07-08-2013, 08:28 AM | #1 |
Drives: 2018 ZL1 A10 Join Date: Mar 2013
Location: Plano,TX
Posts: 224
|
Lg lowering springs
Since i installed my lowering springs i have a squak type noise from the rear over certain bumps. I took them off and lubed all rubber to metal contacts and it still has the noise. Any suggestions?
|
07-08-2013, 10:33 AM | #2 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Do they have any plastic sleeves over some of the coils? Maybe call or go by LG and have them listen and give you any suggestions.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
07-08-2013, 10:44 AM | #3 |
Drives: 2018 ZL1 A10 Join Date: Mar 2013
Location: Plano,TX
Posts: 224
|
No sleeves over any of the coils
|
07-08-2013, 11:49 AM | #4 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
|
07-08-2013, 11:59 AM | #5 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Yes....pretty much all the springs have sleeves on a coil or two to keep them from making noise. Check with LG and see if there were supposed to have sleeves and see it they'll let you switch them out with some that have them.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
07-10-2013, 11:31 AM | #6 |
Drives: 2018 ZL1 A10 Join Date: Mar 2013
Location: Plano,TX
Posts: 224
|
So i took the car and LG looked at it yesterday and they said the install is right, didnt ask about sleeves but i dont see them in any of the kits LG sells. Any idea what size sleeve you would get to install on them?
|
|
|
|
|