02-09-2014, 05:09 PM | #141 | |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Quote:
|
|
02-09-2014, 05:20 PM | #142 |
Drives: 2010 Camaro SS Join Date: Jul 2010
Location: Monroe, Georgia
Posts: 717
|
It comes with 2 pieces that are probably 4 ft long each, it is not 4 ft total like their ad shows. There is plenty of hose with the kit.
|
02-09-2014, 05:31 PM | #143 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
Thanks, that's what I thought their ad was wrong. Based on ssmike's pictures, there's no way 2 foot per side would cut it.
__________________
|
02-09-2014, 05:31 PM | #144 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
Great pictures, thanks.
__________________
|
02-09-2014, 07:06 PM | #145 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
|
02-09-2014, 08:31 PM | #146 |
Drives: RY 2011 2SS A6 Join Date: Jul 2010
Location: Virginia
Posts: 997
|
Just remember mine terminated at the fog lights, not at the lower grille. That's what the extra foot on mine was needed for. Sounds like if you are going to the grille, 4' per side is plenty.
__________________
Dry sump LS7, cage, JPSS suspension, Wilwood brakes, fire suppression, ARH 3" headers/exhaust, Z/28 DSSV coilovers, Kirkey seats, TeamTech 6-point harnesses, 19" Forgeline GA3R, 325/30R19 Re11 tires, oil cooler, monster JPSS splitter/wickerbill, CAI, brake ducts. |
02-15-2014, 10:12 AM | #147 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
How is everyone securing the duct hose to the frame/suspension? I'm afraid of the tie wraps that were supplied in the kit will eventually wear through. I'm also concerned about the steel hose clamps doing the same.
|
02-15-2014, 04:06 PM | #148 | |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
Quote:
My old setup I used Velcro around the tubing and then ty-wrapped the Velcro to the control arms. I used 3/4 inch Velcro.
__________________
|
|
02-17-2014, 08:10 PM | #149 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
What's to stop debris from going in and plugging the ducts or hose? Is there a screen or something we should use?
|
02-17-2014, 08:17 PM | #150 | |
Drives: RY 2011 2SS A6 Join Date: Jul 2010
Location: Virginia
Posts: 997
|
Quote:
I did a screen to keep the big crap out - see post #115 in this thread, on page 5
__________________
Dry sump LS7, cage, JPSS suspension, Wilwood brakes, fire suppression, ARH 3" headers/exhaust, Z/28 DSSV coilovers, Kirkey seats, TeamTech 6-point harnesses, 19" Forgeline GA3R, 325/30R19 Re11 tires, oil cooler, monster JPSS splitter/wickerbill, CAI, brake ducts. |
|
02-17-2014, 09:24 PM | #151 | |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
Quote:
Went to Ace hardware and got some scraps of aluminum door screen.
__________________
|
|
02-18-2014, 07:07 AM | #152 |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
I like that screen, looks heavy duty! Where did you get the screen and Velcro wrap from. Most Velcro I've seen is 2 separate pieces, I can't quite figure out how that would work. Do you have any pics of the Velcro? Sorry for all the questions!
|
02-18-2014, 07:17 AM | #153 | |
Drives: RY 2011 2SS A6 Join Date: Jul 2010
Location: Virginia
Posts: 997
|
Quote:
https://www.pegasusautoracing.com/pr...asp?RecID=6263 You put a full loop of the velcro material around the hose with the fuzzy part pointing out. Then you put a full loop of the other velcro material with the hooks pointing in. Then, you jam the zip ties between the hooks and loops, or between the material and the hose. Could sent pix later in the week - am traveling. https://www.pegasusautoracing.com/pr...p?Product=3641 way more expensive than screen door but I wanted something really solid. I painted it black - it comes silver.
__________________
Dry sump LS7, cage, JPSS suspension, Wilwood brakes, fire suppression, ARH 3" headers/exhaust, Z/28 DSSV coilovers, Kirkey seats, TeamTech 6-point harnesses, 19" Forgeline GA3R, 325/30R19 Re11 tires, oil cooler, monster JPSS splitter/wickerbill, CAI, brake ducts. |
|
02-18-2014, 08:21 AM | #154 | |
BL1ZZRD
Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009
Location: Buffalo, NY
Posts: 7,840
|
Quote:
|
|
|
|
Tags |
brake, ducts |
|
|