afe Power Solid Subframe Bushings - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Baggerjack · 01-07-2018, 07:58 AM

I picked up a set of these afe power solid subframe bushings for $225 new on Amazon. Thirty minutes after I purchased these the price went up to what is shown now. Now I need to get them installed. Question is what else should I replace while doing this work. It was recommended that I get a set of Z28 upper rear control arm bushing and replace them at the same time. Looking for suggestions. Appreciate all advice!

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

mf1ve · 01-07-2018, 09:16 AM

Wow, you got a killer deal there. New price is more than 2X? Wow.

Burt · 01-07-2018, 10:15 AM

I would do the upper control arm bushings, then seem like a nightmare to get to. It you don't already have upgraded toe links, those require the rear subframe to be loosened up as well.

frankwjr · 01-07-2018, 10:44 AM

stop any hop before it starts...T/A's...

01-07-2018, 07:58 AM	#1
Baggerjack Drives: 2014 Camaro 2SS/RS/1LE Join Date: Oct 2013 Location: Charles Town, WV Posts: 188	afe Power Solid Subframe Bushings I picked up a set of these afe power solid subframe bushings for $225 new on Amazon. Thirty minutes after I purchased these the price went up to what is shown now. Now I need to get them installed. Question is what else should I replace while doing this work. It was recommended that I get a set of Z28 upper rear control arm bushing and replace them at the same time. Looking for suggestions. Appreciate all advice! https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 __________________ Crystal Red Tintcoat, NPP, Recaro Seats, Sunroof and SLP Skip Shift, ZL1 rockers, TSP Stage 4 "F35" cam, PRC 260cc heads, GPI radically ported LS3 Intake, K&N CAI and JDP Motorsports Stage 2 Clutch Reservoir Kit, TSP Longtubes, off road connectors and high flow cats, aFe POWER Solid Subframe mounts, Brembo 6 piston calipers and two piece rotors Last edited by Baggerjack; 01-07-2018 at 03:54 PM.

01-07-2018, 10:15 AM	#3
Burt Cone Killer Drives: 2012 SS Join Date: Dec 2013 Location: St. Albans, West Virginia Posts: 832	I would do the upper control arm bushings, then seem like a nightmare to get to. It you don't already have upgraded toe links, those require the rear subframe to be loosened up as well. __________________ 2012 Camaro SS - Sold Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out!

01-07-2018, 10:44 AM	#4
frankwjr Drives: 2010 SS 2SS M6 Join Date: Aug 2016 Location: Smithsburg, Md. Posts: 2,445	stop any hop before it starts...T/A's... __________________ 2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - *150K!* - All work by me...

01-07-2018, 09:16 AM	#2
mf1ve Drives: 2013 Camaro 1SS Join Date: Oct 2017 Location: Huntsville, AL Posts: 17	Wow, you got a killer deal there. New price is more than 2X? Wow.