American Racing Headers for 2010 Camaro yields +32rwhp w/o tune, +50rwhp with tune - Page 14 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

luckynuts · 07-30-2009, 11:51 PM

Quote:

Originally Posted by FASST 1

Just to confirm the claims, I just had my L99 tuned and on the Dyno. I got an increase of 58 hp and 82 ftlb of torque with ARH headers and cats (stock muffler) and New Era CAI. Gotta love that increase in torque!

Great numbers seem to fall in line with headers, cats and tune but doesn't leave much of a gain from the CAI????

mike@newera · 07-30-2009, 11:59 PM

Quote:

Originally Posted by luckynuts

Great numbers seem to fall in line with headers, cats and tune but doesn't leave much of a gain from the CAI????

Are you kidding me?????? Those are rediculous gains with the combo of both!!!! My car only got 41 rwhp and 50 rwtq from both combined, I don't recall anyone getting even close to that much torque just from just the headers and tune with an L99, you should be real happy with your set up as a whole!! Great gains bro!

Then again, something else to think about, take it to the track, My car did gain 8 mph in the 1/4 mile from our intake, ARH system, and a tune which on a dyno would equate to 80 rwhp, bottom line is this set up works no matter what the dyno measures...

FTI-EDC · 07-31-2009, 08:54 AM

Quote:

Originally Posted by mike@newera

Are you kidding me?????? Those are rediculous gains with the combo of both!!!! My car only got 41 rwhp and 50 rwtq from both combined, I don't recall anyone getting even close to that much torque just from just the headers and tune with an L99, you should be real happy with your set up as a whole!! Great gains bro!

Then again, something else to think about, take it to the track, My car did gain 8 mph in the 1/4 mile from our intake, ARH system, and a tune which on a dyno would equate to 80 rwhp, bottom line is this set up works no matter what the dyno measures...

Set them all straight with the facts Mike!

Ed

fieldgoal00 · 07-31-2009, 09:19 AM

Has anyone that has bought these and added an exhaust made a setup that sounds as aggressive as Tag's Stainless Works system?

FASST 1 · 07-31-2009, 09:45 AM

I have heard an AMR system that was louder than Tag's if that equates to more aggressive. After you put on TL headers and replace everything back to the axel with 3" I think what matters then to get the sound you want depends more on the exhaust. I believe Tag has a THR muffler. The one I heard was almost a straight pipe.

FASST 1 · 07-31-2009, 09:45 AM

Sorry that was an "ARH system" not AMR

SMGSS · 07-31-2009, 10:36 AM

Quote:

Originally Posted by FASST 1

Just to confirm the claims, I just had my L99 tuned and on the Dyno. I got an increase of 58 hp and 82 ftlb of torque with ARH headers and cats (stock muffler) and New Era CAI. Gotta love that increase in torque!

That is an AWESOME Torque gain, get us some 1/4 mile times!

luckynuts · 07-31-2009, 04:38 PM

Quote:

Originally Posted by mike@newera

Are you kidding me?????? Those are rediculous gains with the combo of both!!!! My car only got 41 rwhp and 50 rwtq from both combined, I don't recall anyone getting even close to that much torque just from just the headers and tune with an L99, you should be real happy with your set up as a whole!! Great gains bro!

Then again, something else to think about, take it to the track, My car did gain 8 mph in the 1/4 mile from our intake, ARH system, and a tune which on a dyno would equate to 80 rwhp, bottom line is this set up works no matter what the dyno measures...

No need to be defensive as I'm sure he's ecstatic and it works well. Like I said great numbers!!!!!!!!

Thread title is claiming 50rwhp and 45tq and fasst posted he got 58rwhp and 82tq on his L99 with the same setup plus a CAI. All I pointed out was that his numbers plus the CAI weren't that different from the initial claims. I did notice the big increase in torque which is where your going to make hay at the track. I wouldn't know about your cars dyno or track gains as the cyrstal ball is in storage.

CamaroV8 2SS · 08-02-2009, 10:25 AM

Does the ARH fits Corsa Exhaust System?

A.R. Headers · 08-02-2009, 10:43 AM

Quote:

Originally Posted by CamaroV8 2SS

Does the ARH fits Corsa Exhaust System?

