plastic screws and nuts holding small black spoiler under front bumber - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cm5217 · 12-19-2009, 09:40 AM

to anyone that has put the ground effects on their car...not sure if you have to remove the small black spoiler under the front bumber and if you do not sure if you have to reuse the black plastic bolts and nuts but if you dont and if anyone still has them i am in need....I was coming out of my road last sat. and rounded a corner and bam there is a deer in the road cant go into the other lane as a car was coming going to fast to lock up and cant hit the guard rail so only choice run over it..so it riped off the small black spoiler off the bumber. I have the spoiler but only have 3 of the 16 bolts and nuts. I go to my dealer and they want 3.50 for each part meaning 3.50 for the bolt and 3.50 for the nut so thats 7.00 times 16 plus shipping they want like 130.00. dont want to spend that much so i was hoping someone on here might have them. and before everone asks i was also thinking about using someother type of plastic bolts but these bolts are the type that come off under this type of thing as it saved my bumber you would have to see them to understand. anyway if someone has any of these please send me a pm and i will make you a offer for them i am posted a pic of the bolt and nut so you know what i am talking about thanks again for anyones help.

66DeuceLS1 · 12-19-2009, 09:47 AM

just an option...run to your local hardware or paint supply store that has a good selection of hardware and find something close to the size, length, and use washers for the larger surface area clamping. Since none of these are visible unless you are under the car, you can improvise and save tons of $$$

cm5217 · 12-20-2009, 08:05 AM

...

cm5217 · 12-23-2009, 07:46 PM

still looking

MK69RSSS · 12-25-2009, 10:08 AM

Go to Lowes they got them....

cm5217 · 12-30-2009, 03:22 PM

no they dont

full of days · 12-30-2009, 03:26 PM

fastenall.com is your friend

also try www.auto-plastic-clips.com

Angrybird 12 · 12-30-2009, 03:31 PM

do they have a part number on them? go to gmpartsdirect and see if they carry them.
or do an online search for automotive plastic trim retainers

multiSS · 03-10-2010, 04:08 AM

Try a local bodyshop

Texzen · 04-15-2011, 06:48 PM

Old thread, I know....but for those interested, I just bought nylon bolts, nuts and washers that work for around 12 bucks from Home Depot. I'm sure Lowe's would have the same.

Row · 11-08-2016, 12:28 PM

Just a FYI
GM part no. for bolt is 11610747, nut is 11610748
Car-pak.com no. for both is 99-8867
These numbers are good for my 2014 RS.
You can find them for less than $1/ea in packs of 10 or 15.
I know this is an old thread but it took me a while to find the info.
Hope this helps someone.

b4wheeler · 11-08-2016, 04:45 PM

Ebay

10 nut and 10 bolts $21.00

http://www.ebay.com/itm/1-Kit-of-10-...tW3axR&vxp=mtr

Same deal $16.95

http://www.ebay.com/itm/1-Kit-of-10-...JXbfKL&vxp=mtr

jrhagen · 11-08-2016, 05:54 PM

Go to Lowe's and buy some nylon bolts and wing nuts. They are white and cost the same for 10 sets as Chevy wants for 1.

Texzen · 11-09-2016, 08:28 AM

Quote:

Originally Posted by jrhagen

Go to Lowe's and buy some nylon bolts and wing nuts. They are white and cost the same for 10 sets as Chevy wants for 1.

That's exactly what I did for mine.

Sent from my Nexus 6P using Tapatalk

12-19-2009, 09:40 AM	#1
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	plastic screws and nuts holding small black spoiler under front bumber to anyone that has put the ground effects on their car...not sure if you have to remove the small black spoiler under the front bumber and if you do not sure if you have to reuse the black plastic bolts and nuts but if you dont and if anyone still has them i am in need....I was coming out of my road last sat. and rounded a corner and bam there is a deer in the road cant go into the other lane as a car was coming going to fast to lock up and cant hit the guard rail so only choice run over it..so it riped off the small black spoiler off the bumber. I have the spoiler but only have 3 of the 16 bolts and nuts. I go to my dealer and they want 3.50 for each part meaning 3.50 for the bolt and 3.50 for the nut so thats 7.00 times 16 plus shipping they want like 130.00. dont want to spend that much so i was hoping someone on here might have them. and before everone asks i was also thinking about using someother type of plastic bolts but these bolts are the type that come off under this type of thing as it saved my bumber you would have to see them to understand. anyway if someone has any of these please send me a pm and i will make you a offer for them i am posted a pic of the bolt and nut so you know what i am talking about thanks again for anyones help. Attached Images

12-19-2009, 09:47 AM	#2
66DeuceLS1 Drives: 2010 2SS/RS SIM M6 Hockey Kit Join Date: Aug 2009 Location: Platte City, MO Posts: 92	just an option...run to your local hardware or paint supply store that has a good selection of hardware and find something close to the size, length, and use washers for the larger surface area clamping. Since none of these are visible unless you are under the car, you can improvise and save tons of $$$ __________________ 2SS/RS SIM M6 Polished 20's, Hockey Strips, GFX, Kooks LT's, High flow CATS, Magnaflow x-pipe, Vararam CAI

12-30-2009, 03:26 PM	#7
full of days Drives: Camaro GT Join Date: Dec 2009 Location: Charlotte Posts: 723	fastenall.com is your friend also try www.auto-plastic-clips.com __________________ *Post Tenebras Lux*

12-30-2009, 03:31 PM	#8
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	do they have a part number on them? go to gmpartsdirect and see if they carry them. or do an online search for automotive plastic trim retainers __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

11-08-2016, 04:45 PM	#12
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	Ebay 10 nut and 10 bolts $21.00 http://www.ebay.com/itm/1-Kit-of-10-...tW3axR&vxp=mtr Same deal $16.95 http://www.ebay.com/itm/1-Kit-of-10-...JXbfKL&vxp=mtr __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

12-20-2009, 08:05 AM	#3
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	...

12-23-2009, 07:46 PM	#4
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	still looking

12-25-2009, 10:08 AM	#5
MK69RSSS Drives: TOO MANY TO LIST Join Date: Aug 2009 Location: MADISON MS Posts: 77	Go to Lowes they got them....

12-30-2009, 03:22 PM	#6
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	no they dont

03-10-2010, 04:08 AM	#9
multiSS Drives: 69 SS396 chevelle 2010 2ssrs camaro Join Date: Oct 2009 Location: Alberta Posts: 71	Try a local bodyshop

04-15-2011, 06:48 PM	#10
Texzen Drives: 2013 SW 2SS/RS/1LE Join Date: May 2010 Location: FAR NW Austin, TX Posts: 261 View My Garage	Old thread, I know....but for those interested, I just bought nylon bolts, nuts and washers that work for around 12 bucks from Home Depot. I'm sure Lowe's would have the same.

11-08-2016, 12:28 PM	#11
Row Drives: 2014 2LT Coupe Silver Ice RS Auto Join Date: Nov 2016 Location: Royse City, TX Posts: 1	Just a FYI GM part no. for bolt is 11610747, nut is 11610748 Car-pak.com no. for both is 99-8867 These numbers are good for my 2014 RS. You can find them for less than $1/ea in packs of 10 or 15. I know this is an old thread but it took me a while to find the info. Hope this helps someone.

11-08-2016, 05:54 PM	#13
jrhagen Banned Drives: Camaro Join Date: Mar 2013 Location: USA Posts: 2,701	Go to Lowe's and buy some nylon bolts and wing nuts. They are white and cost the same for 10 sets as Chevy wants for 1.