Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
BeckyD @ James Martin Chevy
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro Photos | Spyshots | Video | Media Gallery


Reply
 
Thread Tools
Old 06-11-2013, 09:56 PM   #2479
LIM3
it's mind bottling..
 
LIM3's Avatar
 
Drives: SGM
Join Date: Apr 2011
Location: miami floirda.
Posts: 5,393
Quote:
Originally Posted by ForgedReality View Post
Thanks.

Holy crap. Those are decent prices, but then it's $10 to ship. And how close is the match? And then you have to wait.

I drive 20 minutes out to Sherwin Williams Automotive (the "Automotive" part is important), and have them mix me up a can or two while I wait. I think it comes out to about the same, and then I can drive home and start using it immediately.

They also have the 2k clearcoat which is what you'll need if you want a factory-hard clear. It's in a can with a capsule of hardener inside that you puncture with a button on the bottom and when you mix it up, you have 48 hours to use it before it hardens in the can. Great stuff though. Just make sure you have a big enough job that you don't waste most of it.
so you just ask your dealer and they will get you the SGM paint ?
__________________
LIM3 is offline   Reply With Quote
Old 06-12-2013, 04:29 AM   #2480
With envy
It's a Synergy thing..
 
With envy's Avatar
 
Drives: 2010 Synergy
Join Date: Jul 2011
Location: Buckley, WA
Posts: 1,586
Quote:
Originally Posted by LIM3 View Post
Would. 3 gal air compressor tank and the autozone paint spray guns work well if I'm custom painting something ? I hate aerosol cans
Yeah, that'll work fine for small jobs. And if you take your time and get the hang of using the equipment, it should give you good results. Just remember; prep-work is everything. Dust is your enemy!
__________________
It's a Camaro thing...
Not everybody who drives a Camaro "gets it"...But everybody that "gets it", drives a Camaro! -GG

With envy is offline   Reply With Quote
Old 06-12-2013, 10:22 AM   #2481
ForgedReality
Envy
 
ForgedReality's Avatar
 
Drives: 2011 SGM 2SS/RS - Black hood/hockey
Join Date: Aug 2011
Location: Renton, WA
Posts: 910
Quote:
Originally Posted by LIM3 View Post
so you just ask your dealer and they will get you the SGM paint ?
Dealers don't know jack. All they can get you is those little touch up paint bottles anyway. You need to get it custom mixed, either online or at a local store or shop. Just give them the paint code.

But yeah I'd never use rattle cans on bodywork. Anything that goes up against the existing factory paint just won't match all that well due to a lot of factors. Mostly, the metallic elements in the paint will make it look off because they weren't laid down at the same time, so at different angles, you'll be able to spot the repaint with metallic colors. However, the color looks great every time I've used it. I painted my rims, strut tower brace, and three different computer mice with it. As long as it's not a body panel right up against another one, you can't tell.
ForgedReality is offline   Reply With Quote
Old 06-12-2013, 10:40 AM   #2482
LIM3
it's mind bottling..
 
LIM3's Avatar
 
Drives: SGM
Join Date: Apr 2011
Location: miami floirda.
Posts: 5,393
Quote:
Originally Posted by ForgedReality View Post
Dealers don't know jack. All they can get you is those little touch up paint bottles anyway. You need to get it custom mixed, either online or at a local store or shop. Just give them the paint code.

But yeah I'd never use rattle cans on bodywork. Anything that goes up against the existing factory paint just won't match all that well due to a lot of factors. Mostly, the metallic elements in the paint will make it look off because they weren't laid down at the same time, so at different angles, you'll be able to spot the repaint with metallic colors. However, the color looks great every time I've used it. I painted my rims, strut tower brace, and three different computer mice with it. As long as it's not a body panel right up against another one, you can't tell.
Oh boy, and I need to get my fenders replaced soon.
Maybe if I blend the new bumper, hood, fenders it will all Match up better opposed to painting on piece of the car
__________________
LIM3 is offline   Reply With Quote
Old 06-12-2013, 01:48 PM   #2483
Dragonlady
Lovin' it!
 
