr 2009
Location: Honolulu, Hawaii
Posts: 930
|
Z,
Jon at CCWheels stuck 18x10.5 on a SS rental at Camarofest 1 and it ran AutoX. Had hoosiers and stuck out, but worked well for a stock SS. Not cheap since 1-piece billet. Can call to find out offsets. Here's the pic of the car. Need to see your car around. Alex and I are lonely in Street Mod. I still got my Pedders 32mm rear SwaybarC laying around if you're interested. |
|
09-23-2014, 02:28 AM | #7 |
Drives: 2010, 2000, 1971 Camaros Join Date: May 2010
Location: Hawaii
Posts: 535
|
I think I found some Forgestars in 18's. My son should be out there soon, I may run it a couple of times too. Hope we add CAM class next season.
|
09-23-2014, 03:29 AM | #8 |
Drives: 2010 SS RS Join Date: Apr 2009
Location: Honolulu, Hawaii
Posts: 930
|
I want to verify if CAM is a go for next season. If so, want to use up my R888 and try Rivals or R-S3 V2s. PAX would probably still suck. See you Sunday.
|
|
|
|
|