![]() |
![]() |
#1 |
![]() Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013
Location: Georgia
Posts: 229
|
noweeds
if i have stock headers and a dynomax 3 inch catback exhaust, can i fit the 2.5 " noweeds exhaust diverters? or do i need the 3 inch ones?
__________________
2010 2SS/RS- every option possible in 2010
Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros. |
![]() |
![]() |
![]() |
#2 |
Retarded One-Legged Owl
Drives: 2010 Black Camaro 2SS Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,745
|
How is the 3" catback attached to the factory 2.5" catalytic converters?
Because the dynomax has a slightly different geometry than the ARH exhaust system, you may be better off getting this and this instead of trying to purchase their Camaro specific kits. Then you can put the cut-outs wherever you want in the exhaust system and line up the turn downs however you like. ![]() Note: You'll need to purchase two turn downs.
__________________
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013
Location: Georgia
Posts: 229
|
I'm not sure if I get what you mean...I becuse said anything about ARH...lol
__________________
2010 2SS/RS- every option possible in 2010
Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros. |
![]() |
![]() |
![]() |
#4 |
Retarded One-Legged Owl
Drives: 2010 Black Camaro 2SS Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,745
|
Their online store has a Camaro specific section.
Four of the options are 2.5" kits, one for the L99, one for the V6, one for the LS3, and one for a 2.5" ARH exhaust system. Their only 3" Camaro-specific kit is actually specific to a 3" ARH exhaust system. Therefore, if you have a 3" Dynomax cat-back exhaust system, then more than likely none of the kits in their website's Camaro specific section will be optimal for your application. Therefore, I gave you the links to their generic 3" cutouts as well as the link to the optional turn-down. ![]()
__________________
|
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2010 Camaro 2SS/RS Join Date: Feb 2013
Location: Georgia
Posts: 229
|
Yeah that's what I was saying...I think lol. I'm still confused somewhat.
__________________
2010 2SS/RS- every option possible in 2010
Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights. Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps. Exterior lights- tinted tail lights and sidemarker lights. Wheels- powdercoated stock RS 20' wheels black Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete. Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros. |
![]() |
![]() |
![]() |
#6 |
![]() Drives: 2010 Camaro 2SS Join Date: Mar 2012
Location: Dayton, Nevada
Posts: 53
|
E-mail or call them (Noweeds). Their very helpful. Were with me anyway.
__________________
|
![]() |
![]() |
|
|
![]() |
|
|