Dragonlady's Avatar
 
Drives: 2010 Synergy or a '83 Z-28.
Join Date: May 2012
Location: Buckley, WA
Posts: 935
Quote:
Originally Posted by ForgedReality View Post
Dealers don't know jack. All they can get you is those little touch up paint bottles anyway. You need to get it custom mixed, either online or at a local store or shop. Just give them the paint code.

But yeah I'd never use rattle cans on bodywork. Anything that goes up against the existing factory paint just won't match all that well due to a lot of factors. Mostly, the metallic elements in the paint will make it look off because they weren't laid down at the same time, so at different angles, you'll be able to spot the repaint with metallic colors. However, the color looks great every time I've used it. I painted my rims, strut tower brace, and three different computer mice with it. As long as it's not a body panel right up against another one, you can't tell.
FYI Forged, we have a great paint/body guy in Sumner. He repaired a nasty door ding and paint. This wasn't something we could repair ourselves and he did a fantastic job.
Now I just have to get brave and start doing some of those other projects on the list....


__________________
Good friends don't let you do stupid things.....alone.....
Dragonlady is offline   Reply With Quote
Old 06-12-2013, 10:08 PM   #2484
With envy
It's a Synergy thing..
 
With envy's Avatar
 
Drives: 2010 Synergy
Join Date: Jul 2011
Location: Buckley, WA
Posts: 1,586
Quote:
Originally Posted by ForgedReality View Post
Thanks.

Holy crap. Those are decent prices, but then it's $10 to ship. And how close is the match? And then you have to wait.
You've seen it for yourself. I showed you at the Synergys for St. Patricks Day meet. I did all the scuffs on my front fascia. It took a lot of color sanding and buffing, but I got it closer than I would have expected for rattle-can. Mind you, it's confined mostly to the underside of the fascia, or I never would have considered trying it that way.


Quote:
Originally Posted by ForgedReality View Post

But yeah I'd never use rattle cans on bodywork. Anything that goes up against the existing factory paint just won't match all that well due to a lot of factors. Mostly, the metallic elements in the paint will make it look off because they weren't laid down at the same time, so at different angles, you'll be able to spot the repaint with metallic colors. However, the color looks great every time I've used it. I painted my rims, strut tower brace, and three different computer mice with it. As long as it's not a body panel right up against another one, you can't tell.
You're right about that. When I took a class in automotive painting, they had a paint panel (a 2'x3' piece of sheet metal we used for practice) divided into a grid of a dozen or so squares, each a completely different shade of metallic copper. As it turned out, it was all the same paint. Each square was painted with different pressures, distance, or other variables. So metallics are the trickiest, without a doubt. In the engine compartment surrounded by a lot of black, you won't be able to tell the difference. I painted my CAI with this paint, and it turned out great:

Name:  CAI 01.jpg
Views: 818
Size:  187.0 KB

Name:  CAI 03.jpg
Views: 757
Size:  121.9 KB
__________________
It's a Camaro thing...
Not everybody who drives a Camaro "gets it"...But everybody that "gets it", drives a Camaro! -GG

With envy is offline   Reply With Quote
Old 06-14-2013, 01:40 AM   #2485
OUR72GTO
2010 SIM Beige RS 6M
 
OUR72GTO's Avatar
 
Drives: SIM RS 6M 66 Corvair Silverado LTZ
Join Date: Oct 2008
Location: Kamloops,British Columbia
Posts: 4,637
There are still some SG Choko race jackets available. If you want one PM me. And a limited # of matching ball caps. (with the SG car under the brim)
__________________
CAMARO.. 2010 The Heart Beat is back in CHEVROLET
Now let's put it back in America
OUR72GTO is offline   Reply With Quote
Old 06-14-2013, 11:16 PM   #2486
ForgedReality
Envy
 
ForgedReality's Avatar
 
Drives: 2011 SGM 2SS/RS - Black hood/hockey
Join Date: Aug 2011
Location: Renton, WA
Posts: 910
Quote:
Originally Posted by OUR72GTO View Post
There are still some SG Choko race jackets available. If you want one PM me. And a limited # of matching ball caps. (with the SG car under the brim)
Clue me in.
ForgedReality is offline   Reply With Quote
Old 06-15-2013, 01:11 AM   #2487
With envy
It's a Synergy thing..
 
