v6 cammed cars - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chrisco22 · 03-13-2013, 03:53 PM

v6 cammed cars, does anyone have dyno sheets? very curious

simt3k · 03-13-2013, 03:56 PM

Good question, there's another thread but doesn't seem to have definitive numbers....

lscamaro · 03-13-2013, 04:52 PM

There was a 30 hp gain with just cams but no definitive numbers with the rx heads

Chrisco22 · 03-13-2013, 05:08 PM

30 rwhp gain? any dyno sheets to prove this.

kjkjr27 · 03-13-2013, 05:13 PM

If there are any they are in here:
http://www.camaro5.com/forums/showthread.php?t=239911

lscamaro · 03-13-2013, 07:11 PM

Here, found them. The before sheet was done on a different dyno as the after. Just saying

Yellow_Glide · 03-13-2013, 11:02 PM

Keep checking - there are two dynojet sheets done in FL. The autotek sheet you posted is my original baseline from March 2012 done in TX before we started the project.

kuzman89 · 03-14-2013, 01:41 AM

Come on guys get some cams!! I'll be throwing a set in once the tuning for the SC is 100%.

Yellow_Glide · 03-14-2013, 09:34 AM

Quote:

Originally Posted by kuzman89

Come on guys get some cams!! I'll be throwing a set in once the tuning for the SC is 100%.

Hi Kuzman, which sc are you looking at?

kuzman89 · 03-15-2013, 01:09 AM

I've had a Vortech on my car for 8 months lol, by tune 100% I meant back and forth with Steve and Vince. I got another retune today, so hopefully it'll run a bit better now.

Risky guy · 03-15-2013, 01:50 AM

With cams you made 256whp 233tq with cams?
Made 296awhp 292awtq just from a tune.
Not a v6 but, that's the + with turbos.
What was your baseline tune? Or is that your baseline?

lscamaro · 03-15-2013, 03:23 AM

That's the baseline

KMPrenger · 03-15-2013, 10:05 AM

Quote:

Originally Posted by Risky guy

With cams you made 256whp 233tq with cams?
Made 296awhp 292awtq just from a tune.
Not a v6 but, that's the + with turbos.
What was your baseline tune? Or is that your baseline?

Risky....long story short....those are not the numbers you should take away from this.

His car dyno'd 20 - 30 HP more on his local dyno than it did on the RX dyno which reads lower with the exact same mods. (Those numbers above I believe are the original numbers at RX). With the cams alone it gained around 30rwhp on top of that.

But now with the ported heads I don't think the tune has been perfect ever since.

If things get sorted out correctly (I pray they do) we should be seeing well over 300rwhp at peak rpm.

zkdreads · 03-15-2013, 10:09 AM

u can cam a v6?

03-13-2013, 03:53 PM	#1
Chrisco22 Drives: 2011 Chevy Camaro LS Join Date: Feb 2012 Location: United States Posts: 368	v6 cammed cars v6 cammed cars, does anyone have dyno sheets? very curious __________________ 2011 Camaro LS: [Rally Yellow] [22" Status Rims] [BBK Long Tube Headers w/ High Flow Cats] [Trifecta Tune] [K&N CAI] [Blacked out Bow Ties and Tail Lights] [15% Tint] [MAC Mufflers] [Rear Cat Delete] [Vmax Black Ice]

03-13-2013, 04:52 PM	#3
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	There was a 30 hp gain with just cams but no definitive numbers with the rx heads __________________ Click Picture for Build Thread

03-13-2013, 05:08 PM	#4
Chrisco22 Drives: 2011 Chevy Camaro LS Join Date: Feb 2012 Location: United States Posts: 368	30 rwhp gain? any dyno sheets to prove this. __________________ 2011 Camaro LS: [Rally Yellow] [22" Status Rims] [BBK Long Tube Headers w/ High Flow Cats] [Trifecta Tune] [K&N CAI] [Blacked out Bow Ties and Tail Lights] [15% Tint] [MAC Mufflers] [Rear Cat Delete] [Vmax Black Ice]

03-13-2013, 05:13 PM	#5
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	If there are any they are in here: http://www.camaro5.com/forums/showthread.php?t=239911 __________________ Twitch Youtube

03-13-2013, 07:11 PM	#6
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Here, found them. The before sheet was done on a different dyno as the after. Just saying Attached Images __________________ Click Picture for Build Thread

03-13-2013, 03:56 PM	#2
simt3k Drives: 2011 Camaro RS 2LT Join Date: Jul 2012 Location: Edmonton Alberta Canada Posts: 762	Good question, there's another thread but doesn't seem to have definitive numbers....

03-13-2013, 11:02 PM	#7
Yellow_Glide Drives: 2011 1LT "Chakita". 04 Yota Join Date: Jun 2011 Location: Round Rock, TX Posts: 823	Keep checking - there are two dynojet sheets done in FL. The autotek sheet you posted is my original baseline from March 2012 done in TX before we started the project. __________________ Hi, my name is Chakita. I have cams!!!! Build thread: http://www.camaro5.com/forums/showthread.php?p=3847083

03-14-2013, 01:41 AM	#8
kuzman89 Drives: Ly7 Join Date: Dec 2011 Location: bezza Posts: 253	Come on guys get some cams!! I'll be throwing a set in once the tuning for the SC is 100%.

03-15-2013, 01:09 AM	#10
kuzman89 Drives: Ly7 Join Date: Dec 2011 Location: bezza Posts: 253	I've had a Vortech on my car for 8 months lol, by tune 100% I meant back and forth with Steve and Vince. I got another retune today, so hopefully it'll run a bit better now.

03-15-2013, 01:50 AM	#11
Risky guy Drives: 2012 mitsubishi evolution mr Join Date: Mar 2013 Location: New York Posts: 110 View My Garage	With cams you made 256whp 233tq with cams? Made 296awhp 292awtq just from a tune. Not a v6 but, that's the + with turbos. What was your baseline tune? Or is that your baseline? __________________ 2012 Mitsubishi evolution x MR Tc-sst. Ecu tek custom tune by Ivey league performance. 2012 Nissan juke 1.6 dig turbo stock dd.

03-15-2013, 03:23 AM	#12
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	That's the baseline __________________ Click Picture for Build Thread

03-15-2013, 10:09 AM	#14
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	u can cam a v6? __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!