FOUND AND BOUGHT! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Macfolk · 04-19-2014, 09:01 PM

2012+ SS or ZL1 endlinks wanted, local preferred if possible.

I have the ZL1 sways and rear LCAs, but I need the endlinks to complete my install.

Does anyone have GM ones they are not using after an upgrade? I am purely street for the most part, so this will work for me.

UPDATE: I found and bought both front and rears from members on C5. Greatest forum EVER.

Thanks all,

Jason

Bulldogge · 04-20-2014, 05:19 AM

Quote:

Originally Posted by Macfolk

2012+ SS or ZL1 endlinks wanted, local preferred if possible.

I have the ZL1 sways and rear LCAs, but I need the endlinks to complete my install.

Does anyone have GM ones they are not using after an upgrade? I am purely street for the most part, so this will work for me.

Thanks all,

Jason

I have rears I'm not using. I was going the ZL1 route, but decided on LSR Sway bars which have their own rear links.

My GM rear links are brand new, never used, bushings included. BUT I did paint them red.

I bought them for $40. I'll ship them to you for $30 if you want them.

Let me know and they're yours.

- Matthew

Sent from my SCH-I535 using Tapatalk

Macfolk · 04-20-2014, 07:26 AM

Sounds good. I will PM you.

Jason

Bulldogge · 04-20-2014, 08:34 AM

I can paint them flat, satin, gloss, or textured black. I also have plastic dip and truck liner if you don't like the red.

Sent from my SCH-I535 using Tapatalk

Macfolk · 04-20-2014, 08:43 AM

The red looks fine. It's all fully finished paint wise. Right? Could you PM me your paypal? These are 2012+. Right?

Thanks again!

Jason

bannonm · 04-20-2014, 08:53 AM

I have a new set of ZL1 front end links. I need to find them first though, in the process of building a new house and all my stuff is in storage. I'll check today.

As for your question to BullDogee about the rear end links, those are want you want. They only make one type for the FE4/FE5 suspension.

Macfolk · 04-20-2014, 08:54 AM

Quote:

Originally Posted by bannonm

I have a new set of ZL1 front end links. I need to find them first though, in the process of building a new house and all my stuff is in storage. I'll check today.

As for your question to BullDogee about the rear end links, those are want you want. They only make one type for the FE4/FE5 suspension.

Perfect. Thanks!

Good luck on the move.

I appreciate it. C5 rocks!

Jason

bannonm · 04-20-2014, 05:49 PM

Quote:

Originally Posted by Macfolk

Perfect. Thanks!

Good luck on the move.

I appreciate it. C5 rocks!

Jason

Sending a PM, found them.

Nighthawk89 · 04-20-2014, 11:39 PM

Hey you guys, How much am i looking at to convert into the FE4 setup to get some BMR sways in there? What parts do i need exactly?

Bulldogge · 04-21-2014, 05:25 AM

Quote:

Originally Posted by Nighthawk89

Hey you guys, How much am i looking at to convert into the FE4 setup to get some BMR sways in there? What parts do i need exactly?

These are just rough estimates. If you shop around for some used parts, this can be cheaper.

Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 cars for sway bar conversion) - $40/each

Front Sway End Link (passenger side) - 22842515 - $35

Front Sway End Link (driver side) - 22842516 - $35

Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221 - $20/each

So converting over to an FE4 setup from an FE2/FE3 would run you about $200 (give or take a few $) + your choice of sway bars

Nighthawk89 · 04-21-2014, 12:17 PM

Quote:

Originally Posted by Bulldogge

These are just rough estimates. If you shop around for some used parts, this can be cheaper.

Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 cars for sway bar conversion) - $40/each

Front Sway End Link (passenger side) - 22842515 - $35

Front Sway End Link (driver side) - 22842516 - $35

Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221 - $20/each

So converting over to an FE4 setup from an FE2/FE3 would run you about $200 (give or take a few $) + your choice of sway bars

I appreciate it! I wasn't sure exactly and the parts numbers deff help out a bunch! Im going to see what i can get my hands on.

https://secure.gmpartsdirect.com/secure/signIn.2.cfm

How about just going thru GMPartsDirect?
It came to 185 shipped

The Blue Ox · 04-21-2014, 12:44 PM

Quote:

Originally Posted by Bulldogge

These are just rough estimates. If you shop around for some used parts, this can be cheaper.

Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 cars for sway bar conversion) - $40/each

Front Sway End Link (passenger side) - 22842515 - $35

Front Sway End Link (driver side) - 22842516 - $35

Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221 - $20/each

So converting over to an FE4 setup from an FE2/FE3 would run you about $200 (give or take a few $) + your choice of sway bars

Glad you posted this info!

bannonm · 04-21-2014, 08:09 PM

Quote:

Originally Posted by The Blue Ox

Glad you posted this info!

Check Partstaxi.com. When I bought my stuff it was cheaper than mentioned above and that's with factoring shipping.

The Blue Ox · 05-01-2014, 11:41 AM

Thanks Bud!

04-19-2014, 09:01 PM	#1
Macfolk J.T. Drives: Camaro 2SS w/RS package, Imp. Blue Join Date: Jan 2012 Location: Sarasota, FL Posts: 441 View My Garage	FOUND AND BOUGHT! 2012+ SS or ZL1 endlinks wanted, local preferred if possible. I have the ZL1 sways and rear LCAs, but I need the endlinks to complete my install. Does anyone have GM ones they are not using after an upgrade? I am purely street for the most part, so this will work for me. UPDATE: I found and bought both front and rears from members on C5. Greatest forum EVER. Thanks all, Jason __________________ 2011 Camaro 2SS/RS L99 Mods done: 1LE replica wheels, black tail light bezels, LED driving lights (spliced to running lights), VMax CNC ported TB, No tune Vararam, and Rx catch can Mods planned: heritage grille, 1LE splitter, led signals, tune, and possibly LT Headers Love this car! Last edited by Macfolk; 04-21-2014 at 04:55 PM. Reason: Found item.

04-20-2014, 07:26 AM	#3
Macfolk J.T. Drives: Camaro 2SS w/RS package, Imp. Blue Join Date: Jan 2012 Location: Sarasota, FL Posts: 441 View My Garage	Sounds good. I will PM you. Jason __________________ 2011 Camaro 2SS/RS L99 Mods done: 1LE replica wheels, black tail light bezels, LED driving lights (spliced to running lights), VMax CNC ported TB, No tune Vararam, and Rx catch can Mods planned: heritage grille, 1LE splitter, led signals, tune, and possibly LT Headers Love this car!

04-20-2014, 08:34 AM	#4
Bulldogge Drives: 2011 2SS/RS CGM Join Date: Dec 2012 Location: Fort Worth, TX Posts: 84	I can paint them flat, satin, gloss, or textured black. I also have plastic dip and truck liner if you don't like the red. Sent from my SCH-I535 using Tapatalk __________________ Too many mods... Or perhaps not enough. Just one more.

04-20-2014, 08:43 AM	#5
Macfolk J.T. Drives: Camaro 2SS w/RS package, Imp. Blue Join Date: Jan 2012 Location: Sarasota, FL Posts: 441 View My Garage	The red looks fine. It's all fully finished paint wise. Right? Could you PM me your paypal? These are 2012+. Right? Thanks again! Jason __________________ 2011 Camaro 2SS/RS L99 Mods done: 1LE replica wheels, black tail light bezels, LED driving lights (spliced to running lights), VMax CNC ported TB, No tune Vararam, and Rx catch can Mods planned: heritage grille, 1LE splitter, led signals, tune, and possibly LT Headers Love this car!

04-20-2014, 08:53 AM	#6
bannonm Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011 Location: Chicagoland Posts: 1,536	I have a new set of ZL1 front end links. I need to find them first though, in the process of building a new house and all my stuff is in storage. I'll check today. As for your question to BullDogee about the rear end links, those are want you want. They only make one type for the FE4/FE5 suspension. __________________

04-20-2014, 11:39 PM	#9
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	Hey you guys, How much am i looking at to convert into the FE4 setup to get some BMR sways in there? What parts do i need exactly?

05-01-2014, 11:41 AM	#14
The Blue Ox Drives: 2010 SS L99 Inferno Orange Join Date: Apr 2012 Location: Texas Coast Posts: 1,167	Thanks Bud!