With envy's Avatar
 
Drives: 2010 Synergy
Join Date: Jul 2011
Location: Buckley, WA
Posts: 1,586
Quote:
Originally Posted by ForgedReality View Post
Clue me in.
We met OUR72GTO at the Dick's meet-n-eat put together by Tim Collett (RED DEMON SS) last year. He came all the way down from Kamloops, BC. Choko is a GM licensed clothing vendor that only sells in Canada. They have some really cool stuff! He was nice enough to leave us his catalog, and we still have it; I just saw it on the counter the other day. I'm thinking we might snag one of those jackets. Maybe he'll be nice enough to deliver one to us, either at the show-n-shine in Lillooet:

http://www.camaro5.com/forums/showthread.php?t=277114

Or maybe we can talk him into coming down to Wally's in August!:

http://www.camaro5.com/forums/showthread.php?t=282025

Canadian side: http://www.camaro5.com/forums/showthread.php?t=301447

What sizes you got?
__________________
It's a Camaro thing...
Not everybody who drives a Camaro "gets it"...But everybody that "gets it", drives a Camaro! -GG

With envy is offline   Reply With Quote
Old 06-15-2013, 07:17 PM   #2488
Ohten

 
Ohten's Avatar
 
Drives: Granite Crystal Challenger SRT
Join Date: Jan 2010
Location: West Palm Beach,FL by way of Akron,OH
Posts: 1,406
Bump
__________________
Ohten is offline   Reply With Quote
Old 06-21-2013, 01:34 PM   #2489
Triple A
 
Triple A's Avatar
 
Drives: 2011 Camaro SS/RS Synergy Green 6M
Join Date: Jun 2013
Location: Phoenix
Posts: 70
Picked up a 2011 Synergy Green 2SS/RS 6M the other week. Love the car!



__________________
2011 2SS/RS 6M
SLP Hood
ADM Performance CAI with Race Scoop
Hotchkis Strut Tower Brace and REar Chassis Brace
SLP 160 Thermostat
Triple A is offline   Reply With Quote
Old 06-21-2013, 03:16 PM   #2490
Retro69

 
Retro69's Avatar
 
Drives: 2011 2SS M6 Synergy Green
Join Date: Jun 2011
Location: Morgan, UT
Posts: 1,223
Very nice!
__________________

480 rwhp ERL 416 ci with JDP Stage II Big Bore Cam
JDP tune, CAI intake, Dynatech LT headers, hi-flow cats
VMAX CNC Ported TB. GMPP Z/28 suspension package
Prothane sub-frame bushings.
Retro69 is offline   Reply With Quote
Old 06-21-2013, 04:49 PM   #2491
Triple A
 
Triple A's Avatar
 
Drives: 2011 Camaro SS/RS Synergy Green 6M
Join Date: Jun 2013
Location: Phoenix
Posts: 70
Thanks! other than the punk kid who took out my passenger side mirror so thats in process of getting painted and getting installed.

__________________
2011 2SS/RS 6M
SLP Hood
ADM Performance CAI with Race Scoop
Hotchkis Strut Tower Brace and REar Chassis Brace
SLP 160 Thermostat
Triple A is offline   Reply With Quote
Old 06-21-2013, 04:57 PM   #2492
LIM3
it's mind bottling..
 
LIM3's Avatar
 
Drives: SGM
Join Date: Apr 2011
Location: miami floirda.
Posts: 5,393
Congrats on the new ride ! Sucks someone took out your mirror
__________________
LIM3 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OFFICIAL COLOR (and interior) Threads of all Camaro production colors Tran Camaro Photos | Spyshots | Video | Media Gallery 139 11-29-2017 11:29 AM
OK...I'm starting a better V6 exhaust examples thread!! KMPrenger Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 604 11-13-2017 04:26 PM
Does the v6 have enough power? cstproductions Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 305 08-29-2012 10:27 PM
Think about this and the Z28 5th gen 13F20 Camaro ZL1 Forum - ZL1 Specific Topics 41 09-04-2010 01:59 AM
Im sure this has been asked before.. But forgive my innocence :) gmag21 Suspension / Brakes / Chassis 23 02-21-2010 11:29 PM


All times are GMT -5. The time now is 02:21 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.