*RELEASE* LG Motorsports Mono Ball Control Arm kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Anthony @ LG Motorsports · 01-02-2014, 01:38 PM

LG Motorsports brings total suspension control to your Gen5 Camaro with their mono ball control arm package.

As found on our winning race cars, these spherical bearings come complete with all housings and spacers needed to replace the sloppy and weak rubber bushings found on your stock Camaro. Using spherical bearings in the control arms will maintain your alignment settings, remove any and all deflection from the control arm bushings giving you a positive feel on the road. Removing deflection will also reduce or eliminate wheel hop problems that can so badly plague the new Camaro's.

Bearings are a high quality, Teflon lined unit for long lasting quiet performance. Housings are either made from lightweight machined aluminum or high strength steel depending on location. Kit also includes lightweight aluminum rear adjustable toe rods.

Full package includes:

-Front control arms with bearings and spacers
-Front radius arms with bearings and spacers
-Rear lower control arms with bearings and spacers
-Rear upper control arm forward bushings
-Rear adjustable toe rod with hardware
-Rear trailing link with bearings and spacers

Kits can be had as a DYI kit and you install into your own arms, you can send your arms in for the install, or lastly you can purchase the entire kit installed into new GM arms ready to bolt into your Camaro.

Shown here on a Corvette you can see just how much the rubber bushings can move under even a light load like the dyno.

Dexman1349 · 01-02-2014, 01:51 PM

If you order the kit installed into new GM arms, would that come with a core charge where we can send back our existing arms?

Anthony @ LG Motorsports · 01-02-2014, 02:15 PM

Quote:

Originally Posted by Dexman1349

If you order the kit installed into new GM arms, would that come with a core charge where we can send back our existing arms?

Depends, on the Corvette kits we do offer an exchange program. If your arms come back in usable shape then we can do it on a core exchange. If you wanted brand new arms specific then there might be a slight cost involved. Luckily the stock arms are not that expensive on the Camaro's.

olblue75 · 01-02-2014, 05:32 PM

Can you PM me a price on a set of the FE4 an up LCAs doing 1LE bar swap on my 10SS

Anthony @ LG Motorsports · 01-03-2014, 11:12 AM

PM's sent

Splat · 01-03-2014, 11:30 AM

Could you pm me a price on a full kit, 2012 SS.

jamesc1123 · 01-04-2014, 09:45 PM

PM prices on a full kit and the DIY Kit please.

gmdoctor · 01-05-2014, 04:48 PM

Pm prices here as well. Full kit and diy

Thanks

Anthony @ LG Motorsports · 01-07-2014, 12:44 PM

Pricing coming shortly!

Cornercarver · 12-31-2017, 01:12 PM

Did this ever happen? I don’t see them on your website?

01-02-2014, 01:38 PM	#1
Anthony @ LG Motorsports Drives: 1994 1LE / 2006 Z51 Corvette Join Date: Jul 2009 Location: Plano, TX Posts: 2,829	RELEASE LG Motorsports Mono Ball Control Arm kit LG Motorsports brings total suspension control to your Gen5 Camaro with their mono ball control arm package. As found on our winning race cars, these spherical bearings come complete with all housings and spacers needed to replace the sloppy and weak rubber bushings found on your stock Camaro. Using spherical bearings in the control arms will maintain your alignment settings, remove any and all deflection from the control arm bushings giving you a positive feel on the road. Removing deflection will also reduce or eliminate wheel hop problems that can so badly plague the new Camaro's. Bearings are a high quality, Teflon lined unit for long lasting quiet performance. Housings are either made from lightweight machined aluminum or high strength steel depending on location. Kit also includes lightweight aluminum rear adjustable toe rods. Full package includes: -Front control arms with bearings and spacers -Front radius arms with bearings and spacers -Rear lower control arms with bearings and spacers -Rear upper control arm forward bushings -Rear adjustable toe rod with hardware -Rear trailing link with bearings and spacers Kits can be had as a DYI kit and you install into your own arms, you can send your arms in for the install, or lastly you can purchase the entire kit installed into new GM arms ready to bolt into your Camaro. Shown here on a Corvette you can see just how much the rubber bushings can move under even a light load like the dyno.

01-02-2014, 01:51 PM	#2
Dexman1349 2010 2SS/RS M6 Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: Auckland, NZ Posts: 1,482	If you order the kit installed into new GM arms, would that come with a core charge where we can send back our existing arms? __________________ 2/7/2014: 419 hp, 419 tq Cosmetic: ZL1 front w/mailslot, painted stripes, powdercoated SS rims, tow hook, and full chrome delete Suspension: Pfadt subframe bushings, Pfadt rear UCA bushings, Z28 Upper control arms, Spohn trailing arms with BMR trailing arm & differential bushings, ZL1 Toe Rods and springs, Prothane radius arm inserts & steering rack bushing, Pfadt Sport front sway, FE4 conversion w/ DS rear sway, Pfadt strut brace Drivetrain: RMCR tune, CAI intake, Kooks headers, hi-flo cats & exhaust, VMAX TB, ZL1 fuel pump, LSR Tri-Ax shifter Bumblebee Racecar Build

01-04-2014, 09:45 PM	#7
jamesc1123 Drives: CGM 2SS RS w/ white stripes Join Date: Jul 2008 Location: Clarksville, TN Posts: 183 View My Garage	PM prices on a full kit and the DIY Kit please. __________________ LGM G6X3 cam, LGM headers, Vararam intake, throttle body and intake ported by ADM Performance, 477 hp 454 ft-lb tq, tuned by PCMforLess

01-02-2014, 05:32 PM	#4
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Can you PM me a price on a set of the FE4 an up LCAs doing 1LE bar swap on my 10SS

01-03-2014, 11:12 AM	#5
Anthony @ LG Motorsports Drives: 1994 1LE / 2006 Z51 Corvette Join Date: Jul 2009 Location: Plano, TX Posts: 2,829	PM's sent

01-03-2014, 11:30 AM	#6
Splat Drives: 2012 1SS M6 IOM Join Date: Dec 2012 Location: New Rochelle New York Posts: 1,428 View My Garage	Could you pm me a price on a full kit, 2012 SS.

01-05-2014, 04:48 PM	#8
gmdoctor Drives: ZL1 Join Date: Sep 2013 Location: GTA Posts: 39	Pm prices here as well. Full kit and diy Thanks

01-07-2014, 12:44 PM	#9
Anthony @ LG Motorsports Drives: 1994 1LE / 2006 Z51 Corvette Join Date: Jul 2009 Location: Plano, TX Posts: 2,829	Pricing coming shortly!

12-31-2017, 01:12 PM	#10
Cornercarver Account Suspended Drives: 2011 2SS/RS M6 Join Date: Feb 2015 Location: Kansas City Posts: 83 View My Garage	Did this ever happen? I don’t see them on your website?