Intake manifold question ? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HEAVYCHEVY10 · 12-18-2014, 03:05 PM

Would this work for a cam only 2010 ss ? Talked with them an they said it would work any thoughts ?

HEAVYCHEVY10 · 12-18-2014, 03:08 PM

Wrong area to post damn my phone, can some one move this sorry !

45thCAMARO 2SS/RS · 12-18-2014, 03:15 PM

Yes it will, but the issue isn't will it work on the engine. It's fitment issues too tall so you will need a cowl hood and also do some modifications to make it work. Look up some of the thread about Holley high rise intake ( this is basically the same thing just made by SLP)

HEAVYCHEVY10 · 12-18-2014, 04:04 PM

Quote:

Originally Posted by 45thCAMARO 2SS/RS

Yes it will, but the issue isn't will it work on the engine. It's fitment issues too tall so you will need a cowl hood and also do some modifications to make it work. Look up some of the thread about Holley high rise intake ( this is basically the same thing just made by SLP)

thanks im tracking hood issue, but didnt know about fitment issue but thanks for the answer!

HEAVYCHEVY10 · 12-18-2014, 08:10 PM

can some one move this for me to the bolt on section? TIA

Bo White · 12-18-2014, 08:47 PM

One of Lethals cars at fest in TX had a nice fab intake on it that cleared the cowl.

HEAVYCHEVY10 · 12-18-2014, 09:57 PM

I'm wondering if I would have to remove the wiper an cut for fitment as Ive heard about?

djpelosi · 12-19-2014, 09:05 AM

IF that's legit, $500 isn't a bad price at all. I'd certainly pay that more so than the $850 for the LSXR.

62nalide · 12-24-2014, 12:47 PM

Quote:

Originally Posted by 45thCAMARO 2SS/RS

Yes it will, but the issue isn't will it work on the engine. It's fitment issues too tall so you will need a cowl hood and also do some modifications to make it work. Look up some of the thread about Holley high rise intake ( this is basically the same thing just made by SLP)

It's not the SLP we all know of

HEAVYCHEVY10 · 12-24-2014, 01:33 PM

Quote:

Originally Posted by 62nalide

It's not the SLP we all know of

yeah i know, i found a old thread of yours and we reposted in the bolt on section under "are these legit". im wondering if its worth it to mod to manifold and what gains would i see???

hamilton2008 · 12-25-2014, 01:47 PM

if it fits under the stock hood then I say go for it. that's a good price and I don't see how it couldnt benefit your set up.

HEAVYCHEVY10 · 12-25-2014, 03:59 PM

Quote:

Originally Posted by hamilton2008

if it fits under the stock hood then I say go for it. that's a good price and I don't see how it couldnt benefit your set up.

The thing is I have to cut the back of The manifold off to clear the firewall .. That's the thing holding me up on trying it out . And would I get anything out of it at that point ?

Merc · 12-25-2014, 08:40 PM

Look's similar to the manifold on our COPO.

Bo White · 01-22-2015, 11:56 AM

He drives very good. ^^^^

12-18-2014, 03:05 PM	#1
HEAVYCHEVY10 TEAM NIGHTFURY Drives: 2010 2SS/RS Join Date: Jun 2014 Location: OAHU, HI Posts: 227	Intake manifold question ? Would this work for a cam only 2010 ss ? Talked with them an they said it would work any thoughts ? Attached Images __________________

12-18-2014, 03:08 PM	#2
HEAVYCHEVY10 TEAM NIGHTFURY Drives: 2010 2SS/RS Join Date: Jun 2014 Location: OAHU, HI Posts: 227	Wrong area to post damn my phone, can some one move this sorry ! __________________

12-18-2014, 03:15 PM	#3
45thCAMARO 2SS/RS xquest91x Drives: 2012 45th Anniversary 2SS/RS Join Date: Mar 2013 Location: Yuma, AZ Posts: 535 View My Garage	Yes it will, but the issue isn't will it work on the engine. It's fitment issues too tall so you will need a cowl hood and also do some modifications to make it work. Look up some of the thread about Holley high rise intake ( this is basically the same thing just made by SLP) __________________ 2012 45th Camaro 2SS/RS LS3 Driver Mod: Stage 5 Full Bolt-ons + Tune •418RWHP/420RWTQ• H/C + Bolt-ons + Tune •485RWHP/435RWTQ• Full BMR Stage 2&3 Suspension 3.91 1LE Gear Diff Swap MGW Short Throw Shifter

12-18-2014, 08:10 PM	#5
HEAVYCHEVY10 TEAM NIGHTFURY Drives: 2010 2SS/RS Join Date: Jun 2014 Location: OAHU, HI Posts: 227	can some one move this for me to the bolt on section? TIA __________________

12-18-2014, 08:47 PM	#6
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,019	One of Lethals cars at fest in TX had a nice fab intake on it that cleared the cowl. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

12-18-2014, 09:57 PM	#7
HEAVYCHEVY10 TEAM NIGHTFURY Drives: 2010 2SS/RS Join Date: Jun 2014 Location: OAHU, HI Posts: 227	I'm wondering if I would have to remove the wiper an cut for fitment as Ive heard about? __________________

12-19-2014, 09:05 AM	#8
djpelosi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: Cordova, TN Posts: 774	IF that's legit, $500 isn't a bad price at all. I'd certainly pay that more so than the $850 for the LSXR. __________________ 2010 Camaro 2SS M6 2" Stainless Power Longtube Headers 3" Full exhaust w/ Off-Road H-Pipe Bo White Ported Throttle Body Hurst Short Throw Shifter Best Time: 12.43 @ 114, 1.99 60' on stock wheels and stock tires Build Thread

12-25-2014, 01:47 PM	#11
hamilton2008 Account Suspended Drives: 2016 CAMARO SS/ gpi built Join Date: Dec 2014 Location: Cabot ar Posts: 374	if it fits under the stock hood then I say go for it. that's a good price and I don't see how it couldnt benefit your set up.

12-25-2014, 08:40 PM	#13
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,291	Look's similar to the manifold on our COPO. __________________ My Build Thread

01-22-2015, 11:56 AM	#14
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,019	He drives very good. ^^^^ __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X