Anyone installed Gauge Pack In Canada? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mcnamee · 03-25-2010, 08:20 AM

Part says not for use with KM/H Speedo, has anyone installed this with the KM/H speedo with no problems? part number 92247187. Thanks

chozn4service · 03-25-2010, 08:56 AM

I personally can't answer your particular question though I Have installed the gauge pack on my C5 and it's nice to have!

I would suggest you contact CLaurenson@ChevyPartsPlus.com and Cary Laurenson is your contact person. Let him know what you have and I'm sure he can direct you with the proper part for your car. The install is basic and Plug & Play so I would think it's just a matter of unplugging the harness in the console that runs along the inside of it by the gear shift and putting the gauge harness in between the two original plugs and running the gauge connector to the back of the pack and plugging it in. I'm sure they have these packs for Canadian cars and they should be set up to read in metric. Just plug & play and roll, but contact Cary. He's real good about getting back to you and is very knowledgeable.

Mcnamee · 03-25-2010, 10:45 AM

Thanks for the reply, I do prefer the imperial gauges over the metric ones that's why I'm curious if it'll work with a Canadian car

nighthitcher · 04-03-2010, 07:09 AM

sounds good to me

03-25-2010, 08:20 AM	#1
Mcnamee Drives: 2010 Camaro Synergy & '87 Monte SS Join Date: Sep 2008 Location: Oshawa Ontario Canada Posts: 108	Anyone installed Gauge Pack In Canada? Part says not for use with KM/H Speedo, has anyone installed this with the KM/H speedo with no problems? part number 92247187. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New item - Auto Meter ecometer fuel mileage gauge - plug and play @ PFYC.com	Redshift	Audio / Visual / Electronics/ Gauges / Nav	0	07-01-2009 08:56 AM
Detroit Three seek $6.8 billion from Canada, Ontario	DGthe3	General Automotive + Other Cars Discussion	5	12-08-2008 07:55 PM
Sold ordrs available in Canada on the 16.	Jamestwilliams	Canada	10	10-16-2008 07:51 PM

03-25-2010, 08:56 AM	#2
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	I personally can't answer your particular question though I Have installed the gauge pack on my C5 and it's nice to have! I would suggest you contact CLaurenson@ChevyPartsPlus.com and Cary Laurenson is your contact person. Let him know what you have and I'm sure he can direct you with the proper part for your car. The install is basic and Plug & Play so I would think it's just a matter of unplugging the harness in the console that runs along the inside of it by the gear shift and putting the gauge harness in between the two original plugs and running the gauge connector to the back of the pack and plugging it in. I'm sure they have these packs for Canadian cars and they should be set up to read in metric. Just plug & play and roll, but contact Cary. He's real good about getting back to you and is very knowledgeable.

03-25-2010, 10:45 AM	#3
Mcnamee Drives: 2010 Camaro Synergy & '87 Monte SS Join Date: Sep 2008 Location: Oshawa Ontario Canada Posts: 108	Thanks for the reply, I do prefer the imperial gauges over the metric ones that's why I'm curious if it'll work with a Canadian car

04-03-2010, 07:09 AM	#4
nighthitcher Banned Drives: later Join Date: Apr 2010 Location: usa Posts: 1	sounds good to me