AAC fog halo installation - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LED Crazy · 05-11-2011, 12:31 AM

Good evening Camaro family

I am pondering upon doing the halo fog light mod on my Camaro. I have seen a video from AAC on how to do the install from taking the light out and how to get the halo ring in there and seal it up. What I have not seen is where and how to wire it. Does anybody know what the next steps are? How do you connect the halo fog in order to get power to it? What would I have to do in order to make the fog halo come on with my headlight halos?

jjjaroscak · 05-11-2011, 04:21 PM

well the easiest solution would be just tap your headlight halo wires, the "correct" way of doing it is probably wiring it the exact same as you headlight wires

I did my fogs and headlight halos at the same time so I went the route of just wiring them the same way at the same time, had I done it at different times I probably would've just tapped the headlight halos since I don't see anything wrong with doing that and I'm lazy :-P

mikepage0007 · 05-11-2011, 07:13 PM

i did my fogs and headlights on seperate switch as i have drls...also i wanted to availablility to turn them on only and nothing else...

The Stig · 05-11-2011, 08:00 PM

Here you go

http://www.camaro5.com/forums/showthread.php?t=131838

LED Crazy · 05-11-2011, 08:24 PM

Thanks guys. I wish I could do both at the same time, but I do not have the skills to pull off the headlight install. I know I can have a shop here in Tulsa easily do the DRL halo install with ease and cheap too.

Shuffler · 05-11-2011, 08:50 PM

The Halos on GRN ENV are on a remote.

jjjaroscak · 05-12-2011, 10:17 AM

okay I miss-read your post a little, if you're doing dual color halos heres a simple diagram that I used
http://www.camaro5.com/forums/showpo...0&postcount=24

If you want to control the power of the halos you need to hook it up to a switch, I just connect the power of my halos to the side markers so they come on whenever my parking lights are on, if it's just a single color then you just need to find any good ground and you're good to go

05-11-2011, 12:31 AM	#1
LED Crazy okcamaros.com Drives: 2016 SS Join Date: May 2009 Location: Tulsa, Ok Posts: 1,753 View My Garage	AAC fog halo installation Good evening Camaro family I am pondering upon doing the halo fog light mod on my Camaro. I have seen a video from AAC on how to do the install from taking the light out and how to get the halo ring in there and seal it up. What I have not seen is where and how to wire it. Does anybody know what the next steps are? How do you connect the halo fog in order to get power to it? What would I have to do in order to make the fog halo come on with my headlight halos?

05-11-2011, 07:13 PM	#3
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	i did my fogs and headlights on seperate switch as i have drls...also i wanted to availablility to turn them on only and nothing else... Attached Images __________________

05-11-2011, 08:00 PM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Here you go http://www.camaro5.com/forums/showthread.php?t=131838 __________________

05-11-2011, 08:50 PM	#6
Shuffler God Bless Dawson Drives: Synergy for my Daughter Join Date: Feb 2010 Location: Texas Posts: 3,057	The Halos on GRN ENV are on a remote. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Challenger SRT-8 AAC Dual Color Halo's + HID kit for Fog lights (BANGIN DEAL!) FL	FINALLYSATISFIED	Local Marketplace	0	04-04-2011 04:27 PM
Dual Halo Fog Lights.	hclove09	USA - California	12	03-17-2011 11:00 PM
how to install fog halo lights ?	sub zero	Cosmetics and Lighting Modification Discussions	4	01-14-2011 11:26 PM
AAC RED HALO KIT!!! NEVER USED!	NoynuR	Exterior Parts & Accessories	6	01-04-2011 03:02 AM
F/S AAC Halo headlights and Fog Lights	jimmie.briseno	Audio / Visual / Electronics/ Gauges / Nav	8	09-26-2010 05:35 PM

05-11-2011, 04:21 PM	#2
jjjaroscak Drives: Cyber Gray 2011 2LT Camaro Join Date: Aug 2010 Location: Kern County, CA Posts: 168 View My Garage	well the easiest solution would be just tap your headlight halo wires, the "correct" way of doing it is probably wiring it the exact same as you headlight wires I did my fogs and headlight halos at the same time so I went the route of just wiring them the same way at the same time, had I done it at different times I probably would've just tapped the headlight halos since I don't see anything wrong with doing that and I'm lazy :-P

05-11-2011, 08:24 PM	#5
LED Crazy okcamaros.com Drives: 2016 SS Join Date: May 2009 Location: Tulsa, Ok Posts: 1,753 View My Garage	Thanks guys. I wish I could do both at the same time, but I do not have the skills to pull off the headlight install. I know I can have a shop here in Tulsa easily do the DRL halo install with ease and cheap too.

05-12-2011, 10:17 AM	#7
jjjaroscak Drives: Cyber Gray 2011 2LT Camaro Join Date: Aug 2010 Location: Kern County, CA Posts: 168 View My Garage	okay I miss-read your post a little, if you're doing dual color halos heres a simple diagram that I used http://www.camaro5.com/forums/showpo...0&postcount=24 If you want to control the power of the halos you need to hook it up to a switch, I just connect the power of my halos to the side markers so they come on whenever my parking lights are on, if it's just a single color then you just need to find any good ground and you're good to go