You are browsing camaro5 
 |
|
06-25-2012, 03:26 PM
|
#1 |
 
Drives: '10 Blk Camaro SS/'08 Blk Silverado Join Date: Feb 2011
Location: OKLA
Posts: 466
|
Removing Cowl grill
trying to see if there is any problems removing the washer blade/arms from the cowl grill as I want to hydrodip my cowl.Will the arms just slide off after removing the nut or is there a special tool to pull them off?
anyone done this already...? Thanks for the help/info... |
|
|
|
06-26-2012, 08:37 AM
|
#2 |
 Drives: SS camaro Join Date: Apr 2011
Location: Pasadena Texas
Posts: 135
|
The arms will give you a bit of a problem but with a little twisting they will come off pretty easy after the nut is removed.
|
|
|
|
|
06-26-2012, 03:24 PM
|
#3 |
|
Drives: '10 Blk Camaro SS/'08 Blk Silverado Join Date: Feb 2011
Location: OKLA
Posts: 466
|
Thanks,
 what i needed to know
|
|
|
|
|
06-26-2012, 06:23 PM
|
#4 |
|
LS1 to a LS2 to a LS3
Drives: 2011 Camaro 2SS/RS IBM Join Date: Apr 2008
Location: Suffolk County LI
Posts: 197
|
Those wipers arms are a total paint to remove. I found by kinda pushing in the middle of the arm, it takes some of the tension away and it makes it eaiser to remove.
|
|
|
|
|
08-14-2012, 11:04 AM
|
#5 |
|
LED god
Drives: 2010 Inferno Orange Camaro SS/RS Join Date: Oct 2010
Location: Las Vegas, NV
Posts: 537
|
Took off bolts, twisted pried and pulled for 5 min. No luck, not a mm. I drive a early 2010 and have never been off. Any suggestions? Gonna buy a battery terminal puller today. I did all this on the one I could reach, the other...
Thanks in advance
__________________
|
|
|
|
|
|
|
|
 |
|
|
