08-29-2010, 10:06 PM | #1 | |
I am cammed!
First off I must say that this forum and the sponsors are awsome!! I purchased everything from the sponsors here. Anyway, I chose the TSP 231/236 cam and I am glad I did. The guys at Texas Speed were very helpful and answered all my questions.
One of my good friends is an ASE certified mechanic so I figured I would hit him up for some help. I had to go out of town from Thursday-last night so I dropped my car off to him Wed night so he could start tearing it down. When I get to his house this morning it was already together and running, I was very delighted!! When I took it down the road I was very impressed, the drivability is great (which I have to give credit to Ted @ Jannetty). I contacted Ted a couple of weeks ago and ended up purchasing a SCT tuner and a Custom Cam tune. I still need to data log my car then dyno tweak it but I must say it feels as though Ted has nearly nailed it on the first attempt. I took a small vid earlier, I will try to post on here.. Chris |
||
08-29-2010, 10:16 PM | #2 |
Drives: 2012 ZL1 - #670 Join Date: Jun 2009
Location: Seminole, Fl.
Posts: 8,009
|
Badazz !!!
__________________
|
08-29-2010, 10:19 PM | #3 |
Drives: 1 Join Date: Mar 2010
Location: 2
Posts: 412
|
Awesome!
Get some more vids up when you can |
08-29-2010, 10:23 PM | #4 |
|
glad you like the cam, i plan on running this same cam, how does it sound at idle
__________________
my youtube
my facebook www.myspace.com/1djchampagne www.twitter.com/1djchampagne mods: borla long tube headers, borla atak catback, lingenfelter gt-9 cam, ported heads, ecs base kit running 11 psi on top end, 1" bmr drop spring, aam 3.70 gears, ported throttle body, 160* thermorstat, lethal racing tune 750/641 rwhp/rwtq |
08-29-2010, 10:25 PM | #5 |
Drives: V10 BMW M5, Supercharged 2SS/RS Join Date: Jun 2010
Location: Charlotte NC /Brooklyn NY
Posts: 2,305
|
Nice! There is a thread dedicated to cammed camaros, You might want to post your video here also.
http://www.camaro5.com/forums/showthread.php?t=100871
__________________
MAST 416 STROKER: STAGE 3 TVS 2300 CUSTOM CAM TPIS 102 TB IW 8 RIB PULLEY W/ OD COG REARS NX EXPRESS/NANO KIT KDI HEAT EXCHANGER/ROTOFAB RESERVOIR CIRCLE D 2800 TC/FLEX PLATE/ADM TRANS COOLER DSS DRIVESHAFT/1400 HP AXLES EATON TRUETRAC -LPE 3.27 GEARS DYNATECH HEADERS/MAGNAFLOW EXHAUST SQUASH RETURN STYLE FS ID 850's E85/ FLEXFUEL BMR/EIBACH SUSPENSION KILL MODE, ON. |
08-29-2010, 10:26 PM | #6 |
|
Awesome
__________________
Jannetty Racing JRE Street Package
|
08-29-2010, 10:27 PM | #7 |
sounds great, would like to hear it under acceleration and see what kinda power its putting out
|
|
08-29-2010, 10:36 PM | #8 |
Thanks guys! I plan to data log it maybe tomorrow evening so I can let Ted review it. When he gives me the green light I will dyno it and let him review it and tweak it again if needed. I am very happy with it so far!!
|
|
08-29-2010, 11:03 PM | #9 |
E.B.A.H.
Drives: you wild... Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,421
|
Man, I must admit, at first glance, I thought you typo'ed "scammed."
Congrats on the upgrades. =P |
08-29-2010, 11:23 PM | #10 |
Account Suspended
Drives: 2010 Challenger R/T;2011 Mustang GT Join Date: Jan 2010
Location: Texas
Posts: 2,105
|
Grats! A sound I will never achieve with my 5.0. Nothing much better sounding than a cammed car.
|
08-29-2010, 11:42 PM | #11 |
Drives: 2013 Camaro ZL1 Manual Join Date: Mar 2010
Location: Muskogee Oklahoma
Posts: 502
|
How much does a cam job set you back?
|
08-30-2010, 02:03 AM | #12 |
|
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ
T |
08-30-2010, 03:12 AM | #13 |
Drives: 10 Procharged SS Join Date: Oct 2009
Location: The creek at the end of the dead end road
Posts: 1,857
|
Sounds good! Wish you would have revved it up though in the video
|
08-30-2010, 05:18 AM | #14 |
Drives: 2012 Chevrolet Silverado 4x4 Z71 Join Date: Dec 2009
Location: WI.
Posts: 1,744
|
Got to love the sound of a cam. Love to just hear mine idle.
__________________
SOLD(Traded for 2012 Silverado Z71 4x4 and 2012 Sonic Hatch.)...2010 Camaro 1SS/RS/LS3,yellow with House of Kolor Tangerine Pearl rally stripes,manual trans.Hurst short throw shifter,4 pack rally gauges,Roto-Fab air intake,Kooks long tube headers with high-flow cats,Borla S-Type catback exhaust,Comp Cam,PRC ported heads,Maggie with 3.6 pulley and 1:1 cog drive,secondary fuel system with 65lb injectors,ADM digital A/F and Boost gauge,Pfadt trailing arms and subframe bushings.614.25rwhp/566.82rwtq on 8# of boost.
2012 Chevrolet Silverado 1500 EX.Cab 4X4 Z71. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cammed engine | Winslow | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 14 | 07-25-2010 11:41 AM |
Cammed car question......No tune | WICKEDSS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 7 | 07-21-2010 05:01 PM |
My Cammed Kenne Bell Vid | Fritostud | Forced Induction - V8 | 33 | 04-22-2010 05:57 AM |
Livernois Head/Stage 2R Max Cammed SS Idle/Dyno Video | Chris@Livernois | Camaro Photos | Spyshots | Video | Media Gallery | 1 | 03-05-2010 05:09 PM |
Can a Superchagered Z28 have a lumpey CAM, and sound like a NA heads and cammed LS3 | D-Unit | Forced Induction - V8 | 12 | 07-29-2008 03:34 PM |