You are browsing camaro5 
 |
|
06-09-2011, 07:55 PM
|
#1 | ||
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
***ETMC CAM IDLE CLIPS AND RESULTS THREAD***
We have had GREAT success with our new cams over the last couple of years. We are ALWAYS having people ask for clips of idle so i just though i would make a thread so it makes it easy for people to find them.
Here is our NA/NITROUS cam This cam has Huge gains over stock. You will need atleast a 3200 stall with it. AND OF COURSE a DYNO vid of it in action! GO TO 44 SEC in to see the dyno run and DYNO graphs of NA with the cam and the SPRAY numbers Here is our stg 2 cam in a 2010 camaro ls3 car there is a clip of this on you tub somewhere in a ls2 gto wit a maggie also ill see if i can find it. this cam will need a 3200-3600 stall if you a auto. has GREAT manners above 1200 rpm Good Big DD cam. stg2 FI cam clip: [u2b]-ps_AmOq1nI[/u2bl] Here is our STG 1 FI cam through a Bassani cat back We also have lots of Dyno vids of these cam and results if anyone wants them. RIPPER CAM another stg 2 clip: |
||
|
|
|
06-09-2011, 10:34 PM
|
#2 |
  
Drives: 2010 2ss/rs M6 Join Date: Nov 2010
Location: Il
Posts: 931
|
Orange one sounds good. Nice smooth idle at 875.
|
|
|
|
|
06-10-2011, 12:09 AM
|
#3 |
|
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
HP numbers??
__________________
Sold: Blk/Blk 2010 SS M6 - Speed Inc SI5V2 Cam & Tune, TSP Underdrive balancer, XS Power LTs, XS 3" Exhaust, Roto-Fab Intake, BMR 1" Drop Springs, and more. Only 5600 miles!
|
|
|
|
|
06-10-2011, 02:37 AM
|
#4 |
 Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011
Location: Sulphur Springs, TX
Posts: 95
|
Yep the one on the bottom is my red SS. Just completed sounds amazing at 875 rpm idle. Go to east tx muscle cars and they will hook you up.
__________________
ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.
|
|
|
|
|
06-10-2011, 09:28 AM
|
#5 |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
HP numbers on what cam?
|
|
|
|
|
06-10-2011, 09:44 AM
|
#6 | |
|
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
Quote:
__________________
Sold: Blk/Blk 2010 SS M6 - Speed Inc SI5V2 Cam & Tune, TSP Underdrive balancer, XS Power LTs, XS 3" Exhaust, Roto-Fab Intake, BMR 1" Drop Springs, and more. Only 5600 miles!
|
|
|
|
|
|
06-10-2011, 10:57 AM
|
#7 |
|
Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011
Location: Sulphur Springs, TX
Posts: 95
|
Post up the chart. But it's 474 RWHP
__________________
ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.
|
|
|
|
|
06-10-2011, 01:38 PM
|
#8 |
|
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
Wow that is right where I am looking to be at, what are the specs on the cam?
__________________
Sold: Blk/Blk 2010 SS M6 - Speed Inc SI5V2 Cam & Tune, TSP Underdrive balancer, XS Power LTs, XS 3" Exhaust, Roto-Fab Intake, BMR 1" Drop Springs, and more. Only 5600 miles!
|
|
|
|
|
06-11-2011, 09:24 AM
|
#9 |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
here is one we did when it was a little cooler out, not 110* in the dyno bay.lol
Austin's did 474 rwhp. they do 470-485 depending on the car and the other mods |
|
|
|
|
06-11-2011, 09:56 AM
|
#10 | |
|
Show & Go
Drives: '10 Camaro 1SS LS3 Join Date: Apr 2011
Location: Racine,WI
Posts: 239
|
Quote:
__________________
Sold: Blk/Blk 2010 SS M6 - Speed Inc SI5V2 Cam & Tune, TSP Underdrive balancer, XS Power LTs, XS 3" Exhaust, Roto-Fab Intake, BMR 1" Drop Springs, and more. Only 5600 miles!
|
|
|
|
|
|
06-13-2011, 12:02 PM
|
#11 |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
XER lobes
113+2 lsa |
|
|
|
|
06-15-2011, 06:11 PM
|
#12 | |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
Quote:
let me know if you want one! 
|
|
|
|
|
|
07-21-2011, 11:40 AM
|
#13 | |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
Quote:
|
|
|
|
|
|
07-21-2011, 12:55 PM
|
#14 | |
|
**Sold n' Sad**
|
Quote:
please shoot me a pm, im on the fence of which cam to get.
__________________
2011 Camaro 2SS, SIM, 6M, HUD, 10% tint, black out lenses, SS emblems, TSP 304 LT's, Roto-Fab, MGW shifter, gto res, 8K BFXENON, HP Tuners, Redline Fluids. ***Sold*** Now in an 11' F150 supercrew FX4.
Still addicted to the this forum  |
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Should the JRE CAI results be a sticky? | TBone | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 4 | 01-19-2011 08:11 PM |
| DIY V-LEDS 28 LED 5202 Fog Lights High Output! I mean BRIGHT results. | D1BADZ | Camaro DIY & HOW-TO instructions & discussions | 20 | 07-21-2010 01:57 PM |
| Muffler Delete with Dyno clips and pictures | KK2010SS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 9 | 07-26-2009 02:09 PM |