Guys if you already have a Corsa system that comes forward and mates with the factory cat set up, we can set you with headers and cats to directly bolt up to the Corsa system. If you are purchasing a Corsa Axle back only then you'll need to mate up our system to theirs. I highly recommend using our system as a complete unit for two reasons, 1. Our X-pipe is 3" not 2-1/2" and 2. the system as a unit has long since proven it's capability to produce killer HP and Torque. Don't mess with success.

Keep in mind, we can fine tune our systems with various options for specific upgrades. A simple phone call is all it takes.

Nick

Croathlete · 08-05-2009, 07:38 AM

Do you believe that just the headers and cats (no x-pipe) would work well with the NoWeeds electronic cutouts?

khislop007 · 08-25-2009, 11:15 PM

Quote:

Originally Posted by FASST 1

Just to confirm the claims, I just had my L99 tuned and on the Dyno. I got an increase of 58 hp and 82 ftlb of torque with ARH headers and cats (stock muffler) and New Era CAI. Gotta love that increase in torque!

That's just bad a$$!

BigFish · 10-05-2009, 12:28 PM

Tom could PM me as well, Thanks

jsharp · 10-05-2009, 12:44 PM

How loud are they on inside of car on L99 I want to be able to use bluetooth and onstar without them thinking i am saying something I am not because of the noise. Also with the headers and noweeds cutouts that would put it close to 70rwhp since its 50for the headers and 20 on the cutouts that is insane! I really like that the car hooks so well though. Will this much hp gain break the tires loose bad or does it still hook good?

08-05-2009, 07:38 AM	#193
Croathlete Danny Drives: 2010 Camaro 2SS/RS Join Date: Nov 2007 Location: NYC Posts: 1,656	Do you believe that just the headers and cats (no x-pipe) would work well with the NoWeeds electronic cutouts? __________________ 2SS/RS CGM with black rally stripes DON_RAFA describing my Noweeds cutouts - "Very Strong. When I couldn't see you I still heard you. Sounds like your car is pissed at the world."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Pedders partnering with GM Racing on Camaro suspension	Info@PeddersUSA.com	Wheels and Tires Talk Sponsored by The Tire Rack	6	09-30-2008 12:14 PM
Camaro (concept) Press Release!!	Pencil.Fight	5th Gen Camaro SS LS LT General Discussions	4	07-21-2008 03:33 PM

07-31-2009, 09:19 AM	#186
fieldgoal00 Account Suspended Drives: 2010 Chevy Camaro 2SS/RS Join Date: Dec 2008 Location: New Orleans Posts: 769	Has anyone that has bought these and added an exhaust made a setup that sounds as aggressive as Tag's Stainless Works system?

07-31-2009, 09:45 AM	#187
FASST 1 Drives: Black 1SS Join Date: Apr 2009 Location: Pittsburgh, PA Posts: 442	I have heard an AMR system that was louder than Tag's if that equates to more aggressive. After you put on TL headers and replace everything back to the axel with 3" I think what matters then to get the sound you want depends more on the exhaust. I believe Tag has a THR muffler. The one I heard was almost a straight pipe.

07-31-2009, 09:45 AM	#188
FASST 1 Drives: Black 1SS Join Date: Apr 2009 Location: Pittsburgh, PA Posts: 442	Sorry that was an "ARH system" not AMR

08-02-2009, 10:25 AM	#191
CamaroV8 2SS Drives: Camaro 2SS V8 Join Date: Jul 2009 Location: Puerto Rico Posts: 7	Does the ARH fits Corsa Exhaust System?

10-05-2009, 12:28 PM	#195
BigFish Drives: 1971 Z28 Join Date: Sep 2009 Location: Morristown, In Posts: 119	Tom could PM me as well, Thanks

10-05-2009, 12:44 PM	#196
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	How loud are they on inside of car on L99 I want to be able to use bluetooth and onstar without them thinking i am saying something I am not because of the noise. Also with the headers and noweeds cutouts that would put it close to 70rwhp since its 50for the headers and 20 on the cutouts that is insane! I really like that the car hooks so well though. Will this much hp gain break the tires loose bad or does it still hook good?