08-17-2013, 10:02 AM | #1 |
Drives: '12 ZL1 #1609 Join Date: Feb 2010
Location: Georgia
Posts: 1,762
|
CTS-V Parts on the ZL1
Anybody look into what CTSV parts might fit our car? d3cadillac.com has a bunch of intersting products. For example, check out the Harmonic Damper on this page, it's the best looking one I've found for the LSA engine.
I also wonder if this Racing Harness Kit would work in our cars, it would be perfect for the Recaro's seats for the weekend racer... Anyways, what all have you guys found that does/may work in our ZL1's?
__________________
Life is too short to drive cars that suck.
My build Thread |
08-17-2013, 10:13 AM | #2 |
Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012
Location: Chicago, IL
Posts: 733
|
IMO I don't see why it wouldn't work. All the other LSA pulleys work for the ZL1 and V
__________________
Procharged 2018 ZL1 A10
2018 2500HD Duramax |
08-17-2013, 10:41 AM | #3 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
I will be calling them on Monday to get info on having them install aftermarket seats and harnesses in my ZL1. I visited their facility when they first opened and had a Cadillac car show that we attended. If you love the Cadillac V series it's the wrong shop to visit!
|
08-17-2013, 11:22 AM | #4 |
Drives: '12 ZL1 #1609 Join Date: Feb 2010
Location: Georgia
Posts: 1,762
|
ZL1-V, Let us know if that harness is the right one!
__________________
Life is too short to drive cars that suck.
My build Thread |
08-17-2013, 12:36 PM | #5 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
It should be the same. I used Schroth harnesses in my Mustang and it used similar mounting points. It appears as if they attach to the rear connections that are used for children's car seats? If not they have to attach to bolt that holds the seat belt where the loop locks into. Those are only two possible points of attachment on the rear seats.
Last edited by ZL1-V; 08-17-2013 at 03:08 PM. |
08-17-2013, 01:51 PM | #6 |
Drives: 13 ZL1 SIM, 99 Z28 Black Join Date: Feb 2013
Location: Spokane, WA
Posts: 708
|
What about the tuning module. This shouldn't affect warranty, right?
http://d3groupinc.com/d3dtronic/
__________________
2018 C7 Z06 - WGG, M7. / 2013 ZL1 - SIM, 6 spd, RotoFab CAI, Can. / 1999 Z28 - Black, 6 spd, K&N, Subframe. / More Fun Stuff - www.inlandspeed.com
|
08-18-2013, 12:36 AM | #7 |
Drives: 2013 victory red ZL1. 2011 CTS-V Join Date: May 2011
Location: Streets of Dubai
Posts: 46
|
I have a CTS V and a ZL1. I am taking EVERY single thing off my V and putting it on my ZL1. The only thing that won't fit is the headers, other than that, everything will fit. Pulleys, snout, ported TB, injectors, etc etc etc etc. I even might go as far as fitting my Radiator and HX and see if it fits or not.
|
|
|
|
|