07-05-2014, 01:29 PM | #1 |
Painted Calipers
Anyone here painted their calipers? What's the easiest way to do it and what did you use? Any problems after?
|
|
07-05-2014, 01:38 PM | #2 |
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
I went cheap.
Take them off, plug the bleeders, and shoot them with a few coats of rattle can red. Looks great after almost 2 years. Mine is a daily driver, so powder coating was wasted money. Other cars, I have taken the caliper off, placed a towel over the rotor, and set the caliper back on. Then painted it. It will cover all the visible parts, and give you the same basic look without having to bleed the brakes.
__________________
|
07-05-2014, 01:44 PM | #3 |
Account Suspended
Drives: 2019 Dodge Challenger Scat Pack Join Date: Apr 2014
Location: Frederick, Colorado
Posts: 1,245
|
This is my next mod too. I'm going to use caliper paint as the other poster said.
|
07-05-2014, 01:55 PM | #4 |
Well, I have some VHT red caliper paint to match the color scheme of my car, I was planning on taking off my wheels, and then covering up the rotors with plastic bags or something and then spraying my calipers. I also have some black Brembo caliper decals coming in as well to place on them. The reason I'm asking this is because my dad is saying it would mess something up and fade away with the heat from the calipers.
|
|
07-05-2014, 02:01 PM | #5 |
Pull up Cougar!
Drives: 2016 2SS Join Date: Jul 2011
Location: San Diego
Posts: 2,875
|
G2 caliper paint or mikethepowdercoater if you have the money.
|
07-05-2014, 02:04 PM | #6 | |
Account Suspended
Drives: 2019 Dodge Challenger Scat Pack Join Date: Apr 2014
Location: Frederick, Colorado
Posts: 1,245
|
Quote:
|
|
07-05-2014, 02:36 PM | #7 |
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
Any high heat spray paint will work also. It may not last forever, but what really does?
__________________
|
07-05-2014, 03:35 PM | #8 |
Drives: 2013 Camaro RS 1LT, 6M Join Date: Jan 2013
Location: Albany, OR
Posts: 603
|
Use G2 Caliper paint. It's not that much considering you spent thousands on your ride. Easy to use and looks great and last a life time. Gave me enough to coat all calipers 4-5 times. I put on four coats and still had plenty to do another coat or two but decided four was enough. Didn't take calipers off just masked the rotors and other things I didn't want paint to be.
__________________
|
07-05-2014, 03:42 PM | #9 | |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
Quote:
|
|
07-05-2014, 04:51 PM | #10 |
+1 For G2 paint. Great product, 100% satisfied.
|
|
07-05-2014, 06:11 PM | #11 | |
Quote:
|
||
07-06-2014, 02:00 AM | #12 |
Drives: '14 Red 2SS/RS/LS3 Join Date: Dec 2013
Location: Cedar Rapids, IA
Posts: 692
|
Oh yeah. Here's a step by step to DIY to paint your calipers.
http://www.camaro5.com/forums/showth...ght=DIY+BREMBO
__________________
2014 Red Hot 2SS/RS/M6/NPP/Shifter/Nav/Roof/SilverRallyStripes/Airaid intake/GM StrutTowerBrace/50%-35%tint
Last edited by thkfast; 07-19-2014 at 02:49 AM. |
07-06-2014, 03:06 AM | #13 |
Drives: 2011 Camaro SS Join Date: Jul 2013
Location: Chicago
Posts: 16
|
Another +1 for G2
Sent from my iPad using Tapatalk |
07-06-2014, 04:25 AM | #14 |
Drives: 2014 Camaro 2SS/RS 6MT AGM Join Date: Jun 2013
Location: Göteborg, Sweden
Posts: 318
|
I painted my calipers with a small brush. Think it came out really good. Applied the heat resistant brembo decals also. Paint used, Folia Tec. Really nice 2 comp paint!
__________________
2014 Ashen gray 2SS/RS 6MT, Black rally stripes, Recaros, Sunroof.
Mods: OBX 1.7/8" LT headers, No cats, SW retro chambered cat back, CAI inc cai, JRE Scoop, roto-fab wb relo kit, RX catch can, Vmax ported TB, 1LE steering wheel, 1LE shift knob/boot, SCT tuner, Anthracite plasti dipped wheels, Apex/Pfadt 1.25" lowering springs. |
|
|
|
|