06-15-2011, 09:30 PM | #1 |
Boiler Up!! POTFH
|
About to trade-in my Camaro...
And get a 2SS/RS
Still haven't pulled the trigger yet as I'm still weighing my options right now. Currently, I have a 2010 1LT/RS. Only extras I have on it are front/back black bowtie decals, tinted windows, and Lloyd custom mats (which btw I would keep and sell them here, so if you're looking for some nice red trim/"Camaro RS" Lloyd mats, PM me). The one I'm looking to get is a 2011 2SS/RS IOM fully loaded automatic (although no GFX, which I;m considering to get from the dealer if I happen to go through with this) w/ white racing stripes that is $4000 off MSRP (MSRP is $40,800)- realistically how good is $4k off a brand new 2011? I think it's pretty solid but wondered if that's about average, above avg, or I could get more? My car has just over 30,000 miles in just over 2 years (bought May 2009) and they are offering $22k for it - Kelly Blue book for a private sell value of about $24k (dealer trade-in was $23,275k) so I tried getting them to go higher but they didnt budge much (orignally they started at $21k, then they wouldnt go past $22k) Some things that I like about the IOM that I don't have in the LT: 1. Obviously the increase in power 2. The sound/rumble (will eventually do a muffler delete) 3. HUD 4. Sunroof 5. Stripes (although still unsure what looks better on IOM - white or black? ) 6. Leather, orange interior 7. Orange door panels, dash trim 8. Aux. gauge pack 9. Polished wheels (i like them a bit better than the Midnight Finish I currently have) In addition to the Camaro I'll be trading in my 07 Silverado as I don't have a use for two cars right now. hmmm...should I do it
__________________
Last edited by Purdue2011SS; 06-15-2011 at 09:55 PM. |
06-15-2011, 09:33 PM | #2 |
502 RWHP N/A
|
Up to you, I had my 1LT as long as you have, and traded up to a 2ss just as long as u feel comfortable with payments and gas, go for it. I got $2,000 off msrp and free stripes since it didn't have them
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
06-15-2011, 09:33 PM | #3 |
Guest
Join Date: Jun 2009
Location: PA
Posts: 4,812
|
Sounds like a pretty solid deal.
|
06-15-2011, 09:36 PM | #4 |
Boiler Up!! POTFH
|
yea it would add 2 more years to my loan and $100/month moreon my payment...basically is that worth it is my dilemma
__________________
|
06-15-2011, 09:36 PM | #5 |
Drives: 2011 IOM LS, 2011 CGM LS Join Date: Oct 2010
Location: Orlando, Fl
Posts: 836
|
Seems like a pretty good deal. I'd go for it.
__________________
2011 IOM LS - Drag DR 19s 18x7.5, Projector/Halo Fogs, Blacked out Gills, Red Calipers, Factory Spoiler, 15% Tint
2011 CGM LS- Injen CAI, Vmax Ported TB, Vmax Black Ice O'Lator, Carbon Fiber Bowties, Carbon Fiber Gills, Factory Spoiler, Stock SS Exhaust w/ Magnaflow x-pipe welded in & stock muffler delete, Miro 112 18x8.5 +35 |
06-15-2011, 09:40 PM | #6 | |
502 RWHP N/A
|
Quote:
I would say yes the extra hundred is bout where im at it's no big deal
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
06-15-2011, 09:42 PM | #7 |
502 RWHP N/A
|
How bout this, have you test drove one...that will help you decide
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
06-15-2011, 09:43 PM | #8 |
Drives: 2010 Rally Yellow 2SS RS Join Date: Oct 2010
Location: Savannah, Ga
Posts: 452
|
Only 100 more a month, add about 100 more a month( depending your daily commute) in more gas at a higher price(premium), and insurance going up some. Realisticly probably a $200-$300 a month more increase from your payment now. It would be worth it to have a muscle car with a muscle motor to match it...
|
06-15-2011, 09:43 PM | #9 |
Support Bill A09426!
Drives: 2011 2SS/RS Join Date: May 2011
Location: Penfield, NY
Posts: 165
|
You probably spend 100 a month on beer and takeout. I say forgo some of it and use it on something that extracts emotion from you.
__________________
2011 Camaro 2SS/RS, SW/IO Stripes. 2007 XLR-V. Is it normal to feel euphoria in a car?
|
06-15-2011, 09:44 PM | #10 | |
Boiler Up!! POTFH
|
Quote:
and $100 more a month is very manageable to me, but adding 2 more years on the loan is a bit of an issue down the road
__________________
|
|
06-15-2011, 09:46 PM | #11 |
Guest
Join Date: Jun 2009
Location: PA
Posts: 4,812
|
I missed the part about trading in a truck also. Judging from the miles on your current car and the fact that your getting rid of your truck I would stay with a V-6. The SS is liable to eat you out of house and home if it's going to be your daily driver. I you have the spare coin and it's not going to make things tight then go for it. Other wise, I would say don't do it.
|
06-15-2011, 09:47 PM | #12 |
502 RWHP N/A
|
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
06-15-2011, 09:47 PM | #13 | |
502 RWHP N/A
|
Quote:
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
06-15-2011, 09:48 PM | #14 | ||
Boiler Up!! POTFH
|
Quote:
Quote:
back when i was in school I'd say yes but now, I've toned it down just a tad
__________________
|
||
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does the v6 have enough power? | cstproductions | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 305 | 08-29-2012 09:27 PM |
Im sure this has been asked before.. But forgive my innocence :) | gmag21 | Suspension / Brakes / Chassis | 23 | 02-21-2010 10:29 PM |
Drag Racing Suspension Kits | Info@PeddersUSA.com | Suspension / Chassis / Brakes | 25 | 02-21-2010 08:48 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |